Development of a multimodal port freight transportation model for estimating container throughput

Computer based simulation models have often been used to study the multimodal freight transportation system. But these studies have not been able to dynamically couple the various modes into one model; therefore, they are limited in their ability to inform on dynamic system level interactions. This research thesis is motivated by the need to dynamically couple the multimodal freight transportation system to operate at multiple spatial and temporal scales. It is part of a larger research program to develop a systems modeling framework applicable to freight transportation. This larger research program attempts to dynamically couple railroad, seaport, and highway freight transportation models. The focus of this thesis is the development of the coupled railroad and seaport models. A separate volume (Wall 2010) on the development of the highway model has been completed. The model railroad and seaport was developed using Arena® simulation software and it comprises of the Ports of Savannah, GA, Charleston, NC, Jacksonville, FL, their adjacent CSX rail terminal, and connecting CSX railroads in the southeastern U.S. However, only the simulation outputs for the Port of Savannah are discussed in this paper. It should be mentioned that the modeled port layout is only conceptual; therefore, any inferences drawn from the model's outputs do not represent actual port performance. The model was run for 26 continuous simulation days, generating 141 containership calls, 147 highway truck deliveries of containers, 900 trains, and a throughput of 28,738 containers at the Port of Savannah, GA. An analysis of each train's trajectory from origin to destination shows that trains spend between 24 - 67 percent of their travel time idle on the tracks waiting for permission to move. Train parking demand analysis on the adjacent shunting area at the multimodal terminal seems to indicate that there aren't enough containers coming from the port because the demand is due to only trains waiting to load. The simulation also shows that on average it takes containerships calling at the Port of Savannah about 3.2 days to find an available dock to berth and unload containers. The observed mean turnaround time for containerships was 4.5 days. This experiment also shows that container residence time within the port and adjacent multimodal rail terminal varies widely. Residence times within the port range from about 0.2 hours to 9 hours with a mean of 1 hour. The average residence time inside the rail terminal is about 20 minutes but observations varied from as little as 2 minutes to a high of 2.5 hours. In addition, about 85 percent of container residence time in the port is spent idle. This research thesis demonstrates that it is possible to dynamically couple the different sub-models of the multimodal freight transportation system. However, there are challenges that need to be addressed by future research. The principal challenge is the development of a more efficient train movement algorithm that can incorporate the actual Direct Traffic Control (DTC) and / or Automatic Block Signal (ABS) track segmentation. Such an algorithm would likely improve the capacity estimates of the railroad network. In addition, future research should seek to reduce the high computational cost imposed by a discrete process modeling methodology and the adoption of single container resolution level for terminal operations. A methodology combining both discrete and continuous process modeling as proposed in this study could lessen computational costs and lower computer system requirements at a cost of some of the feedback capabilities of the model This tradeoff must be carefully examined.M.S.Committee Chair: Rodgers, Michael; Committee Member: Guensler, Randall; Committee Member: Hunter, Michae

Modeling and Optimization of Resource Allocation in Supply Chain Management Problems

Resource allocation in supply chain management studies how to allocate the limited available resources economically/optimally to satisfy the demands. It is an important research area in operations research. This dissertation focuses on the modeling and optimization of three problems. The first part of the dissertation investigates an important and unique problem in a supply chain distribution network, namely minimum cost network flow with variable lower bounds (MCNF-VLB). This type of network can be used to optimize the utilization of distribution channels (i.e., resources) in a large supply network, in order to minimize the total cost while satisfying flow conservation, lower and upper bounds, and demand/supply constraints. The second part of the dissertation introduces a novel method adopted from multi-product inventory control to optimally allocate the cache space and the frequency (i.e., resources) for multi-stream data prefetching in computer science. The objective is to minimize the cache miss level (backorder level), while satisfying the cache space (inventory space) and the total prefetching frequency (total order frequency) constraints. Also, efforts have also been made to extend the model for a multi-level, multi-stream prefetching system. The third part of the dissertation studies the joint capacity (i.e., resources) and demand allocation problem in a service delivery network. The objective is to minimize the total cost while satisfying a required service reliability, which measures the probability of satisfying customer demand within a delivery time interval

Stochastic Optimization Models for Perishable Products

For many years, researchers have focused on developing optimization models to design and manage supply chains. These models have helped companies in different industries to minimize costs, maximize performance while balancing their social and environmental impacts. There is an increasing interest in developing models which optimize supply chain decisions of perishable products. This is mainly because many of the products we use today are perishable, managing their inventory is challenging due to their short shelf life, and out-dated products become waste. Therefore, these supply chain decisions impact profitability and sustainability of companies and the quality of the environment. Perishable products wastage is inevitable when demand is not known beforehand. A number of models in the literature use simulation and probabilistic models to capture supply chain uncertainties. However, when demand distribution cannot be described using standard distributions, probabilistic models are not effective. In this case, using stochastic optimization methods is preferred over obtaining approximate inventory management policies through simulation. This dissertation proposes models to help businesses and non-prot organizations make inventory replenishment, pricing and transportation decisions that improve the performance of their system. These models focus on perishable products which either deteriorate over time or have a fixed shelf life. The demand and/or supply for these products and/or, the remaining shelf life are stochastic. Stochastic optimization models, including a two-stage stochastic mixed integer linear program, a two-stage stochastic mixed integer non linear program, and a chance constraint program are proposed to capture uncertainties. The objective is to minimize the total replenishment costs which impact prots and service rate. These models are motivated by applications in the vaccine distribution supply chain, and other supply chains used to distribute perishable products. This dissertation also focuses on developing solution algorithms to solve the proposed optimization models. The computational complexity of these models motivated the development of extensions to standard models used to solve stochastic optimization problems. These algorithms use sample average approximation (SAA) to represent uncertainty. The algorithms proposed are extensions of the stochastic Benders decomposition algorithm, the L-shaped method (LS). These extensions use Gomory mixed integer cuts, mixed-integer rounding cuts, and piecewise linear relaxation of bilinear terms. These extensions lead to the development of linear approximations of the models developed. Computational results reveal that the solution approach presented here outperforms the standard LS method. Finally, this dissertation develops case studies using real-life data from the Demographic Health Surveys in Niger and Bangladesh to build predictive models to meet requirements for various childhood immunization vaccines. The results of this study provide support tools for policymakers to design vaccine distribution networks

NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications, volume 1

Papers and viewgraphs from the conference are presented. This conference served as a broad forum for the discussion of a number of important issues in the field of mass storage systems. Topics include magnetic disk and tape technologies, optical disks and tape, software storage and file management systems, and experiences with the use of a large, distributed storage system. The technical presentations describe, among other things, integrated mass storage systems that are expected to be available commercially. Also included is a series of presentations from Federal Government organizations and research institutions covering their mass storage requirements for the 1990's

Warehousing and Inventory Management in Dual Channel and Global Supply Chains

More firms are adopting the dual-channel supply chain business model where firms offer their products to customers using dual-channel sales (to offer the item to customers online and offline). The development periods of innovative products have been shortened, especially for high-tech companies, which leads to products with short life cycles. This means that companies need to put their new products on the market as soon as possible. The dual-channel supply chain is a perfect tool to increase the customer’s awareness of new products and to keep customers’ loyalty; firms can offer new products online to the customer faster compared to the traditional retail sales channel. The emergence of dual-channel firms was mainly driven by the expansion in internet use and the advances in information and manufacturing technologies. No existing research has examined inventory strategies, warehouse structure, operations, and capacity in a dual-channel context. Additionally, firms are in need to integrate their global suppliers base; where the lower parts costs compensate for the much higher procurement and cross-border costs; in their supply chain operations. The most common method used to integrate the global supplier base is the use of cross-dock, also known as Third Party Logistic (3PL). This study is motivated by real-world problem, no existing research has considered the optimization of cross-dock operations in terms of dock assignment, storage locations, inventory strategies, and lead time uncertainty in the context of a cross-docking system. In this dissertation, we first study the dual-channel warehouse in the dual-channel supply chain. One of the challenges in running the dual-channel warehouse is how to organize the warehouse and manage inventory to fulfill both online and offline (retailer) orders, where the orders from different channels have different features. A model for a dual-channel warehouse in a dual-channel supply chain is proposed, and a solution approach is developed in the case of deterministic and stochastic lead times. Ending up with numerical examples to highlight the model’s validity and its usefulness as a decision support tool. Second, we extend the first problem to include the global supplier and the cross-border time. The impact of global suppliers and the effect of the cross-border time on the dual-channel warehouse are studied. A cross-border dual-channel warehouse model in a dual-channel supply chain context is proposed. In addition to demand and lead time uncertainty, the cross-border time is included as stochastic parameter. Numerical results and managerial insights are also presented for this problem. Third, motivated by a real-world cross-dock problem, we perform a study at one of the big 3 automotive companies in the USA. The company faces the challenges of optimizing their operations and managing the items in the 3PL when introducing new products. Thus, we investigate a dock assignment problem that considers the dock capacity and storage space and a cross-dock layout. We propose an integrated model to combine the cross-dock assignment problem with cross-dock layout problem so that cross-dock operations can be coordinated effectively. In addition to lead time uncertainty, the cross-border time is included as stochastic parameter. Real case study and numerical results and managerial insights are also presented for this problem highlighting the cross-border effect. Solution methodologies, managerial insights, numerical analysis as well as conclusions and potential future study topics are also provided in this dissertation