1,415 research outputs found
A Cooperative Network Coding Strategy for the Interference Relay Channel.
In this paper, we study an interference relay network with a satellite as relay. We propose a cooperative strategy based on physical layer network coding and superposition modulation decoding for uni-directional communications among users. The performance of our solution in terms of throughput is evaluated through capacity analysis and simulations that include practical constraints such as the lack of synchronization in time and frequency.We obtain a significant throughput gain compared to the classical time sharing case
Cooperative network-coding system for wireless sensor networks
Describes a cooperative network coding system for wireless sensor networks. In this paper, we propose two practical power) and bandwidth)efficient systems based on amplify)and)forward (AF) and decode)and)forward (DF) schemes to address the problem of information exchange via a relay. The key idea is to channel encode each source’s message by using a high)performance non)binary turbo code based on Partial Unit Memory (PUM) codes to enhance the bit)error)rate performance, then reduce the energy consumption and increase spectrum efficiency by using network coding (NC) to combine individual nodes’ messages at the relay before forwarding to the destination. Two simple and low complexity physical layer NC schemes are proposed based on combinations of received source messages at the relay. We also present the theoretical limits and numerical analysis of the proposed schemes. Simulation results under Additive White Gaussian Noise, confirm that the proposed schemes achieve significant bandwidth savings and fewer transmissions over the benchmark systems which do not resort to NC. Theoretical limits for capacity and Signal to Noise Ratio behaviour for the proposed schemes are derived. The paper also proposes a cooperative strategy that is useful when insufficient combined messages are received at a node to recover the desired source messages, thus enabling the system to retrieve all packets with significantly fewer retransmission request messages
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
High Capacity CDMA and Collaborative Techniques
The thesis investigates new approaches to increase the user capacity and improve the error
performance of Code Division Multiple Access (CDMA) by employing adaptive interference cancellation
and collaborative spreading and space diversity techniques. Collaborative Coding Multiple
Access (CCMA) is also investigated as a separate technique and combined with CDMA. The
advantages and shortcomings of CDMA and CCMA are analysed and new techniques for both the
uplink and downlink are proposed and evaluated.
Multiple access interference (MAI) problem in the uplink of CDMA is investigated first. The
practical issues of multiuser detection (MUD) techniques are reviewed and a novel blind adaptive
approach to interference cancellation (IC) is proposed. It exploits the constant modulus (CM)
property of digital signals to blindly suppress interference during the despreading process and obtain
amplitude estimation with minimum mean squared error for use in cancellation stages. Two
new blind adaptive receiver designs employing successive and parallel interference cancellation
architectures using the CM algorithm (CMA) referred to as ‘CMA-SIC’ and ‘BA-PIC’, respectively,
are presented. These techniques have shown to offer near single user performance for large
number of users. It is shown to increase the user capacity by approximately two fold compared
with conventional IC receivers. The spectral efficiency analysis of the techniques based on output
signal-to interference-and-noise ratio (SINR) also shows significant gain in data rate. Furthermore,
an effective and low complexity blind adaptive subcarrier combining (BASC) technique using a
simple gradient descent based algorithm is proposed for Multicarrier-CDMA. It suppresses MAI
without any knowledge of channel amplitudes and allows large number of users compared with
equal gain and maximum ratio combining techniques normally used in practice.
New user collaborative schemes are proposed and analysed theoretically and by simulations
in different channel conditions to achieve spatial diversity for uplink of CCMA and CDMA. First,
a simple transmitter diversity and its equivalent user collaborative diversity techniques for CCMA
are designed and analysed. Next, a new user collaborative scheme with successive interference
cancellation for uplink of CDMA referred to as collaborative SIC (C-SIC) is investigated to reduce
MAI and achieve improved diversity. To further improve the performance of C-SIC under high
system loading conditions, Collaborative Blind Adaptive SIC (C-BASIC) scheme is proposed.
It is shown to minimize the residual MAI, leading to improved user capacity and a more robust
system. It is known that collaborative diversity schemes incur loss in throughput due to the need of
orthogonal time/frequency slots for relaying source’s data. To address this problem, finally a novel
near-unity-rate scheme also referred to as bandwidth efficient collaborative diversity (BECD) is proposed and evaluated for CDMA. Under this scheme, pairs of users share a single spreading sequence to exchange and forward their data employing a simple superposition or space-time
encoding methods. At the receiver collaborative joint detection is performed to separate each
paired users’ data. It is shown that the scheme can achieve full diversity gain at no extra bandwidth
as inter-user channel SNR becomes high.
A novel approach of ‘User Collaboration’ is introduced to increase the user capacity of CDMA
for both the downlink and uplink. First, collaborative group spreading technique for the downlink
of overloaded CDMA system is introduced. It allows the sharing of the same single spreading
sequence for more than one user belonging to the same group. This technique is referred to as
Collaborative Spreading CDMA downlink (CS-CDMA-DL). In this technique T-user collaborative
coding is used for each group to form a composite codeword signal of the users and then a
single orthogonal sequence is used for the group. At each user’s receiver, decoding of composite
codeword is carried out to extract the user’s own information while maintaining a high SINR performance.
To improve the bit error performance of CS-CDMA-DL in Rayleigh fading conditions,
Collaborative Space-time Spreading (C-STS) technique is proposed by combining the collaborative
coding multiple access and space-time coding principles. A new scheme for uplink of CDMA
using the ‘User Collaboration’ approach, referred to as CS-CDMA-UL is presented next. When
users’ channels are independent (uncorrelated), significantly higher user capacity can be achieved
by grouping multiple users to share the same spreading sequence and performing MUD on per
group basis followed by a low complexity ML decoding at the receiver. This approach has shown
to support much higher number of users than the available sequences while also maintaining the
low receiver complexity. For improved performance under highly correlated channel conditions,
T-user collaborative coding is also investigated within the CS-CDMA-UL system
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
On receiver design for low density signature OFDM (LDS-OFDM)
Low density signature orthogonal frequency division multiplexing (LDS-OFDM) is an uplink multi-carrier multiple access scheme that uses low density signatures (LDS) for spreading the symbols in the frequency domain. In this paper, we introduce an effective receiver for the LDS-OFDM scheme. We propose a framework to analyze and design this iterative receiver using extrinsic information transfer (EXIT) charts. Furthermore, a turbo multi-user detector/decoder (MUDD) is proposed for the LDS-OFDM receiver. We show how the turbo MUDD is tuned using EXIT charts analysis. By tuning the turbo-style processing, the turbo MUDD can approach the performance of optimum MUDD with a smaller number of inner iterations. Using the suggested design guidelines in this paper, we show that the proposed structure brings about 2.3 dB performance improvement at a bit error rate (BER) equal to 10-5 over conventional LDS-OFDM while keeping the complexity affordable. Simulations for different scenarios also show that the LDS-OFDM outperforms similar well-known multiple access techniques such as multi-carrier code division multiple access (MC-CDMA) and group-orthogonal MC-CDMA
- …