Topology Design and Delay Control for Communication Networks in Smart Grid

Stability is a critical concern in the design and maintenance of power systems. Different approaches have been proposed for the analysis of power grid stability in various scenarios depending on small or large perturbations and the speed of the phenomenon of interest. In this work, we consider the power grid as a group of flocking birds, as synchronization is the key issue in both contexts. The framework of partial difference equation (PdE) is used to analyze the system stability, when designing the communication network of the power grid network for conveying measurements between different power stations. Both the cases where communication network delay is negligible and non-negligible are studied here. The communication network design problem is formulated as an optimization problem under the consideration of a stable power grid. Corresponding optimization algorithms are designed to solve the problem. To convey measurements of the power network, wireless sensor networks is adopted, for its non-invasive and easy deployment properties. Periodic sleep scheduling is adopted to effectively save energy for the wireless sensor networks. To provide a controllable end-to-end delay for the communication networks, a dynamic duty cycle control approach is designed, featuring a single-hop delay controller based on the well known feedback control theory. The delay control approach also features a queuing delay adaptation scheme that adapts the duty cycle of each node to unpredictable packet rates, as well as a novel energy balancing approach that extends the network lifetime by dynamically adjusting the delay requirement allocated to each hop

Optimal frequency control in microgrid system using fractional order PID controller using Krill Herd algorithm

This paper investigates the use of fractional order Proportional, Integral and Derivative (FOPID) controllers for the frequency and power regulation in a microgrid power system. The proposed microgrid system composes of renewable energy resources such as solar and wind generators, diesel engine generators as a secondary source to support the principle generators, and along with different energy storage devices like fuel cell, battery and flywheel. Due to the intermittent nature of integrated renewable energy like wind turbine and photovoltaic generators, which depend on the weather conditions and climate change this affects the microgrid stability by considered fluctuation in frequency and power deviations which can be improved using the selected controller. The fractional-order controller has five parameters in comparison with the classical PID controller, and that makes it more flexible and robust against the microgrid perturbation. The Fractional Order PID controller parameters are optimized using a new optimization technique called Krill Herd which selected as a suitable optimization method in comparison with other techniques like Particle Swarm Optimization. The results show better performance of this system using the fractional order PID controller-based Krill Herd algorithm by eliminates the fluctuations in frequency and power deviation in comparison with the classical PID controller. The obtained results are compared with the fractional order PID controller optimized using Particle Swarm Optimization. The proposed system is simulated under nominal conditions and using the disconnecting of storage devices like battery and Flywheel system in order to test the robustness of the proposed methods and the obtained results are compared.У статті досліджено використання регуляторів пропорційного, інтегрального та похідного дробового порядку (FOPID) для регулювання частоти та потужності в електромережі. Запропонована мікромережева система складається з поновлюваних джерел енергії, таких як сонячні та вітрогенератори, дизельних генераторів як вторинного джерела для підтримки основних генераторів, а також з різних пристроїв для накопичування енергії, таких як паливна батарея, акумулятор і маховик. Через переривчасту природу інтегрованої відновлювальної енергії, наприклад, вітрогенераторів та фотоелектричних генераторів, які залежать від погодних умов та зміни клімату, це впливає на стабільність мікромережі, враховуючи коливання частоти та відхилення потужності, які можна поліпшити за допомогою вибраного контролера. Контролер дробового порядку має п’ять параметрів порівняно з класичним PID-контролером, що робить його більш гнучким та надійним щодо збурень мікромережі. Параметри PID-контролера дробового порядку оптимізовані за допомогою нової методики оптимізації під назвою «зграя криля», яка обрана як підходящий метод оптимізації порівняно з іншими методами, такими як оптимізація методом рою частинок. Результати показують кращі показники роботи цієї системи за допомогою алгоритму «зграя криля», заснованого на PID-контролері дробового порядку, виключаючи коливання частоти та відхилення потужності порівняно з класичним PID-контролером. Отримані результати порівнюються з PID-контролером дробового порядку, оптимізованим за допомогою оптимізації методом рою частинок. Запропонована система моделюється в номінальному режимі роботи та використовує відключення накопичувальних пристроїв, таких як акумулятор та маховик, щоб перевірити надійність запропонованих методів та порівняти отримані результати

Cyber Switching Attacks on Smart Grids

As we live in smart grid revolution, the conventional power systems turn into a fast pace toward smart grids, this transition creates new and significant challenges on the electrical network security level; In addition to the important features of the smart grids, cyber security transpire to be a serious issue due to connecting all the loads, generation units, renewable resources, substations and switches via communication network. Cyber-physical attacks are classified as the major threatening of smart grids security, this attacks may lead to a many severe repercussions in the smart grid such as large blackout and destruction of infrastructures. Switching attack is one of the most serious cyber-physical attacks on smart grids because it is direct, fast, and effective in destabilizing the grids. We start the thesis by introducing a state-of-the-art on cyber attacks from the power layer point of view i.e. the cyber attacks that affect the smart grid stability and what are the power system based solutions have been done so far to prevent or reduce the cyber attacks severity .As we focus on cyber switching attack and the method of preventing it, firstly a study on the attack principles and effects is introduced, we construct the attack on a single machine connected to an infinite bus through a transmission line. The attack on the target generator implemented by modeling the system using swing equation on Matlab platform, then we verified the result by implementing the same attack on Simulink Platform. Finally we present a novel solution to mitigate such type of attacks by using Thyristor-Controlled Braking Resistor (TCBR).The suggested solution is able to recapture the machine stability directly after the attack

Paper plate machine

In recent years natural fibers appear to be the outstanding materials which come as the viable and abundant substitute for the expensive and nonrenewable synthetic fiber. Natural fibers like sugar cane, banana, , oil palm, kenaf and coir has been used as reinforcement in thermoplastic composite for applications in consumer goods, furniture, low cost housing and civil structures. Pineapple leaf fiber (PALF) is one of them that have also good potential as reinforcement in thermoplastic composite. It is the objective of the current research to characterize PALF and to investigate the effect of fiber treatment on the mechanical properties of PALF reinforced polypropylene (PP) composite. Figure 6.1 show the example of pineapple used

Sensing and connection systems for assisted and autonomous driving and unmanned vehicles

The special issue, “Sensors, Wireless Connectivity and Systems for Autonomous Vehicles and Smart Mobility” on MDPI Sensors presents 12 accepted papers, with authors from North America, Asia, Europe and Australia, related to the emerging trends in sensing and navigation systems (i.e., sensors plus related signal processing and understanding techniques in multi-agent and cooperating scenarios) for autonomous vehicles, including also unmanned aerial and underwater ones

Smart grids as distributed learning control

The topic of smart grids has received a lot of attention but from a scientific point of view it is a highly imprecise concept. This paper attempts to describe what could ultimately work as a control process to fulfill the aims usually stated for such grids without throwing away some important principles established by the pioneers in power system control. In modern terms, we need distributed (or multi-agent) learning control which is suggested to work with a certain consensus mechanism which appears to leave room for achieving cyber-physical security, robustness and performance goals. © 2012 IEEE.published_or_final_versio