Placement driven retiming with a coupled edge timing model

Retiming is a widely investigated technique for performance optimization. It performs powerful modifications on a circuit netlist. However, often it is not clear, whether the predicted performance improvement will still be valid after placement has been performed. This paper presents a new retiming algorithm using a highly accurate timing model taking into account the effect of retiming on capacitive loads of single wires as well as fanout systems. We propose the integration of retiming into a timing-driven standard cell placement environment based on simulated annealing. Retiming is used as an optimization technique throughout the whole placement process. The experimental results show the benefit of the proposed approach. In comparison with the conventional design flow based on standard FEAS our approach achieved an improvement in cycle time of up to 34% and 17% on the average

Throughput-driven floorplanning with wire pipelining

The size of future high-performance SoC is such that the time-of-flight of wires connecting distant pins in the layout can be much higher than the clock period. In order to keep the frequency as high as possible, the wires may be pipelined. However, the insertion of flip-flops may alter the throughput of the system due to the presence of loops in the logic netlist. In this paper, we address the problem of floorplanning a large design where long interconnects are pipelined by inserting the throughput in the cost function of a tool based on simulated annealing. The results obtained on a series of benchmarks are then validated using a simple router that breaks long interconnects by suitably placing flip-flops along the wires

On-Chip Transparent Wire Pipelining (invited paper)

Wire pipelining has been proposed as a viable mean to break the discrepancy between decreasing gate delays and increasing wire delays in deep-submicron technologies. Far from being a straightforwardly applicable technique, this methodology requires a number of design modifications in order to insert it seamlessly in the current design flow. In this paper we briefly survey the methods presented by other researchers in the field and then we thoroughly analyze the solutions we recently proposed, ranging from system-level wire pipelining to physical design aspects

Back-annotation for interactive data path synthesis

In order to take into account physical design effects, a designer needs a feedback mechanism during interactive data path synthesis. In this paper, we propose a hypergraph model and a back-annotation algorithm which provide a feedback mechanism for back-annotation from physical designs to behavioral descriptions. Given a control data flow graph and its structural design, this back-annotation technique cannot only evaluate the design quality but can also feedback the delay to each edge and node in the graph. Therefore, a designer can identify the critical paths and improve the design. The hypergraph model and the back-annotation algorithm allow us to bridge the gap between the behavioral description and the physical design

Timing models for high-level synthesis

In this paper, we describe a timing model for clock estimation during high-level synthesis. In order to obtain realistic timing estimates, the proposed model considers all delay elements, including datapath, control and wire delays, and several technology factors, such as layout architecture, technology mapping, buffers insertion and loading effects. The experimental results show that this model can provide much better estimates than previous models. This model is well suited for automatic and interactive synthesis as well as feedback-driven synthesis where performance matrices must be rapidly and incrementally calculated

Retiming with wire delay and post-retiming register placement.

Tong Ka Yau Dennis.Thesis (M.Phil.)--Chinese University of Hong Kong, 2004.Includes bibliographical references (leaves 77-81).Abstracts in English and Chinese.Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Motivations --- p.1Chapter 1.2 --- Progress on the Problem --- p.2Chapter 1.3 --- Our Contributions --- p.3Chapter 1.4 --- Thesis Organization --- p.4Chapter 2 --- Background on Retiming --- p.5Chapter 2.1 --- Introduction --- p.5Chapter 2.2 --- Preliminaries --- p.7Chapter 2.3 --- Retiming Problem --- p.9Chapter 3 --- Literature Review on Retiming --- p.10Chapter 3.1 --- Introduction --- p.10Chapter 3.2 --- The First Retiming Paper --- p.11Chapter 3.2.1 --- """Retiming Synchronous Circuitry""" --- p.11Chapter 3.3 --- Important Extensions of the Basic Retiming Algorithm --- p.14Chapter 3.3.1 --- """A Fresh Look at Retiming via Clock Skew Optimization""" --- p.14Chapter 3.3.2 --- """An Improved Algorithm for Minimum-Area Retiming""" --- p.16Chapter 3.3.3 --- """Efficient Implementation of Retiming""" --- p.17Chapter 3.4 --- Retiming in Physical Design Stages --- p.19Chapter 3.4.1 --- """Physical Planning with Retiming""" --- p.19Chapter 3.4.2 --- """Simultaneous Circuit Partitioning/Clustering with Re- timing for Performance Optimization" --- p.20Chapter 3.4.3 --- """Performance Driven Multi-level and Multiway Parti- tioning with Retiming" --- p.22Chapter 3.5 --- Retiming with More Sophisticated Timing Models --- p.23Chapter 3.5.1 --- """Retiming with Non-zero Clock Skew, Variable Register, and Interconnect Delay""" --- p.23Chapter 3.5.2 --- """Placement Driven Retiming with a Coupled Edge Tim- ing Model""" --- p.24Chapter 3.6 --- Post-Retiming Register Placement --- p.26Chapter 3.6.1 --- """Layout Driven Retiming Using the Coupled Edge Tim- ing Model""" --- p.26Chapter 3.6.2 --- """Integrating Logic Retiming and Register Placement""" --- p.27Chapter 4 --- Retiming with Gate and Wire Delay [2] --- p.29Chapter 4.1 --- Introduction --- p.29Chapter 4.2 --- Problem Formulation --- p.30Chapter 4.3 --- Optimal Approach [2] --- p.31Chapter 4.3.1 --- Original Mathematical Framework for Retiming --- p.31Chapter 4.3.2 --- A Modified Optimal Approach --- p.33Chapter 4.4 --- Near-Optimal Fast Approach [2] --- p.37Chapter 4.4.1 --- Considering Wire Delay Only --- p.38Chapter 4.4.2 --- Considering Both Gate and Wire Delay --- p.42Chapter 4.4.3 --- Computational Complexity --- p.43Chapter 4.4.4 --- Experimental Results --- p.44Chapter 4.5 --- Lin's Optimal Approach [23] --- p.47Chapter 4.5.1 --- Theoretical Results --- p.47Chapter 4.5.2 --- Algorithm Description --- p.51Chapter 4.5.3 --- Computational Complexity --- p.52Chapter 4.5.4 --- Experimental Results --- p.52Chapter 4.6 --- Summary --- p.54Chapter 5 --- Register Insertion in Placement [36] --- p.55Chapter 5.1 --- Introduction --- p.55Chapter 5.2 --- Problem Formulation --- p.57Chapter 5.3 --- Placement of Registers After Retiming --- p.60Chapter 5.3.1 --- Topology Finding --- p.60Chapter 5.3.2 --- Register Placement --- p.69Chapter 5.4 --- Experimental Results --- p.71Chapter 5.5 --- Summary --- p.74Chapter 6 --- Conclusion --- p.75Bibliography --- p.7

SLAM : an automated structure to layout synthesis system

SLAM is a structure to layout synthesis system. It incorporates parameterisable bit-sliced and glue-logic generators to produce high density layout. In this paper, we describe a sliced layout architecture and SLAM system. In addition, we present partitioning algorithms for generating the floorplan for such an architecture. The algorithms partition the netlist into component sets best suited for different layout styles such as bit-sliced or strip-oriented logic. Each group is partitioned further into clusters to achieve better area utilization. Several experiments demonstrate that highly dense layouts can be achieved by using these algorithms with the sliced layout architecture

Advanced Timing and Synchronization Methodologies for Digital VLSI Integrated Circuits

This dissertation addresses timing and synchronization methodologies that are critical to the design, analysis and optimization of high-performance, integrated digital VLSI systems. As process sizes shrink and design complexities increase, achieving timing closure for digital VLSI circuits becomes a significant bottleneck in the integrated circuit design flow. Circuit designers are motivated to investigate and employ alternative methods to satisfy the timing and physical design performance targets. Such novel methods for the timing and synchronization of complex circuitry are developed in this dissertation and analyzed for performance and applicability.Mainstream integrated circuit design flow is normally tuned for zero clock skew, edge-triggered circuit design. Non-zero clock skew or multi-phase clock synchronization is seldom used because the lack of design automation tools increases the length and cost of the design cycle. For similar reasons, level-sensitive registers have not become an industry standard despite their superior size, speed and power consumption characteristics compared to conventional edge-triggered flip-flops.In this dissertation, novel design and analysis techniques that fully automate the design and analysis of non-zero clock skew circuits are presented. Clock skew scheduling of both edge-triggered and level-sensitive circuits are investigated in order to exploit maximum circuit performances. The effects of multi-phase clocking on non-zero clock skew, level-sensitive circuits are investigated leading to advanced synchronization methodologies. Improvements in the scalability of the computational timing analysis process with clock skew scheduling are explored through partitioning and parallelization.The integration of the proposed design and analysis methods to the physical design flow of integrated circuits synchronized with a next-generation clocking technology-resonant rotary clocking technology-is also presented. Based on the design and analysis methods presented in this dissertation, a computer-aided design tool for the design of rotary clock synchronized integrated circuits is developed