4,732 research outputs found
Analysis of Ultra Wide Band (UWB) Technology for an Indoor Geolocation and Physiological Monitoring System
The goal of this research is to analyze the utility of UWB for indoor geolocation and to evaluate a prototype system, which will send information detailing a person’s position and physiological status to a command center. In a real world environment, geolocation and physiological status information needs to be sent to a command and control center that may be located several miles away from the operational environment. This research analyzes and characterizes the UWB signal in the various operational environments associated with indoor geolocation. Additionally, typical usage scenarios for the interaction between UWB and other devices are also tested and evaluated
A low-cost time-hopping impulse radio system for high data rate transmission
We present an efficient, low-cost implementation of time-hopping impulse
radio that fulfills the spectral mask mandated by the FCC and is suitable for
high-data-rate, short-range communications. Key features are: (i) all-baseband
implementation that obviates the need for passband components, (ii) symbol-rate
(not chip rate) sampling, A/D conversion, and digital signal processing, (iii)
fast acquisition due to novel search algorithms, (iv) spectral shaping that can
be adapted to accommodate different spectrum regulations and interference
environments. Computer simulations show that this system can provide 110Mbit/s
at 7-10m distance, as well as higher data rates at shorter distances under FCC
emissions limits. Due to the spreading concept of time-hopping impulse radio,
the system can sustain multiple simultaneous users, and can suppress narrowband
interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special
Issue on UWB - State of the Art
Fundamental Limits of Wideband Localization - Part II: Cooperative Networks
The availability of positional information is of great importance in many
commercial, governmental, and military applications. Localization is commonly
accomplished through the use of radio communication between mobile devices
(agents) and fixed infrastructure (anchors). However, precise determination of
agent positions is a challenging task, especially in harsh environments due to
radio blockage or limited anchor deployment. In these situations, cooperation
among agents can significantly improve localization accuracy and reduce
localization outage probabilities. A general framework of analyzing the
fundamental limits of wideband localization has been developed in Part I of the
paper. Here, we build on this framework and establish the fundamental limits of
wideband cooperative location-aware networks. Our analysis is based on the
waveforms received at the nodes, in conjunction with Fisher information
inequality. We provide a geometrical interpretation of equivalent Fisher
information for cooperative networks. This approach allows us to succinctly
derive fundamental performance limits and their scaling behaviors, and to treat
anchors and agents in a unified way from the perspective of localization
accuracy. Our results yield important insights into how and when cooperation is
beneficial.Comment: To appear in IEEE Transactions on Information Theor
Low-Complexity Sub-band Digital Predistortion for Spurious Emission Suppression in Noncontiguous Spectrum Access
Noncontiguous transmission schemes combined with high power-efficiency
requirements pose big challenges for radio transmitter and power amplifier (PA)
design and implementation. Due to the nonlinear nature of the PA, severe
unwanted emissions can occur, which can potentially interfere with neighboring
channel signals or even desensitize the own receiver in frequency division
duplexing (FDD) transceivers. In this article, to suppress such unwanted
emissions, a low-complexity sub-band DPD solution, specifically tailored for
spectrally noncontiguous transmission schemes in low-cost devices, is proposed.
The proposed technique aims at mitigating only the selected spurious
intermodulation distortion components at the PA output, hence allowing for
substantially reduced processing complexity compared to classical linearization
solutions. Furthermore, novel decorrelation based parameter learning solutions
are also proposed and formulated, which offer reduced computing complexity in
parameter estimation as well as the ability to track time-varying features
adaptively. Comprehensive simulation and RF measurement results are provided,
using a commercial LTE-Advanced mobile PA, to evaluate and validate the
effectiveness of the proposed solution in real world scenarios. The obtained
results demonstrate that highly efficient spurious component suppression can be
obtained using the proposed solutions
UWB Radio Wireless Communication System Design for Railway Tunnels
Railway is an economical and comfortable mode of transportation for long distances. Safety, reliability and good quality of service are the main concern of railway industries which are maintained by railway management and communication system. There are several existing management systems like CCCS, ATCS, PTC and many more. With increasing population, demand for railway services also increases. To full fill these demands railway infrastructure has been developing continuously. By implementing latest technologies for railway communication we can make railway transportation safer, efficient, and more accessible. Ultra wideband radio communication system is amongst those very latest and rapidly growing technologies. This research work focuses on the study of UWB radio based wireless communication system for railway tunnels, whose main task is to maintain an uninterrupted data transmission between train driver to wayside controller
A digital polar transmitter for multi-band OFDM Ultra-WideBand
Linear power amplifiers used to implement the Ultra-Wideband standard must be
backed off from optimum power efficiency to meet the standard specifications and
the power efficiency suffers. The problem of low efficiency can be mitigated by polar
modulation. Digital polar architectures have been employed on numerous wireless
standards like GSM, EDGE, and WLAN, where the fractional bandwidths achieved
are only about 1%, and the power levels achieved are often in the vicinity of 20 dBm.
Can the architecture be employed on wireless standards with low-power and high
fractional bandwidth requirements and yet achieve good power efficiency?
To answer these question, this thesis studies the application of a digital polar transmitter
architecture with parallel amplifier stages for UWB. The concept of the digital
transmitter is motivated and inspired by three factors. First, unrelenting advances
in the CMOS technology in deep-submicron process and the prevalence of low-cost
Digital Signal processing have resulted in the realization of higher level of integration
using digitally intensive approaches. Furthermore, the architecture is an evolution
of polar modulation, which is known for high power efficiency in other wireless applications.
Finally, the architecture is operated as a digital-to-analog converter which
circumvents the use of converters in conventional transmitters.
Modeling and simulation of the system architecture is performed on the Agilent Advanced
Design System Ptolemy simulation platform. First, by studying the envelope
signal, we found that envelope clipping results in a reduction in the peak-to-average
power ratio which in turn improves the error vector magnitude performance (figure
of merit for the study). In addition, we have demonstrated that a resolution of three
bits suffices for the digital polar transmitter when envelope clipping is performed.
Next, this thesis covers a theoretical derivation for the estimate of the error vector
magnitude based on the resolution, quantization and phase noise errors. An analysis
on the process variations - which result in gain and delay mismatches - for a
digital transmitter architecture with four bits ensues. The above studies allow RF
designers to estimate the number of bits required and the amount of distortion that
can be tolerated in the system.
Next, a study on the circuit implementation was conducted. A DPA that comprises
7 parallel RF amplifiers driven by a constant RF phase-modulated signal and 7
cascode transistors (individually connected in series with the bottom amplifiers)
digitally controlled by a 3-bit digitized envelope signal to reconstruct the UWB
signal at the output. Through the use of NFET models from the IBM 130-nm
technology, our simulation reveals that our DPA is able to achieve an EVM of -
22 dB. The DPA simulations have been performed at 3.432 GHz centre frequency
with a channel bandwidth of 528 MHz, which translates to a fractional bandwidth
of 15.4%. Drain efficiencies of 13.2/19.5/21.0% have been obtained while delivering
-1.9/2.5/5.5 dBm of output power and consuming 5/9/17 mW of power.
In addition, we performed a yield analysis on the digital polar amplifier, based
on unit-weighted and binary-weighted architecture, when gain variations are introduced
in all the individual stages. The dynamic element matching method is also
introduced for the unit-weighted digital polar transmitter. Monte Carlo simulations
reveal that when the gain of the amplifiers are allowed to vary at a mean of 1 with a
standard deviation of 0.2, the binary-weighted architecture obtained a yield of 79%,
while the yields of the unit-weighted architectures are in the neighbourhood of 95%.
Moreover, the dynamic element matching technique demonstrates an improvement
in the yield by approximately 3%.
Finally, a hardware implementation for this architecture based on software-defined
arbitrary waveform generators is studied. In this section, we demonstrate that the error vector magnitude results obtained with a four-stage binary-weighted digital polar
transmitter under ideal combining conditions fulfill the European Computer Manufacturers
Association requirements. The proposed experimental setup, believed to
be the first ever attempted, confirm the feasibility of a digital polar transmitter architecture
for Ultra-Wideband. In addition, we propose a number of power combining
techniques suitable for the hardware implementation. Spatial power combining, in
particular, shows a high potential for the digital polar transmitter architecture.
The above studies demonstrate the feasibility of the digital polar architecture with
good power efficiency for a wideband wireless standard with low-power and high
fractional bandwidth requirements
- …