Robust Motion Segmentation from Pairwise Matches

In this paper we address a classification problem that has not been considered before, namely motion segmentation given pairwise matches only. Our contribution to this unexplored task is a novel formulation of motion segmentation as a two-step process. First, motion segmentation is performed on image pairs independently. Secondly, we combine independent pairwise segmentation results in a robust way into the final globally consistent segmentation. Our approach is inspired by the success of averaging methods. We demonstrate in simulated as well as in real experiments that our method is very effective in reducing the errors in the pairwise motion segmentation and can cope with large number of mismatches

Multibody modeling and verification

A summary of a ten week project on flexible multibody modeling, verification and control is presented. Emphasis was on the need for experimental verification. A literature survey was conducted for gathering information on the existence of experimental work related to flexible multibody systems. The first portion of the assigned task encompassed the modeling aspects of flexible multibodies that can undergo large angular displacements. Research in the area of modeling aspects were also surveyed, with special attention given to the component mode approach. Resulting from this is a research plan on various modeling aspects to be investigated over the next year. The relationship between the large angular displacements, boundary conditions, mode selection, and system modes is of particular interest. The other portion of the assigned task was the generation of a test plan for experimental verification of analytical and/or computer analysis techniques used for flexible multibody systems. Based on current and expected frequency ranges of flexible multibody systems to be used in space applications, an initial test article was selected and designed. A preliminary TREETOPS computer analysis was run to ensure frequency content in the low frequency range, 0.1 to 50 Hz. The initial specifications of experimental measurement and instrumentation components were also generated. Resulting from this effort is the initial multi-phase plan for a Ground Test Facility of Flexible Multibody Systems for Modeling Verification and Control. The plan focusses on the Multibody Modeling and Verification (MMV) Laboratory. General requirements of the Unobtrusive Sensor and Effector (USE) and the Robot Enhancement (RE) laboratories were considered during the laboratory development

A Model-Selection Framework for Multibody Structure-and-Motion of Image Sequences

Given an image sequence of a scene consisting of multiple rigidly moving objects, multi-body structure-and-motion (MSaM) is the task to segment the image feature tracks into the different rigid objects and compute the multiple-view geometry of each object. We present a framework for multibody structure-and-motion based on model selection. In a recover-and-select procedure, a redundant set of hypothetical scene motions is generated. Each subset of this pool of motion candidates is regarded as a possible explanation of the image feature tracks, and the most likely explanation is selected with model selection. The framework is generic and can be used with any parametric camera model, or with a combination of different models. It can deal with sets of correspondences, which change over time, and it is robust to realistic amounts of outliers. The framework is demonstrated for different camera and scene model

Articular human joint modelling

Copyright @ Cambridge University Press 2009.The work reported in this paper encapsulates the theories and algorithms developed to drive the core analysis modules of the software which has been developed to model a musculoskeletal structure of anatomic joints. Due to local bone surface and contact geometry based joint kinematics, newly developed algorithms make the proposed modeller different from currently available modellers. There are many modellers that are capable of modelling gross human body motion. Nevertheless, none of the available modellers offer complete elements of joint modelling. It appears that joint modelling is an extension of their core analysis capability, which, in every case, appears to be musculoskeletal motion dynamics. It is felt that an analysis framework that is focused on human joints would have significant benefit and potential to be used in many orthopaedic applications. The local mobility of joints has a significant influence in human motion analysis, in understanding of joint loading, tissue behaviour and contact forces. However, in order to develop a bone surface based joint modeller, there are a number of major problems, from tissue idealizations to surface geometry discretization and non-linear motion analysis. This paper presents the following: (a) The physical deformation of biological tissues as linear or non-linear viscoelastic deformation, based on spring-dashpot elements. (b) The linear dynamic multibody modelling, where the linear formulation is established for small motions and is particularly useful for calculating the equilibrium position of the joint. This model can also be used for finding small motion behaviour or loading under static conditions. It also has the potential of quantifying the joint laxity. (c) The non-linear dynamic multibody modelling, where a non-matrix and algorithmic formulation is presented. The approach allows handling complex material and geometrical nonlinearity easily. (d) Shortest path algorithms for calculating soft tissue line of action geometries. The developed algorithms are based on calculating minimum ‘surface mass’ and ‘surface covariance’. An improved version of the ‘surface covariance’ algorithm is described as ‘residual covariance’. The resulting path is used to establish the direction of forces and moments acting on joints. This information is needed for linear or non-linear treatment of the joint motion. (e) The final contribution of the paper is the treatment of the collision. In the virtual world, the difficulty in analysing bodies in motion arises due to body interpenetrations. The collision algorithm proposed in the paper involves finding the shortest projected ray from one body to the other. The projection of the body is determined by the resultant forces acting on it due to soft tissue connections under tension. This enables the calculation of collision condition of non-convex objects accurately. After the initial collision detection, the analysis involves attaching special springs (stiffness only normal to the surfaces) at the ‘potentially colliding points’ and motion of bodies is recalculated. The collision algorithm incorporates the rotation as well as translation. The algorithm continues until the joint equilibrium is achieved. Finally, the results obtained based on the software are compared with experimental results obtained using cadaveric joints

Differential-Algebraic Equations and Beyond: From Smooth to Nonsmooth Constrained Dynamical Systems

The present article presents a summarizing view at differential-algebraic equations (DAEs) and analyzes how new application fields and corresponding mathematical models lead to innovations both in theory and in numerical analysis for this problem class. Recent numerical methods for nonsmooth dynamical systems subject to unilateral contact and friction illustrate the topicality of this development.Comment: Preprint of Book Chapte

Middeck Active Control Experiment (MACE), phase A

A rationale to determine which structural experiments are sufficient to verify the design of structures employing Controlled Structures Technology was derived. A survey of proposed NASA missions was undertaken to identify candidate test articles for use in the Middeck Active Control Experiment (MACE). The survey revealed that potential test articles could be classified into one of three roles: development, demonstration, and qualification, depending on the maturity of the technology and the mission the structure must fulfill. A set of criteria was derived that allowed determination of which role a potential test article must fulfill. A review of the capabilities and limitations of the STS middeck was conducted. A reference design for the MACE test article was presented. Computing requirements for running typical closed-loop controllers was determined, and various computer configurations were studied. The various components required to manufacture the structure were identified. A management plan was established for the remainder of the program experiment development, flight and ground systems development, and integration to the carrier. Procedures for configuration control, fiscal control, and safety, reliabilty, and quality assurance were developed

Towards dense moving object segmentation based robust dense RGB-D SLAM in dynamic scenarios

© 2014 IEEE. Based on the latest achievements in computer vision and RGB-D SLAM, a practical way for dense moving object segmentation and thus a new framework for robust dense RGB-D SLAM in challenging dynamic scenarios is put forward. As the state-of-the-art method in RGB-D SLAM, dense SLAM is very robust when there are motion blur or featureless regions, while most of those sparse feature-based methods could not handle them. However, it is very susceptible to dynamic elements in the scenarios. To enhance its robustness in dynamic scenarios, we propose to combine dense moving object segmentation with dense SLAM. Since the object segmentation results from the latest available algorithm in computer vision are not satisfactory, we propose some effective measures to improve upon them so that better results can be achieved. After dense segmentation of dynamic objects, dense SLAM can be employed to estimate the camera poses. Quantitative results from the available challenging benchmark dataset have proved the effectiveness of our method