388 research outputs found
Future RAN architecture: SD-RAN through a general-purpose processing platform
In this article, we identify and study the potential of an integrated deployment solution for energy-efficient cellular networks combining the strengths of two very active current research themes: 1) software-defined radio access networks (SD-RANs) and 2) decoupled signaling and data transmissions, or beyond cellular green generation (BCG2) architecture, for enhanced energy efficiency. While SD-RAN envisions a decoupled centralized control plane and data-forwarding plane for flexible control, the BCG2 architecture calls for decoupling coverage from the capacity and coverage provided through an always-on low-power signaling node for a larger geographical area; the capacity is catered by various on-demand data nodes for maximum energy efficiency. In this article, we show that a combined approach that brings both specifications together can not only achieve greater benefits but also facilitate faster realization of both technologies. We propose the idea and design of a signaling controller that acts as a signaling node to provide always-on coverage, consuming low power, and at the same time host the control plane functions for the SDRAN through a general-purpose processing platform. The phantom cell concept is also a similar idea where a normal macrocell provides interference control to densely deployed small cells, although our initial results show that the integrated architecture has a much greater potential for energy savings than phantom cells
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Will SDN be part of 5G?
For many, this is no longer a valid question and the case is considered
settled with SDN/NFV (Software Defined Networking/Network Function
Virtualization) providing the inevitable innovation enablers solving many
outstanding management issues regarding 5G. However, given the monumental task
of softwarization of radio access network (RAN) while 5G is just around the
corner and some companies have started unveiling their 5G equipment already,
the concern is very realistic that we may only see some point solutions
involving SDN technology instead of a fully SDN-enabled RAN. This survey paper
identifies all important obstacles in the way and looks at the state of the art
of the relevant solutions. This survey is different from the previous surveys
on SDN-based RAN as it focuses on the salient problems and discusses solutions
proposed within and outside SDN literature. Our main focus is on fronthaul,
backward compatibility, supposedly disruptive nature of SDN deployment,
business cases and monetization of SDN related upgrades, latency of general
purpose processors (GPP), and additional security vulnerabilities,
softwarization brings along to the RAN. We have also provided a summary of the
architectural developments in SDN-based RAN landscape as not all work can be
covered under the focused issues. This paper provides a comprehensive survey on
the state of the art of SDN-based RAN and clearly points out the gaps in the
technology.Comment: 33 pages, 10 figure
Future RAN Architecture: SD-RAN Through a General-Purpose Processing Platform
In this article, we identify and study the potential of an integrated deployment solution for energy-efficient cellular networks combining the strengths of two very active current research themes: 1) software-defined radio access networks (SD-RANs) and 2) decoupled signaling and data transmissions, or beyond cellular green generation (BCG2) architecture, for enhanced energy efficiency. While SD-RAN envisions a decoupled centralized control plane and data-forwarding plane for flexible control, the BCG2 architecture calls for decoupling coverage from the capacity and coverage provided through an always-on low-power signaling node for a larger geographical area; the capacity is catered by various on-demand data nodes for maximum energy efficiency. In this article, we show that a combined approach that brings both specifications together can not only achieve greater benefits but also facilitate faster realization of both technologies. We propose the idea and design of a signaling controller that acts as a signaling node to provide always-on coverage, consuming low power, and at the same time host the control plane functions for the SDRAN through a general-purpose processing platform. The phantom cell concept is also a similar idea where a normal macrocell provides interference control to densely deployed small cells, although our initial results show that the integrated architecture has a much greater potential for energy savings than phantom cells
Millimeter Wave Cellular Networks: A MAC Layer Perspective
The millimeter wave (mmWave) frequency band is seen as a key enabler of
multi-gigabit wireless access in future cellular networks. In order to overcome
the propagation challenges, mmWave systems use a large number of antenna
elements both at the base station and at the user equipment, which lead to high
directivity gains, fully-directional communications, and possible noise-limited
operations. The fundamental differences between mmWave networks and traditional
ones challenge the classical design constraints, objectives, and available
degrees of freedom. This paper addresses the implications that highly
directional communication has on the design of an efficient medium access
control (MAC) layer. The paper discusses key MAC layer issues, such as
synchronization, random access, handover, channelization, interference
management, scheduling, and association. The paper provides an integrated view
on MAC layer issues for cellular networks, identifies new challenges and
tradeoffs, and provides novel insights and solution approaches.Comment: 21 pages, 9 figures, 2 tables, to appear in IEEE Transactions on
Communication
Random Access for Machine-Type Communication based on Bloom Filtering
We present a random access method inspired on Bloom filters that is suited
for Machine-Type Communications (MTC). Each accessing device sends a
\emph{signature} during the contention process. A signature is constructed
using the Bloom filtering method and contains information on the device
identity and the connection establishment cause. We instantiate the proposed
method over the current LTE-A access protocol. However, the method is
applicable to a more general class of random access protocols that use
preambles or other reservation sequences, as expected to be the case in 5G
systems. We show that our method utilizes the system resources more efficiently
and achieves significantly lower connection establishment latency in case of
synchronous arrivals, compared to the variant of the LTE-A access protocol that
is optimized for MTC traffic. A dividend of the proposed method is that it
allows the base station (BS) to acquire the device identity and the connection
establishment cause already in the initial phase of the connection
establishment, thereby enabling their differentiated treatment by the BS.Comment: Accepted for presentation on IEEE Globecom 201
- …