High-performance lead-acid batteries enabled by Pb and PbO2 nanostructured electrodes: Effect of operating temperature

Lead-acid batteries are now widely used for energy storage, as result of an established and reliable technology. In the last decade, several studies have been carried out to improve the performance of this type of batteries, with the main objective to replace the conventional plates with innovative electrodes with improved stability, increased capacity and a larger active surface. Such studies ultimately aim to improve the kinetics of electrochemical conversion reactions at the electrode-solution interface and to guarantee a good electrical continuity during the repeated charge/discharge cycles. To achieve these objectives, our contribution focuses on the employment of nanostructured electrodes. In particular, we have obtained nanostructured electrodes in Pb and PbO2 through electrosynthesis in a template consisting of a nanoporous polycarbonate membrane. These electrodes are characterized by a wider active surface area, which allows for a better use of the active material, and for a consequent increased specific energy compared to traditional batteries. In this research, the performance of lead-acid batteries with nanostructured electrodes was studied at 10 C at temperatures of 25, −20 and 40 °C in order to evaluate the efficiency and the effect of temperature on electrode morphology. The batteries were assembled using both nanostructured electrodes and an AGM-type separator used in commercial batteries

Silicon Derived from Glass Bottles as Anode Materials for Lithium Ion Full Cell Batteries.

Every year many tons of waste glass end up in landfills without proper recycling, which aggravates the burden of waste disposal in landfill. The conversion from un-recycled glass to favorable materials is of great significance for sustainable strategies. Recently, silicon has been an exceptional anode material towards large-scale energy storage applications, due to its extraordinary lithiation capacity of 3579 mAh g-1 at ambient temperature. Compared with other quartz sources obtained from pre-leaching processes which apply toxic acids and high energy-consuming annealing, an interconnected silicon network is directly derived from glass bottles via magnesiothermic reduction. Carbon-coated glass derived-silicon (gSi@C) electrodes demonstrate excellent electrochemical performance with a capacity of ~1420 mAh g-1 at C/2 after 400 cycles. Full cells consisting of gSi@C anodes and LiCoO2 cathodes are assembled and achieve good initial cycling stability with high energy density

Nanostructured Lead Electrodes with Reduced Graphene Oxide for High-Performance Lead–Acid Batteries

Nanostructured Pb electrodes consisting of nanowire arrays were obtained by electrodeposition, to be used as negative electrodes for lead–acid batteries. Reduced graphene oxide was added to improve their performances. This was achieved via the electrochemical reduction of graphene oxide directly on the surface of nanowire arrays. The electrodes with and without reduced graphene oxide were tested in a 5 M sulfuric acid solution using a commercial pasted positive plate and an absorbed glass mat separator in a zero-gap configuration. The electrodes were tested in deep cycling conditions with a very low cut-off potential. Charge–discharge tests were performed at 5C. The electrode with reduced graphene oxide outperformed the electrode without reduced graphene oxide, as it was able to work with a very high utilization of active mass and efficiency. A specific capacity of 258 mAhg−1–very close to the theoretical one–was achieved, and the electrode lasted for more than 1000 cycles. On the other hand, the electrode without reduced graphene oxide achieved a capacity close to 230 mAhg−1, which corresponds to a 90% of utilization of active mass

Cu-catalyzed Si-NWS grown on “carbon paper” as anodes for Li-ion cells

The very high theoretical capacity of the silicon (4200mAh/g more than 10 times larger than graphite), environmental-friendly, abundant and low-cost, makes it a potential candidate to replace graphite in high energy density Li-ion batteries. As a drawback, silicon suffers from huge volume changes (300%) on alloying and dealloying with Li, leading a structural deformation that induces disruption. The use of nanostructured silicon materials has been shown to be an effective way to avoid this mechanical degradation of the active material. In this paper the synthesis of silicon nanowires, grown on a highly porous 3D-like carbon paper substrate by CVD using Cu as the catalyst, is presented. The use of carbon paper allows to achieve remarkable loadings of active material (2-5 mg/cm2) and, consequently, high capacity densities. The silicon electrode was investigated both morphologically and electrochemically. To improve the electrochemical performance various strategies have been carried out. It was observed that a very slow first cycle (C/40), which helps the formation of a stable solid electrolyte interphase on the silicon surface, improves the performance of the cells; nevertheless, their cycle life has been found not fully satisfactory. Morphological analysis of the Si-NWs electrodes before and after cycling showed the presence of a dense silicon layer below the nanowires which could reduce the electrical contact between the active material and the substrate

3D lithium ion batteries—from fundamentals to fabrication

3D microbatteries are proposed as a step change in the energy and power per footprint of surface mountable rechargeable batteries for microelectromechanical systems (MEMS) and other small electronic devices. Within a battery electrode, a 3D nanoarchitecture gives mesoporosity, increasing power by reducing the length of the diffusion path; in the separator region it can form the basis of a robust but porous solid, isolating the electrodes and immobilising an otherwise fluid electrolyte. 3D microarchitecture of the whole cell allows fabrication of interdigitated or interpenetrating networks that minimise the ionic path length between the electrodes in a thick cell. This article outlines the design principles for 3D microbatteries and estimates the geometrical and physical requirements of the materials. It then gives selected examples of recent progress in the techniques available for fabrication of 3D battery structures by successive deposition of electrodes, electrolytes and current collectors onto microstructured substrates by self-assembly methods

Energy-storage technologies and electricity generation

As the contribution of electricity generated from renewable sources (wind, wave, solar) grows, the inherent intermittency of supply from such generating technologies must be addressed by a step-change in energy storage. Furthermore, the continuously developing demands of contemporary applications require the design of versatile energy-storage/power-supply systems offering wide ranges of power density and energy density. As no single energy-storage technology has this capability, systems will comprise of combinations of technologies such as electrochemical supercapacitors, flow batteries, Lithium-ion batteries, superconducting magnetic energy storage (SMES) and kinetic energy storage. The evolution of the electrochemical supercapacitor is largely dependent on the development of optimised electrode materials (tailored to the chosen electrolyte) and electrolytes. Similarly, the development of Lithium-ion battery technology requires fundamental research in materials science aimed at delivering new electrodes and electrolytes; Lithium-ion technology has significant potential and a step-change is required in order to promote the technology from the portable electronics market into high-duty applications. Flow-battery development is largely concerned with safety and operability. However, opportunities exist to improve electrode technology yielding larger power densities. The main barriers to overcome in terms of the development of SMES technology are those related to high-temperature superconductors in terms of their granular, anisotropic nature. Materials development is essential for the successful evolution of flywheel technology. Given the appropriate research effort, the key scientific advances required in order to successfully develop energy-storage technologies generally represent realistic goals which may be achieved by 2050

Nanostructured Conductive Polymers for Advanced Energy Storage

Conductive polymers combine the attractive properties associated with conventional polymers and unique electronic properties of metals or semiconductors. Recently, nanostructured conductive polymers have aroused considerable research interest owing to their unique properties over their bulk counterparts, such as large surface areas and shortened pathways for charge/mass transport, which make them promising candidates for broad applications in energy conversion and storage, sensors, actuators, and biomedical devices. Numerous synthetic strategies have been developed to obtain various conductive polymer nanostructures, and high-performance devices based on these nanostructured conductive polymers have been realized. This Tutorial review describes the synthesis and characteristics of different conductive polymer nanostructures; presents the representative applications of nanostructured conductive polymers as active electrode materials for electrochemical capacitors and lithium-ion batteries and new perspectives of functional materials for next-generation high-energy batteries, meanwhile discusses the general design rules, advantages, and limitations of nanostructured conductive polymers in the energy storage field; and provides new insights into future directions.University of Texas at Austin3M Non-tenured Faculty awardWelch Foundation F-1861Materials Science and Engineerin

Nanostructured electrochemical devices for sensing, energy conversion and storage

Nanostructured materials are attracting growing interest for improving performance of devices and systems of large technological interest. In this work, the principal results about the use of nanostructured materials in the field of electrochemical energy storage, electrochemical water splitting, and electrochemical sensing are presented. Nanostructures were fabricated with two different techniques. One of these was the electrodeposition of the desired material inside the channels of a porous support acting as template. The other one was based on displacement reaction induced by galvanic contact between metals with different electrochemical nobility. In the present work, a commercial polycarbonate membrane was used as template. In the field of the electrochemical energy storage, the attention was focused on lead-acid battery, and it has been found that nanostructured morphology enhances the active mass utilization up to about 80%, with consequent increase of specific energy and cycling rates to unattainable values for the commercial battery. Nanostructured Ni-IrO2 composite electrodes showed valuable catalytic activity for water oxidation. By comparison with other Ni-based electrocatalyst, this electrode appears as the most promising anode for electrochemical water splitting in alkaline cells. Also in the field of sensing, the nanostructured materials fabricated by displacement reaction showed performance of high interest. Some new results about the use of copper nanowires for H2O22 sensing will be showed, evidencing better performance in comparison with copper thin film. In this work, we will show that nanostructured electrodes are very promising candidate to form different electrochemical setups that operate more efficiently comparing to device with flat electrode materials

Synthesis of nanostructured metal chalcogenides used for energy conversion and storage

Despite that now most of our energy is still originated from burning of fossil fuels which are non-renewable in short period and may cause serious pollution to the environment; it has become a common sense that human being is facing with more and more serious energy crisis as well as environmental problems including global warming and pollutions. To save our future, now the developing and utilization of green renewable energy, such as solar energy, waste heat recovery, fuel cells, and so on, has been one of the hottest topics all around the world\u27s scientists