42 research outputs found
Sparse Regression LDPC Codes
This article introduces a novel concatenated coding scheme called sparse
regression LDPC (SR-LDPC) codes. An SR-LDPC code consists of an outer
non-binary LDPC code and an inner sparse regression code (SPARC) whose
respective field size and section sizes are equal. For such codes, an efficient
decoding algorithm is proposed based on approximate message passing (AMP) that
dynamically shares soft information between inner and outer decoders. This
dynamic exchange of information is facilitated by a denoiser that runs belief
propagation (BP) on the factor graph of the outer LDPC code within each AMP
iteration. It is shown that this denoiser falls within the class of
non-separable pseudo-Lipschitz denoising functions and thus that state
evolution holds for the proposed AMP-BP algorithm. Leveraging the rich
structure of SR-LDPC codes, this article proposes an efficient low-dimensional
approximate state evolution recursion that can be used for efficient
hyperparameter tuning, thus paving the way for future work on optimal code
design. Finally, numerical simulations demonstrate that SR-LDPC codes
outperform contemporary codes over the AWGN channel for parameters of practical
interest. SR-LDPC codes are shown to be viable means to obtain shaping gains
over the AWGN channel.Comment: This work has been submitted to the IEEE for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessible. arXiv admin note: substantial text overlap with
arXiv:2301.0189
Low-Density Parity-Check Coded High-order Modulation Schemes
In this thesis, we investigate how to support reliable data transmissions at high speeds in future communication systems, such as 5G/6G, WiFi, satellite, and optical communications. One of the most fundamental problems in these communication systems is how to reliably transmit information with a limited number of resources, such as power and spectral.
To obtain high spectral efficiency, we use coded modulation (CM), such as bit-interleaved coded modulation (BICM) and delayed BICM (DBICM). To be specific, BICM is a pragmatic implementation of CM which has been largely adopted in both industry and academia. While BICM approaches CM capacity at high rates, the capacity gap between BICM and CM is still noticeable at lower code rates. To tackle this problem, DBICM, as a variation of BICM, introduces a delay module to create a dependency between multiple codewords, which enables us to exploit extrinsic information from the decoded delayed sub-blocks to improve the detection of the undelayed sub-blocks. Recent work shows that DBICM improves capacity over BICM. In addition, BICM and DBICM schemes protect each bit-channel differently, which is often referred to as the unequal error protection (UEP) property. Therefore, bit mapping designs are important for constructing pragmatic BICM and DBICM. To provide reliable communication, we have jointly designed bit mappings in DBICM and irregular low-density parity-check (LDPC) codes. For practical considerations, spatially coupled LDPC (SC-LDPC) codes have been considered as well. Specifically, we have investigated the joint design of the multi-chain SC-LDPC and the BICM bit mapper. In addition, the design of SC-LDPC codes with improved decoding threshold performance and reduced rate loss has been investigated in this thesis as well.
The main body of this thesis consists of three parts. In the first part, considering Gray-labeled square M-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. Furthermore, we jointly optimize degree distributions and channel assignments of LDPC codes using protograph-based extrinsic information transfer charts. In addition, we proposed a constrained progressive edge growth-like algorithm to jointly construct LDPC codes and bit mappings for DBICM, taking the capacity of each bit-channel into account. Simulation results demonstrate that the designed LDPC-coded DBICM systems significantly outperform LDPC-coded BICM systems. In the second part, we proposed a windowed decoding algorithm for DBICM, which uses the extrinsic information of both the decoded delayed and undelayed sub-blocks, to improve the detection for all sub-blocks. We show that the proposed windowed decoding significantly outperforms the original decoding, demonstrating the effectiveness of the proposed decoding algorithm. In the third part, we apply multi-chain SC-LDPC to BICM. We investigate various connections for multi-chain SC-LDPC codes and bit mapping designs and analyze the performance of the multi-chain SC-LDPC codes over the equivalent binary erasure channels via density evolution. Numerical results demonstrate the superiority of the proposed design over existing connected-chain ensembles and over single-chain ensembles with the existing bit mapping design
Partially Coupled Codes for TB-based Transmission
In this thesis, we mainly investigate the design of partially coupled codes for transport block (TB) based transmission protocol adopted in 4G/5G mobile network standards. In this protocol, an information sequence in a TB is segmented into multiple code blocks (CBs) and each CB is protected by a channel codeword independently. It is inefficient in terms of transmit power and spectrum efficiency because any erroneous CB in a TB leads to the retransmission of the whole TB. An important research problem related to this TB-based transmission is how to improve the TB error rate (TBER) performance so that the number of retransmissions reduces.
To tackle this challenge, we present a class of spatial coupling techniques called partial coupling in the TB encoding operation, which has two subclasses: partial information coupled (PIC) and partial parity coupling (PPC). To be specific, the coupling is performed such that a fraction of the information/parity sequence of one component code at the current CB is used as the input of the component encoder at the next CB, leading to improved TBER performance. One of the appealing features of partial coupling (both PIC and PPC) is that the coupling can be applied to any component codes without changing their encoding and decoding architectures, making them compatible with the TB-based transmission protocol.
The main body of this thesis consists of two parts. In the first part, we apply both PIC and PPC to turbo codes. We investigate various coupling designs and analysis the performance of the partially coupled turbo codes over the binary erasure channel via density evolution (DE). Both simulation results and DE analysis show that such a class of codes can approach channel capacity with a large blocklength. In the second part, we construct PIC-polar codes. We show that PIC can effectively improve the error performance of finite-length polar codes by utilizing the channel polarization phenomenon. The DE-based performance analysis is also conducted. For both turbo codes and polar codes, we have shown that the partially coupled codes have significant performance gain over their uncoupled counterpart, demonstrating the effectiveness of the partial coupling
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks