Lightweight High-Efficiency Power Train Propulsion with Axial- Flux Machines for Electric or Hybrid Vehicles

The aim of this chapter is to present a new type of powertrain with dimensions and low weight, for vehicles with reduced carbon emissions, which have an axial synchronous machine with one stator and two rotor, with static converter that is simple and inexpensive, a broadcast transmission system using an electric differential, with the control of the two rotors so that they can operate as motor/generator, at the same rotational direction or in opposite directions, at the same speed value, at slightly different speeds or at much different speeds by using an original dual vector control with operating on dual frequency. This is a major concern of hybrid and electric vehicle manufacturers. Expected results: a lighter power train with 20% and an increase in 5% of electric drive efficiency, low inertia rotor at high speed, a compact electric drive system with high torque and simple control, intelligent energy management system with a new vision of technological and innovation development, and equal importance of environment protection. The electrical machines for hybrid (HEV) or electric (EV) drives include a variety of different topologies. According to outcomes of literature survey, induction machines alongside synchronous machines take the major place in HEV or EV power trains

Electric Waterborne Public Transportation in Venice: a Case Study

The paper reports the results of a study for moving the present diesel-based watercraft propulsion technology used for public transportation in Venice city and lagoon to a more efficient and smart electric propulsion technology, in view of its adopted in a near future. Energy generation and storage systems, electrical machines and drives, as well as economic, environmental and social issues are presented and discussed. Some alternative solutions based on hybrid diesel engine and electric and full electric powertrains are compared in terms of weights, costs and payback times. Previews researches on ship propulsion and electric energy storage developed by the University of Padua and preliminary experiences on electric boats carried out in Venice lagoon by the municipal transportation company ACTV and other stakeholders are the starting point for this study. Results can be transferred to other waterborne mobility systems

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used

Next generation electric drives for HEV/EV propulsion systems: Technology, trends and challenges

In recent decades, several factors such as environmental protection, fossil fuel scarcity, climate change and pollution have driven the research and development of a more clean and sustainable transport. In this context, several agencies and associations, such as the European Union H2020, the United States Council for Automotive Research (USCAR) and the United Nations Economic and Social Commission for Asia (UN ESCAP) have defined a set of quantitative and qualitative goals in terms of efficiency, reliability, power losses, power density and economical costs to be met by next generation hybrid and full electric vehicle (HEV/EV) drive systems. As a consequence, the automotive electric drives (which consists of the electric machine, power converter and their cooling systems) of future vehicles have to overcome a number of technological challenges in order to comply with the aforementioned technical objectives. In this context, this paper presents, for each component of the electric drive, a comprehensive review of the state of the art, current technologies, future trends and enabling technologies that will make possible next generation HEV/EVs.This work has been partially supported by the Department of Education, Linguistic Policy and Culture of the Basque Government within the fund for research groups of the Basque university system IT978-16, by the Ministerio de Economía y Competitividad of Spain within the project DPI2014-53685-C2-2-R and FEDER funds and by the Government of the Basque Country within the research program ELKARTEK as the project KT4TRANS (KK-2015/00047 and KK-2016/00061), as well as by the program to support the specialization of Ph.D researchers at UPV/EHU ESPDOC16/25

Model-based powertrain design and control system development for the ideal all-wheel drive electric vehicle

The transfer case based all-wheel drive electric vehicle (TCAWDEV) and dual-axle AWDEV have been investigated to balance concerns about energy consumption, drivability and stability of vehicles. However, the mentioned powertrain architectures have the torque windup issue or the wheel skidding issue. The torque windup is an inherent issue of mechanical linked all-wheel drive systems. The hydraulic motor-based or the electric motor-based ideal all-wheel drive powertrain can provide feasible solutions to the mentioned issues. An ideal AWDEV (IAWDEV) powertrain architecture and its control schemes were proposed by this research; the architecture has four independent driving motors in powertrain. The IAWDEV gives more control freedoms to implement active torque controls and traction mode controls. In essence, this research came up with the distributed powertrain concept, and developed control schemes of the distributed powertrain to replace the transfer case and differential devices. The study investigated the dual-loop motor control, the hybrid sliding mode control (HSMC) and the neural network predictive control to reduce energy consumption and achieve better drivability and stability by optimizing the torque allocation of each dependent wheel. The mentioned control schemes were respectively developed for the anti-slip, differential and yaw stability functionalities of the IAWDEV powertrain. This study also investigated the sizing method that the battery capacity was estimated by using cruise performance at 3% road grade. In addition, the model-based verification was employed to evaluate the proposed powertrain design and control schemes. The verification shows that the design and controls can fulfill drivability requirements and minimize the existing issues, including torque windup and chattering of the slipping wheel. In addition, the verification shows that the IAWDEV can harvest around two times more energy while the vehicle is running on slippery roads than the TCAWDEV and the dual-axle AWDEV; the traction control can achieve better drivability and lower energy consumption than mentioned powertrains; the mode control can reduce 3% of battery charge depleting during the highway driving test. It also provides compelling evidences that the functionalities achieved by complicated and costly mechanical devices can be carried out by control schemes of the IAWDEV; the active torque controls can solve the inherent issues of mechanical linked powertrains; the sizing method is credible to estimate the operation envelop of powertrain components, even though there is some controllable over-sizing

New trends in electrical vehicle powertrains

The electric vehicle and plug-in hybrid electric vehicle play a fundamental role in the forthcoming new paradigms of mobility and energy models. The electrification of the transport sector would lead to advantages in terms of energy efficiency and reduction of greenhouse gas emissions, but would also be a great opportunity for the introduction of renewable sources in the electricity sector. The chapters in this book show a diversity of current and new developments in the electrification of the transport sector seen from the electric vehicle point of view: first, the related technologies with design, control and supervision, second, the powertrain electric motor efficiency and reliability and, third, the deployment issues regarding renewable sources integration and charging facilities. This is precisely the purpose of this book, that is, to contribute to the literature about current research and development activities related to new trends in electric vehicle power trains.Peer ReviewedPostprint (author's final draft

Design and Characteristic Investigation of Novel Dual Stator Pseudo-Pole Five-Phase Permanent Magnet Synchronous Generator for Wind Power Application

The main focus of this paper is to design and assess the characteristics investigation of Novel Dual Stator Pseudo-Pole Five Phase Permanent Magnet Synchronous Generator (NDSPPFP-PMSG) for wind power application. The proposed generator has a dual stator and two sets of five phase windings which enhance its power density and fault tolerant capability. The novelty of this generator is based on the fact that, eight magnetic poles are formed using only four poles of actual magnets on both the surfaces of the rotor. For the designing and optimal electromagnetic performance of the proposed generator, a Dynamic Magnetic Circuit Model (DMCM) is reported. To validate the results obtained from DMCM, Finite Element Method (FEM) has been opted owing to its high accuracy. For showing the performance superiority, the proposed generator is compared with two conventional generators namely, Dual Stator Embedded-Pole Five Phase (DSEPFP) and Single Stator Single Rotor Five Phase (SSSRFP) PMSG. To compare their performances, FEM results are considered. The electromagnetic performance namely, generated Electromotive Force(EMF), percentage(%) Total Harmonic Distortion(THD) of generated EMF, generated EMF vs speed, terminal voltage vs load current, electromagnetic torque developed on rotor vs time, %ripple content in the torque, and %efficiency vs load current are investigated for all the three generators. From these investigations, it is found that the power density (power to weight ratio) of the proposed generator is maximum.publishedVersio

Power Control of Diesel Engine-Generator Set Subject to Emission Constraints

Series Hybrid Electric Vehicle (SHEV) is a promising solution to reducing fuel consumption and emissions. It equipped with large battery packs that allow the SHEV first operates in full electrical mode, once the on-board batteries are depleted, the engine generator set turns on to sustain the power demand. Therefore, the efficiency and emissions of a SHEV depend heavily on the operation of the engine generator set. For the simultaneous power and emission control, the model based engine generator set control was developed. Then, emission estimation and Exhaust Gas Recirculation (EGR) model were implemented. The amount of EGR was determined based on the trade-off between NOx and soot emissions. Finally, Model Predictive Control (MPC) was designed and applied to control the power of the engine generator set at its operation point to achieve the best fuel economy as well as to satisfy the power demand