Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks

Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the usage of the 60 GHz unlicensed band for wireless local area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved to support bandwidth-intensive multimedia applications. Exhaustive search along with beamforming (BF) is usually used to overcome 60 GHz channel propagation loss and accomplish data transmissions in such mmw WLANs. Because of its short range transmission with a high susceptibility to path blocking, multiple number of mmw access points (APs) should be used to fully cover a typical target environment for future high capacity multi-Gbps WLANs. Therefore, coordination among mmw APs is highly needed to overcome packet collisions resulting from un-coordinated exhaustive search BF and to increase the total capacity of mmw WLANs. In this paper, we firstly give the current status of mmw WLANs with our developed WiGig AP prototype. Then, we highlight the great need for coordinated transmissions among mmw APs as a key enabler for future high capacity mmw WLANs. Two different types of coordinated mmw WLAN architecture are introduced. One is the distributed antenna type architecture to realize centralized coordination, while the other is an autonomous coordination with the assistance of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet) architectures are also introduced to efficiently extend the coordinated mmw WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper

Multi-Connectivity Management and Orchestration Architecture Integrated With 5g Multi Radio Access Technology Network

The significant growth in the number of devices and the tremendous boost in network/user traffic types and volume as well as the efficiency constraints of 4G innovations have encouraged industry efforts and also financial investments towards defining, developing, and releasing systems for the fifth generation. The 5G of mobile broadband wireless networks with multiple Radio Access Technologies (Multi-RATs) have actually been designed to satisfy the system and service requirements of the existing as well as the coming applications. The multi-RAT access network is considered the key enabling technology to satisfy these requirements based on low latency, high throughput. To utilize all available network resources efficiently, research activities have been proposed on multi-connectivity to connect, split, steer, switch, and orchestrate across multiple RATs. Recently, multi-connectivity management and orchestration architecture standardization has just started; therefore, further study and research is needed. This project proposed a multi-connectivity management and orchestration architecture integrated with 5G, Long-Term Evolution (LTE), and Wireless LANs (WLAN) technologies. The simulations experiments conducted to measure the Quality of Experience (QoE) by provisioning network resources efficiently, which are: data rate, latency, bit error rate. The results show that the 5G requirements have been achieved with latency and throughput around 1ms and 200 Mbps, respectively

IMPROVING EFFICIENCY OF CITIZENS BROADBAND RADIO SERVICE DUAL CONNECTIVITY AND CITIZENS BROADBAND RADIO SERVICE / WIRELESS LOCAL AREA NETWORK RADIO LEVEL INTEGRATION AND INTERWORKING

Techniques are described herein for using Citizens Broadband Radio Service Dual Connectivity (CBRS-DC) to improve per-user throughput and mobility robustness. With CBRS-DC, a CBRS User Equipment (UE) can exchange data via a Master CBRS Device (CBSD) and a Secondary CBSD simultaneously, but control plane packets for both these CBSDs are sent only via the Master CBSD. In CBRS networks, the Spectrum Access System (SAS) may change the channel bandwidth allocated to a CBSD. The SAS could even remove all the resources allocated to a Master CBSD, which can create problems with DC operation in CBRS networks, particularly for denser deployments. There are similar problems associated with using Long Term Evolution (LTE) – Wireless Local Area Network (WLAN) Aggregation (LWA), LTE and Wi-Fi® radio level integration with IP security tunnel (LWIP), and Radio Access Network (RAN) Controlled LTE-WLAN Interworking (RCLWI) with CBRS and Wi-Fi integration at the radio network level. Moreover, current mechanisms do not operate efficiently with CBRS or some of the newer wireless technologies such as Institute of Electrical and Electronics Engineers (IEEE) 802.11ax, Extreme High Throughput (EHT), etc. Described herein are solutions to improve the efficiency of these operations

Advanced Technologies Enabling Unlicensed Spectrum Utilization in Cellular Networks

As the rapid progress and pleasant experience of Internet-based services, there is an increasing demand for high data rate in wireless communications systems. Unlicensed spectrum utilization in Long Term Evolution (LTE) networks is a promising technique to meet the massive traffic demand. There are two effective methods to use unlicensed bands for delivering LTE traffic. One is offloading LTE traffic toWi-Fi. An alternative method is LTE-unlicensed (LTE-U), which aims to directly use LTE protocols and infrastructures over the unlicensed spectrum. It has also been pointed out that addressing the above two methods simultaneously could further improve the system performance. However, how to avoid severe performance degradation of the Wi-Fi network is a challenging issue of utilizing unlicensed spectrum in LTE networks. Specifically, first, the inter-system spectrum sharing, or, more specifically, the coexistence of LTE andWi-Fi in the same unlicensed spectrum is the major challenge of implementing LTE-U. Second, to use the LTE and Wi-Fi integration approach, mobile operators have to manage two disparate networks in licensed and unlicensed spectrum. Third, optimization for joint data offloading to Wi-Fi and LTE-U in multi- cell scenarios poses more challenges because inter-cell interference must be addressed. This thesis focuses on solving problems related to these challenges. First, the effect of bursty traffic in an LTE and Wi-Fi aggregation (LWA)-enabled network has been investigated. To enhance resource efficiency, the Wi-Fi access point (AP) is designed to operate in both the native mode and the LWA mode simultaneously. Specifically, the LWA-modeWi-Fi AP cooperates with the LTE base station (BS) to transmit bearers to the LWA user, which aggregates packets from both LTE and Wi-Fi. The native-mode Wi-Fi AP transmits Wi-Fi packets to those native Wi-Fi users that are not with LWA capability. This thesis proposes a priority-based Wi-Fi transmission scheme with congestion control and studied the throughput of the native Wi-Fi network, as well as the LWA user delay when the native Wi-Fi user is under heavy traffic conditions. The results provide fundamental insights in the throughput and delay behavior of the considered network. Second, the above work has been extended to larger topologies. A stochastic geometry model has been used to model and analyze the performance of an MPTCP Proxy-based LWA network with intra-tier and cross-tier dependence. Under the considered network model and the activation conditions of LWA-mode Wi-Fi, this thesis has obtained three approximations for the density of active LWA-mode Wi-Fi APs through different approaches. Tractable analysis is provided for the downlink (DL) performance evaluation of large-scale LWA networks. The impact of different parameters on the network performance have been analyzed, validating the significant gain of using LWA in terms of boosted data rate and improved spectrum reuse. Third, this thesis also takes a significant step of analyzing joint multi-cell LTE-U and Wi-Fi network, while taking into account different LTE-U and Wi-Fi inter-working schemes. In particular, two technologies enabling data offloading from LTE to Wi-Fi are considered, including LWA and Wi-Fi offloading in the context of the power gain-based user offloading scheme. The LTE cells in this work are subject to load-coupling due to inter-cell interference. New system frameworks for maximizing the demand scaling factor for all users in both Wi-Fi and multi-cell LTE networks have been proposed. The potential of networks is explored in achieving optimal capacity with arbitrary topologies, accounting for both resource limits and inter-cell interference. Theoretical analyses have been proposed for the proposed optimization problems, resulting in algorithms that achieve global optimality. Numerical results show the algorithms’ effectiveness and benefits of joint use of data offloading and the direct use of LTE over the unlicensed band. All the derived results in this thesis have been validated by Monte Carlo simulations in Matlab, and the conclusions observed from the results can provide guidelines for the future unlicensed spectrum utilization in LTE networks

Fixed-Mobile Convergence in the 5G era: From Hybrid Access to Converged Core

The availability of different paths to communicate to a user or device introduces several benefits, from boosting enduser performance to improving network utilization. Hybrid access is a first step in enabling convergence of mobile and fixed networks, however, despite traffic optimization, this approach is limited as fixed and mobile are still two separate core networks inter-connected through an aggregation point. On the road to 5G networks, the design trend is moving towards an aggregated network, where different access technologies share a common anchor point in the core. This enables further network optimization in addition to hybrid access, examples are userspecific policies for aggregation and improved traffic balancing across different accesses according to user, network, and service context. This paper aims to discuss the ongoing work around hybrid access and network convergence by Broadband Forum and 3GPP. We present some testbed results on hybrid access and analyze some primary performance indicators such as achievable data rates, link utilization for aggregated traffic and session setup latency. We finally discuss the future directions for network convergence to enable future scenarios with enhanced configuration capabilities for fixed and mobile convergence.Comment: to appear in IEEE Networ

Design and analysis of LTE-WLAN wireless router with QOS preservation

Future wireless networks are envisioned to embrace a higher level of heterogeneity whereby different wireless technologies such as Long Term Evolution UMTS (LTE), Wireless Local Area Network (WLAN), WCDMA/HSPA, WiMAX, etc, not only will coexist but will also cooperate more closely. This is motivated by the fact that several complementary characteristics exist between these technologies. For example, one technology can be used as access technology while the other can be used for backhaul. To interconnect two or more wireless technologies, the usage of routing device is inevitable. In order to preserve the Quality of Service (QoS) across these technologies which come with different QoS definitions, a more comprehensive approach is required to preserve QoS across two diverse wireless technologies i.e. Enhanced Distributed Coordination Function (EDCA) for WLAN and Uplink/Downlink packet scheduling for LTE. WLAN is reasonably priced, easy to deploy and has been enjoying a wide market acceptance especially in the indoor. The LTE is expected to be the dominant 4G cellular technology. However it will take some time before LTE can attain the same level of adoption as what WLAN has achieved especially in the consumer market. The main objective of this research project is to design an access router that enables the interworking between WLAN and LTE with QoS preservation. First, the performance of both WLAN and LTE radio interfaces are investigated independently in terms of the data rates, user/system throughput, effect of multiple access and spectral efficiency. Next, different approaches and schemes which facilitate QoS preservation between WLAN and LTE over the router are investigated and evaluated in terms of different performance metrics (voice Mean Opinion Score, video delay, video traffic received, video jitter, video packet loss rate). The design and analysis of the performance are carried out through simulation as the only feasible approach to accomplish this work. OPNET Modeler is used to model the LTE-WLAN router as well as to perform the analysis. The results of this research verify the feasibility of the proposed router architecture and the interworking paradigm. The elegance of the proposed router implementation is that it does not require massive change in the existing wireless systems, LTE and WLAN to preserve the QoS. The results of the performance analysis show that it is crucial to have a QoS preservation mechanism in the router IP layer at any potential congestion point in the wireless network, to ensure that delay-sensitive and loss-sensitive applications, such as real-time video and voice, pass through unimpeded, relative to the loss-tolerant and delay-tolerant data applications. The comparison of the designed IP QoS preservation scheme namely, Priority Queuing without Block Acknowledgement (PQ noBA) shows that it can support 50% more multimedia application across the router than the other scheme