Performance analysis of a hardware accelerator of dependence management for taskbased dataflow programming models

Along with the popularity of multicore and manycore, task-based dataflow programming models obtain great attention for being able to extract high parallelism from applications without exposing the complexity to programmers. One of these pioneers is the OpenMP Superscalar (OmpSs). By implementing dynamic task dependence analysis, dataflow scheduling and out-of-order execution in runtime, OmpSs achieves high performance using coarse and medium granularity tasks. In theory, for the same application, the more parallel tasks can be exposed, the higher possible speedup can be achieved. Yet this factor is limited by task granularity, up to a point where the runtime overhead outweighs the performance increase and slows down the application. To overcome this handicap, Picos was proposed to support task-based dataflow programming models like OmpSs as a fast hardware accelerator for fine-grained task and dependence management, and a simulator was developed to perform design space exploration. This paper presents the very first functional hardware prototype inspired by Picos. An embedded system based on a Zynq 7000 All-Programmable SoC is developed to study its capabilities and possible bottlenecks. Initial scalability and hardware consumption studies of different Picos designs are performed to find the one with the highest performance and lowest hardware cost. A further thorough performance study is employed on both the prototype with the most balanced configuration and the OmpSs software-only alternative. Results show that our OmpSs runtime hardware support significantly outperforms the software-only implementation currently available in the runtime system for finegrained tasks.This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272) and by the European Research Council RoMoL Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations.Peer ReviewedPostprint (published version

Control speculation for energy-efficient next-generation superscalar processors

Conventional front-end designs attempt to maximize the number of "in-flight" instructions in the pipeline. However, branch mispredictions cause the processor to fetch useless instructions that are eventually squashed, increasing front-end energy and issue queue utilization and, thus, wasting around 30 percent of the power dissipated by a processor. Furthermore, processor design trends lead to increasing clock frequencies by lengthening the pipeline, which puts more pressure on the branch prediction engine since branches take longer to be resolved. As next-generation high-performance processors become deeply pipelined, the amount of wasted energy due to misspeculated instructions will go up. The aim of this work is to reduce the energy consumption of misspeculated instructions. We propose selective throttling, which triggers different power-aware techniques (fetch throttling, decode throttling, or disabling the selection logic) depending on the branch prediction confidence level. Results show that combining fetch-bandwidth reduction along with select-logic disabling provides the best performance in terms of overall energy reduction and energy-delay product improvement (14 percent and 10 percent, respectively, for a processor with a 22-stage pipeline and 16 percent and 13 percent, respectively, for a processor with a 42-stage pipeline).Peer ReviewedPostprint (published version

High performance extendable instruction set computing

In this paper, a new architecture called the extendable instruction set computer (EISC) is introduced that addresses the issues of memory size and performance in embedded microprocessor systems. The architecture exhibits an efficient fixed length 16-bit instruction set with short length offset and immediate operands. The offset and immediate operands can be extended to 32 bits via the operation of an extension flag. The code density of the EISC instruction set and its memory transfer erformance is shown to be significantly higher than current architectures making it a suitable candidate for the next generation of embedded computer systems. The compact EISC instruction set introduces data dependencies that seemingly limit deep pipeline and superscalar implementations. This paper suggests a mechanism by which these dependencies might be removed in hardware

Mechanistic analytical modeling of superscalar in-order processor performance

Superscalar in-order processors form an interesting alternative to out-of-order processors because of their energy efficiency and lower design complexity. However, despite the reduced design complexity, it is nontrivial to get performance estimates or insight in the application--microarchitecture interaction without running slow, detailed cycle-level simulations, because performance highly depends on the order of instructions within the application’s dynamic instruction stream, as in-order processors stall on interinstruction dependences and functional unit contention. To limit the number of detailed cycle-level simulations needed during design space exploration, we propose a mechanistic analytical performance model that is built from understanding the internal mechanisms of the processor. The mechanistic performance model for superscalar in-order processors is shown to be accurate with an average performance prediction error of 3.2% compared to detailed cycle-accurate simulation using gem5. We also validate the model against hardware, using the ARM Cortex-A8 processor and show that it is accurate within 10% on average. We further demonstrate the usefulness of the model through three case studies: (1) design space exploration, identifying the optimum number of functional units for achieving a given performance target; (2) program--machine interactions, providing insight into microarchitecture bottlenecks; and (3) compiler--architecture interactions, visualizing the impact of compiler optimizations on performance

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Evolutionary system for prediction and optimization of hardware architecture performance

The design of computer architectures is a very complex problem. The multiple parameters make the number of possible combinations extremely high. Many researchers have used simulation, although it is a slow solution since evaluating a single point of the search space can take hours. In this work we propose using evolutionary multilayer perceptron (MLP) to compute the performance of an architecture parameter settings. Instead of exploring the search space, simulating many configurations, our method randomly selects some architecture configurations; those are simulated to obtain their performance, and then an artificial neural network is trained to predict the remaining configurations performance. Results obtained show a high accuracy of the estimations using a simple method to select the configurations we have to simulate to optimize the MLP. In order to explore the search space, we have designed a genetic algorithm that uses the MLP as fitness function to find the niche where the best architecture configurations (those with higher performance) are located. Our models need only a small fraction of the design space, obtaining small errors and reducing required simulation by two orders of magnitude.Peer ReviewedPostprint (published version