Identification and control of peristaltic pumps in hemodialysis machines

In hemodialysis machines peristaltic pumps are responsible for the transfer of fluids. The main characteristic of these pumps is that they can transport the solutions with significant error. That depends on the tube segment deviation caused through the production. Due to the fact that the medical fluid represents sometimes drugs and in the same time it is required to control the fluid balance of the patient, it is important to transfer these fluids as accurate as possible. The goal of the paper is to design a controller that satisfies the mentioned requirements. First, the system identification is realized by classical moving average method (ARX), followed by the design of two controllers: a classical PID one and a fuzzy controller. After comparing their simulation results, the most preferable one was implemented in practice. Real simulation results of the implemented controller end the paper

Comparison of Artificial Intelligence Control Strategies for a Peristaltically Pumped Low-Pressure Driven Membrane Process

Peristaltic pumping is used in membrane applications where high and sterile sealing is required. However, control is difficult due to the pulsating pump characteristics and the time-varying properties of the system. In this work, three artificial intelligence control strategies (artificial neural networks (ANN), fuzzy logic expert systems, and fuzzy-integrated local models) were used to regulate transmembrane pressure and crossflow velocity in a microfiltration system under high fouling conditions. A pilot plant was used to obtain the necessary data to identify the AI models and to test the controllers. Humic acid was employed as a foulant, and cleaning-in-place with NaOH was used to restore the membrane state. Several starting operating points were studied and setpoint changes were performed to study the plant dynamics under different control strategies. The results showed that the control approaches were able to control the membrane system, but significant differences in the dynamics were observed. The ANN control was able to achieve the specifications but showed poor dynamics. Expert control was fast but showed problems in different working areas. Local models required less data than ANN, achieving high accuracy and robustness. Therefore, the technique to be used will depend on the available information and the application dynamics requirements.This research received no external funding.Peer ReviewedPostprint (published version

Wi-Fi Enabled Healthcare

Focusing on its recent proliferation in hospital systems, Wi-Fi Enabled Healthcare explains how Wi-Fi is transforming clinical work flows and infusing new life into the types of mobile devices being implemented in hospitals. Drawing on first-hand experiences from one of the largest healthcare systems in the United States, it covers the key areas associated with wireless network design, security, and support. Reporting on cutting-edge developments and emerging standards in Wi-Fi technologies, the book explores security implications for each device type. It covers real-time location services and emerging trends in cloud-based wireless architecture. It also outlines several options and design consideration for employee wireless coverage, voice over wireless (including smart phones), mobile medical devices, and wireless guest services. This book presents authoritative insight into the challenges that exist in adding Wi-Fi within a healthcare setting. It explores several solutions in each space along with design considerations and pros and cons. It also supplies an in-depth look at voice over wireless, mobile medical devices, and wireless guest services. The authors provide readers with the technical knowhow required to ensure their systems provide the reliable, end-to-end communications necessary to surmount today’s challenges and capitalize on new opportunities. The shared experience and lessons learned provide essential guidance for large and small healthcare organizations in the United States and around the world. This book is an ideal reference for network design engineers and high-level hospital executives that are thinking about adding or improving upon Wi-Fi in their hospitals or hospital systems

On-premise containerized, light-weight software solutions for Biomedicine

Bioinformatics software systems are critical tools for analysing large-scale biological data, but their design and implementation can be challenging due to the need for reliability, scalability, and performance. This thesis investigates the impact of several software approaches on the design and implementation of bioinformatics software systems. These approaches include software patterns, microservices, distributed computing, containerisation and container orchestration. The research focuses on understanding how these techniques affect bioinformatics software systems’ reliability, scalability, performance, and efficiency. Furthermore, this research highlights the challenges and considerations involved in their implementation. This study also examines potential solutions for implementing container orchestration in bioinformatics research teams with limited resources and the challenges of using container orchestration. Additionally, the thesis considers microservices and distributed computing and how these can be optimised in the design and implementation process to enhance the productivity and performance of bioinformatics software systems. The research was conducted using a combination of software development, experimentation, and evaluation. The results show that implementing software patterns can significantly improve the code accessibility and structure of bioinformatics software systems. Specifically, microservices and containerisation also enhanced system reliability, scalability, and performance. Additionally, the study indicates that adopting advanced software engineering practices, such as model-driven design and container orchestration, can facilitate efficient and productive deployment and management of bioinformatics software systems, even for researchers with limited resources. Overall, we develop a software system integrating all our findings. Our proposed system demonstrated the ability to address challenges in bioinformatics. The thesis makes several key contributions in addressing the research questions surrounding the design, implementation, and optimisation of bioinformatics software systems using software patterns, microservices, containerisation, and advanced software engineering principles and practices. Our findings suggest that incorporating these technologies can significantly improve bioinformatics software systems’ reliability, scalability, performance, efficiency, and productivity.Bioinformatische Software-Systeme stellen bedeutende Werkzeuge für die Analyse umfangreicher biologischer Daten dar. Ihre Entwicklung und Implementierung kann jedoch aufgrund der erforderlichen Zuverlässigkeit, Skalierbarkeit und Leistungsfähigkeit eine Herausforderung darstellen. Das Ziel dieser Arbeit ist es, die Auswirkungen von Software-Mustern, Microservices, verteilten Systemen, Containerisierung und Container-Orchestrierung auf die Architektur und Implementierung von bioinformatischen Software-Systemen zu untersuchen. Die Forschung konzentriert sich darauf, zu verstehen, wie sich diese Techniken auf die Zuverlässigkeit, Skalierbarkeit, Leistungsfähigkeit und Effizienz von bioinformatischen Software-Systemen auswirken und welche Herausforderungen mit ihrer Konzeptualisierungen und Implementierung verbunden sind. Diese Arbeit untersucht auch potenzielle Lösungen zur Implementierung von Container-Orchestrierung in bioinformatischen Forschungsteams mit begrenzten Ressourcen und die Einschränkungen bei deren Verwendung in diesem Kontext. Des Weiteren werden die Schlüsselfaktoren, die den Erfolg von bioinformatischen Software-Systemen mit Containerisierung, Microservices und verteiltem Computing beeinflussen, untersucht und wie diese im Design- und Implementierungsprozess optimiert werden können, um die Produktivität und Leistung bioinformatischer Software-Systeme zu steigern. Die vorliegende Arbeit wurde mittels einer Kombination aus Software-Entwicklung, Experimenten und Evaluation durchgeführt. Die erzielten Ergebnisse zeigen, dass die Implementierung von Software-Mustern, die Zuverlässigkeit und Skalierbarkeit von bioinformatischen Software-Systemen erheblich verbessern kann. Der Einsatz von Microservices und Containerisierung trug ebenfalls zur Steigerung der Zuverlässigkeit, Skalierbarkeit und Leistungsfähigkeit des Systems bei. Darüber hinaus legt die Arbeit dar, dass die Anwendung von SoftwareEngineering-Praktiken, wie modellgesteuertem Design und Container-Orchestrierung, die effiziente und produktive Bereitstellung und Verwaltung von bioinformatischen Software-Systemen erleichtern kann. Zudem löst die Implementierung dieses SoftwareSystems, Herausforderungen für Forschungsgruppen mit begrenzten Ressourcen. Insgesamt hat das System gezeigt, dass es in der Lage ist, Herausforderungen im Bereich der Bioinformatik zu bewältigen und stellt somit ein wertvolles Werkzeug für Forscher in diesem Bereich dar. Die vorliegende Arbeit leistet mehrere wichtige Beiträge zur Beantwortung von Forschungsfragen im Zusammenhang mit dem Entwurf, der Implementierung und der Optimierung von Software-Systemen für die Bioinformatik unter Verwendung von Prinzipien und Praktiken der Softwaretechnik. Unsere Ergebnisse deuten darauf hin, dass die Einbindung dieser Technologien die Zuverlässigkeit, Skalierbarkeit, Leistungsfähigkeit, Effizienz und Produktivität bioinformatischer Software-Systeme erheblich verbessern kann

A Model-Based Approach to Comprehensive Risk Management for Medical Devices

The European medical technology industry consists of around 27,000 companies, more than 95% of them small and medium-sized enterprises (SMEs), with over 675,000 employees [MEDT17]. In the European Union (EU) alone, medical devices constituted by far the biggest part of the medical technology (MedTech) sector with a market of 95 billion euros in annual sales in 2015 [EURO15].The European medical technology industry consists of around 27,000 companies, more than 95% of them small and medium-sized enterprises (SMEs), with over 675,000 employees [MEDT17]. In the European Union (EU) alone, medical devices constituted by far the biggest part of the medical technology (MedTech) sector with a market of 95 billion euros in annual sales in 2015 [EURO15]

Faculty Publications and Creative Works 1998

One of the ways in which we recognize our faculty at the University of New Mexico is through Faculty Publications & Creative Works. An annual publication, it highlights our faculty\u27s scholarly and creative activities and achievements and serves as a compendium of UNM faculty efforts during the 1998 calendar year. Faculty Publications & Creative Works strives to illustrate the depth and breadth of research activities performed throughout our University\u27s laboratories, studios and classrooms. We believe that the communication of individual research is a significant method of sharing concepts and thoughts and ultimately inspiring the birth of new ideas. In support of this, UNM faculty during 1998 produced over 2,457 works, including 1,990 scholarly papers and articles, 69 books, 98 book chapters, 119 reviews, 165 creative works and 16 patents. We are proud of the accomplishments of our faculty which are in part reflected in this book, which illustrates the diversity of intellectual pursuits in support of research and education at the University of New Mexico. Nasir Ahmed, Ph.D. Interim Associate Provost for Research and Dean of Graduate Studie