Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

OPTIMIZATION OF FPGA-BASED PROCESSOR ARCHITECTURE FOR SOBEL EDGE DETECTION OPERATOR

This dissertation introduces an optimized processor architecture for Sobel edge detection operator on field programmable gate arrays (FPGAs). The processor is optimized by the use of several optimization techniques that aim to increase the processor throughput and reduce the processor logic utilization and memory usage. FPGAs offer high levels of parallelism which is exploited by the processor to implement the parallel process of edge detection in order to increase the processor throughput and reduce the logic utilization. To achieve this, the proposed processor consists of several Sobel instances that are able to produce multiple output pixels in parallel. This parallelism enables data reuse within the processor block. Moreover, the processor gains performance with a factor equal to the number of instances contained in the processor block. The processor that consists of one row of Sobel instances exploits data reuse within one image line in the calculations of the horizontal gradient. Data reuse within one and multiple image lines is enabled by using a processor with multiple rows of Sobel instances which allow the reuse of both the horizontal and vertical gradients. By the application of the optimization techniques, the proposed Sobel processor is able to meet real-time performance constraints due to its high throughput even with a considerably low clock frequency. In addition, logic utilization of the processor is low compared to other Sobel processors when implemented on ALTERA Cyclone II DE2-70

Analysis and Modeling of Advanced PIM Architecture Design Tradeoffs

A major trend in high performance computer architecture over the last two decades is the migration of memory in the form of high speed caches onto the microprocessor semiconductor die. Where temporal locality in the computation is high, caches prove very effective at hiding memory access latency and contention for communication resources. However where temporal locality is absent, caches may exhibit low hit rates resulting in poor operational efficiency. Vector computing exploiting pipelined arithmetic units and memory access address this challenge for certain forms of data access patterns, for example involving long contiguous data sets exhibiting high spatial locality. But for many advanced applications for science, technology, and national security at least some data access patterns are not consistent to the restricted forms well handled by either caches or vector processing. An important alternative is the reverse strategy; that of migrating logic in to the main memory (DRAM) and performing those operations directly on the data stored there. Processor in Memory (PIM) architecture has advanced to the point where it may fill this role and provide an important new mechanism for improving performance and efficiency of future supercomputers for a broad range of applications. One important project considering both the role of PIM in supercomputer architecture and the design of such PIM components is the Cray Cascade Project sponsored by the DARPA High Productivity Computing Program. Cascade is a Petaflops scale computer targeted for deployment at the end of the decade that merges the raw speed of an advanced custom vector architecture with the high memory bandwidth processing delivered by an innovative class of PIM architecture. The work represented here was performed under the Cascade project to explore critical design space issues that will determine the value of PIM in supercomputers and contribute to the optimization of its design. But this work also has strong relevance to hybrid systems comprising a combination of conventional microprocessors and advanced PIM based intelligent main memory

RICH: implementing reductions in the cache hierarchy

Reductions constitute a frequent algorithmic pattern in high-performance and scientific computing. Sophisticated techniques are needed to ensure their correct and scalable concurrent execution on modern processors. Reductions on large arrays represent the most demanding case where traditional approaches are not always applicable due to low performance scalability. To address these challenges, we propose RICH, a runtime-assisted solution that relies on architectural and parallel programming model extensions. RICH updates the reduction variable directly in the cache hierarchy with the help of added in-cache functional units. Our programming model extensions fit with the most relevant parallel programming solutions for shared memory environments like OpenMP. RICH does not modify the ISA, which allows the use of algorithms with reductions from pre-compiled external libraries. Experiments show that our solution achieves the performance improvements of 11.2% on average, compared to the state-of-the-art hardware-based approaches, while it introduces 2.4% area and 3.8% power overhead.This work has been supported by the RoMoL ERC Advanced Grant (GA 321253), by the European HiPEAC Network of Excellence, by the Spanish Ministry of Economy and Competitiveness (contract TIN2015-65316-P), and by Generalitat de Catalunya (contracts 2017- SGR-1414 and 2017-SGR-1328). V. Dimić has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Ajuts per a la contractació de personal investigador novell fellowship number 2017 FI_B 00855. M. Moretó has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship number RYC-2016-21104. M. Casas has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship number RYC-2017-23269. This manuscript has been co-authored by National Technology & Engineering Solutions of Sandia, LLC. under Contract No. DENA0003525 with the U.S. Department of Energy/National Nuclear Security AdministrationPeer ReviewedPostprint (author's final draft

BrainFrame: A node-level heterogeneous accelerator platform for neuron simulations

Objective: The advent of High-Performance Computing (HPC) in recent years has led to its increasing use in brain study through computational models. The scale and complexity of such models are constantly increasing, leading to challenging computational requirements. Even though modern HPC platforms can often deal with such challenges, the vast diversity of the modeling field does not permit for a single acceleration (or homogeneous) platform to effectively address the complete array of modeling requirements. Approach: In this paper we propose and build BrainFrame, a heterogeneous acceleration platform, incorporating three distinct acceleration technologies, a Dataflow Engine, a Xeon Phi and a GP-GPU. The PyNN framework is also integrated into the platform. As a challenging proof of concept, we analyze the performance of BrainFrame on different instances of a state-of-the-art neuron model, modeling the Inferior- Olivary Nucleus using a biophysically-meaningful, extended Hodgkin-Huxley representation. The model instances take into account not only the neuronal- network dimensions but also different network-connectivity circumstances that can drastically change application workload characteristics. Main results: The synthetic approach of three HPC technologies demonstrated that BrainFrame is better able to cope with the modeling diversity encountered. Our performance analysis shows clearly that the model directly affect performance and all three technologies are required to cope with all the model use cases.Comment: 16 pages, 18 figures, 5 table

Vector support for multicore processors with major emphasis on configurable multiprocessors

It recently became increasingly difficult to build higher speed uniprocessor chips because of performance degradation and high power consumption. The quadratically increasing circuit complexity forbade the exploration of more instruction-level parallelism (JLP). To continue raising the performance, processor designers then focused on thread-level parallelism (TLP) to realize a new architecture design paradigm. Multicore processor design is the result of this trend. It has proven quite capable in performance increase and provides new opportunities in power management and system scalability. But current multicore processors do not provide powerful vector architecture support which could yield significant speedups for array operations while maintaining arealpower efficiency. This dissertation proposes and presents the realization of an FPGA-based prototype of a multicore architecture with a shared vector unit (MCwSV). FPGA stands for Filed-Programmable Gate Array. The idea is that rather than improving only scalar or TLP performance, some hardware budget could be used to realize a vector unit to greatly speedup applications abundant in data-level parallelism (DLP). To be realistic, limited by the parallelism in the application itself and by the compiler\u27s vectorizing abilities, most of the general-purpose programs can only be partially vectorized. Thus, for efficient resource usage, one vector unit should be shared by several scalar processors. This approach could also keep the overall budget within acceptable limits. We suggest that this type of vector-unit sharing be established in future multicore chips. The design, implementation and evaluation of an MCwSV system with two scalar processors and a shared vector unit are presented for FPGA prototyping. The MicroBlaze processor, which is a commercial IP (Intellectual Property) core from Xilinx, is used as the scalar processor; in the experiments the vector unit is connected to a pair of MicroBlaze processors through standard bus interfaces. The overall system is organized in a decoupled and multi-banked structure. This organization provides substantial system scalability and better vector performance. For a given area budget, benchmarks from several areas show that the MCwSV system can provide significant performance increase as compared to a multicore system without a vector unit. However, a MCwSV system with two MicroBlazes and a shared vector unit is not always an optimized system configuration for various applications with different percentages of vectorization. On the other hand, the MCwSV framework was designed for easy scalability to potentially incorporate various numbers of scalar/vector units and various function units. Also, the flexibility inherent to FPGAs can aid the task of matching target applications. These benefits can be taken into account to create optimized MCwSV systems for various applications. So the work eventually focused on building an architecture design framework incorporating performance and resource management for application-specific MCwSV (AS-MCwSV) systems. For embedded system design, resource usage, power consumption and execution latency are three metrics to be used in design tradeoffs. The product of these metrics is used here to choose the MCwSV system with the smallest value