37 research outputs found
Performance improvement and cost reduction techniques for radio over fiber communications
Advanced cost reduction and performance improvement techniques conceived for Radio Over Fiber (ROF) communications are considered. ROF techniques are expected to form the backbone of the future 5G generation of wireless networks. The achievable link performance and the associated deployement cost constitute the most salient metrics of a ROF architecture. In this paper, we commence by providing a rudimentary overview of the ROF architecture and then elaborate on ROF techniques designed for improving the attainable system performance. We conclude by describing the ROF techniques conceived for reducing the ROF system installation costs
Comparative analysis of long-haul system based on SSB modulation utilising dual parallel MachâZehnder modulators
In this paper, we have proposed a long-haul optical transmission system, based on a single sideband (SSB) modulation scheme. Analytical and simulation models have been developed, optimised and demonstrated for the proposed SSB system configurations. The SSB modulation scheme was proposed to overcome dispersion in the fibre. We have shown that the related link losses can be minimized by increasing the quality of the optical signal at the modulation. We have optimised the radio over fibre configuration scheme based on dual parallel dual drive MachâZehnder Modulator, thereby increasing transmission length of the fibre. With the proposed SSB, by suppressing some of the harmonics and cancelling one of the sidebands, we have halved the RF power fading and interference. The developed analytical (theoretical/mathematical) model agrees very well with the simulation results using two (both) different commercial simulation tools. The optical signal is boosted while minimizing the number of repeaters. We report a SSB configuration, compensation and amplification with individual spans of 150Â km, by extending the length of the link up to 3250Â km. The proposed system configuration exhibits high performance with less complexity and lower cost
Techniques for nonlinear distortion suppression in radio over fiber communication systems
Radio over fiber (RoF) is a promising technology that will indisputably compete as a viable solution for future wireless, cellular and broadband networks. RoF, when combined with dense wavelength division multiplexing (DWDM), such as SONET/SDH, it can become a complete flexible and cost effective solution to the global telecommunication network, where asynchronous and synchronous communications may be efficiently supported. Subcarrier modulation (SCM) is utilized to modulate a RF signal on light, which in turn will be transmitted by fiber. Unfortunately, the transmission in most cases may become corrupted by nonlinear distortion that is induced by the nonlinear response of the optical transmitter, optical receiver and chromatic dispersion of the single mode fiber (SMF). The nonlinear distortion degrades the receiver sensitivity, which leads to a poor bit error rate (BER) and spurious free dynamic range (SFDR). Ultimately, this will increase RoF system costs and render it impractical. The objective of this thesis is to develop linearization methods that reduce the nonlinear distortion, increase receiver sensitivity and increase SFDR. The designs should also address the entire RoF system by combating the optical power fading issue that will be discussed in Chapter 2 without significantly adding great expense and complexity to the RoF system. Four optical linearization methods are proposed and shown through extensive simulation and/or experimentation to outperform similar existing linearization systems described in literature. The proposed single wavelength balanced system is shown to improve the suppression of 2nd order distortion over the dual wavelength balanced system, thereby leading to greater improvement in receiver sensitivity and BER. Furthermore, the design also suppresses relative intensity noise (RIN). The proposed tunable fiber Bragg grating (FBG) balanced system is capable of suppressing both 2 nd and 3 rd order distortions despite which RF carrier that is used. Furthermore, it was shown to outperform the conventional RoF system in terms of receiver sensitivity and BER. The proposed asymmetric Mach-Zehnder modulator (MZM) has been shown to generate optical single sideband (OSSB) transmissions and outperform the dual-parallel modulator, by improving 3rd order intermodulation distortion (3IMD) suppression and increasing SFDR. The final proposed linearization method is the mixed-polarization MZM, where OSSB is also generated and outperforms the conventional OSSB RoF system in terms of 3IMD suppression and SFDR. Furthermore, close form expressions for SFDR are developed for the final two designs, which is crucial in study of their stability and performance
Millimetre-Wave Fibre-Wireless Technologies for 5G Mobile Fronthaul
The unprecedented growth in mobile data traffic, driven primarily by bandwidth rich applications and high definition video is accelerating the development of fifth generation (5G) mobile network. As mobile access network evolves towards centralisation, mobile fronthaul (MFH) architecture becomes essential in providing high capacity, ubiquitous and yet affordable services to subscribers. In order to meet the demand for high data rates in the access, Millimetre-wave (mmWave) has been highlighted as an essential technology in the development of 5G-new radio (5G-NR). In the present MFH architecture which is typically based on common public radio interface (CPRI) protocol, baseband signals are digitised before fibre transmission, featuring high overhead data and stringent synchronisation requirements. A direct application of mmWave 5G-NR to CPRI digital MFH, where signal bandwidth is expected to be up to 1GHz will be challenging, due to the increased complexity of the digitising interface and huge overhead data that will be required for such bandwidth. Alternatively, radio over fibre (RoF) technique can be employed in the transportation of mmWave wireless signals via the MFH link, thereby avoiding the expensive digitisation interface and excessive overhead associated with its implementation. Additionally, mmWave carrier can be realised with the aid of photonic components employed in the RoF link, further reducing the system complexity. However, noise and nonlinearities inherent to analog transmission presents implementation challenges, limiting the system dynamic range. Therefore, it is important to investigate the effects of these impairments in RoF based MFH architecture.
This thesis presents extensive research on the impact of noise and nonlinearities on 5G candidate waveforms, in mmWave 5G fibre wireless MFH. Besides orthogonal frequency division multiplexing (OFDM), another radio access technology (RAT) that has received significant attention is filter bank multicarrier (FBMC), particularly due to its high spectral containment and excellent performance in asynchronous transmission. Hence, FBMC waveform is adopted in this work to study the impact of noise and nonlinearities on the mmWave fibre-wireless MFH architecture. Since OFDM is widely deployed and it has been adopted for 5G-NR, the performance of OFDM and FBMC based 5G mmWave RAT in fibre wireless MFH architecture is compared for several implementations and transmission scenarios.
To this extent, an end to end transmission testbed is designed and implemented using industry standard VPI Transmission MakerÂź to investigate five mmWave upconversion techniques. Simulation results show that the impact of noise is higher in FBMC when the signal to-noise (SNR) is low, however, FBMC exhibits better performance compared to OFDM as the SNR improved. More importantly, an evaluation of the contribution of each noise component to the overall system SNR is carried out. It is observed in the investigation that noise contribution from the optical carriers employed in the heterodyne upconversion of intermediate frequency (IF) signals to mmWave frequency dominate the system noise. An adaptive modulation technique is employed to optimise the system throughput based on the received SNR. The throughput of FBMC based system reduced significantly compared to OFDM, due to laser phase noise and chromatic dispersion (CD). Additionally, it is shown that by employing frequency domain averaging technique to enhance the channel estimation (CE), the throughput of FBMC is significantly increased and consequently, a comparable performance is obtained for both waveforms.
Furthermore, several coexistence scenarios for multi service transmission are studied, considering OFDM and FBMC based RATs to evaluate the impact inter band interference (IBI), due to power amplifier (PA) nonlinearity on the system performance. The low out of band (OOB) emission in FBMC plays an important role in minimising IBI to adjacent services. Therefore, FBMC requires less guardband in coexistence with multiple services in 5G fibre-wireless MFH. Conversely, OFDM introduced significant OOB to adjacent services requiring large guardband in multi-service coexistence transmission scenario.
Finally, a novel transmission scheme is proposed and investigated to simultaneously generate multiple mmWave signals using laser heterodyning mmWave upconversion technique. With appropriate IF and optical frequency plan, several mmWave signals can be realised. Simulation results demonstrate successful simultaneous realisation of 28GHz, 38GHz, and 60GHz mmWave signals
Orthogonal frequency division multiplexing for optical access networks
Orthogonal Frequency Division Multiplexing (OFDM) is a modulation scheme with numerous advantages that has for years been employed as the leading physical interface in many wired and wireless communication systems. Recently, with advancements made in digital signal processing, there has been a surge of interest in applying OFDM techniques for optical communications. This thesis presents extensive research on optical OFDM and how it is being applied in access networks. With the aid of theoretical analysis, simulations and experiments, it is shown that the system performance of direct-detection optical OFDM (DD-OOFDM) in the presence of MZM non-linear distortion can be improved by proper biasing and selection of appropriate drive to the MZM. Investigations are conducted to illustrate how a variation in the number of subcarriers and the modulation format influences the sensitivity of the DD-OOFDM system to the MZM non-linear distortion. The possibility of improving the spectral efficiency by reduction of the width of the guard band is also investigated. This thesis also looks into the radio-over-fibre (RoF) transmission of Multiband OFDM UWB as a transparent and low-cost solution for distributing multi-Gbit/s data to end-users in FTTH networks. Due to relaxed regulatory requirements and the wide bandwidth available, UWB operation in the 60-GHz band is also considered for this FTTH application scenario. Four techniques for enabling MB-OFDM UWB RoF operation in the 60-GHz band are experimentally demonstrated. The impacts of various parameters on the performance of the techniques as well as the limitations imposed by fibre distribution are illustrated. Finally, a digital pre-distorter is proposed for compensating for the MZM non-linearity. Experimental demonstration of this digital pre-distortion in an UWB over fibre transmission system shows an increased tolerance to the amplitude of the driving OFDM signal as well as an increase in the optimum modulation index of the OFDM signal
Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques
The recent remarkable growth in bandwidth of both wired optical and wireless access
networks supports a burst of new high bandwidth Internet applications such as: peer-topeer
file sharing, cloud storage, on-line gaming, video streaming, etc. Within this
scenario, the convergence of fixed and wireless access networks offers significant
opportunities for network operators to satisfy user demands, and simultaneously reduce
the cost of implementing and running separated wireless and wired networks.
The integration of wired and wireless network can be accomplished within several
scenarios and at several levels. In this thesis we will focus on converged radio over fiber
architectures, particularly on two application scenarios: converged optical 60 GHz
wireless networks and wireless overlay backhauling over bidirectional colorless
wavelength division multiplexing passive optical networks (WDM-PONs).
In the first application scenario, optical 60 GHz signal generation using external
modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder
modulators (MZM) is considered. The performance of different optical modulation
techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies
are identified. The study is extended to 60 GHz carriers digitally modulated with data and
to systems employing subcarrier multiplexed (SCM) mm-wave channels.
In the second application scenario, the performance of WDM-PONs employing
reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal
frequency-division multiplexing (OFDM) wireless signal is assessed analytically and
experimentally, with the relevant system impairments being identified. It is demonstrated
that the intermodulation due to the beating of the baseband signal and wireless signal at
the receiver can seriously impair the wireless channel. Performance degradation of the
wireless channel caused by the RSOA gain modulation owing to the downstream
baseband data is also assessed, and system design guidelines are provided.Universidade do Algarve, Faculdade de CiĂȘncias e Tecnologi
Recommended from our members
Linearization techniques to suppress optical nonlinearity
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis is shown the implementation of the linearization techniques such as feedforward and pre-distortion feedback linearization to suppress the optical components nonlinearities caused by the fibre and semiconductor optical amplifier (SOA). The simulation verified these two linearization techniques for single tone direct modulation, two tone indirect modulation and ultra wideband input to the optical fibre. These techniques uses the amplified spontaneously emission (ASE) noise reduction in two loops of SOA by a feed-forward and predistortion linearizer and is shown more than 6dB improvement. Also it investigates linearization for the SOA amplifier to cancel out the third order harmonics or inter-modulation distortion (IMD) or four waves mixing. In this project, more than 20 dB reductions is seen in the spectral re-growth caused by the SOA. Amplifier non-linearity becomes more severe with two strong input channels leading to inter-channel distortion which can completely mask a third adjacent channel. The simulations detailed above were performed utilizing optimum settings for the variable gain, phase and delay components in the error correction loop of the feed forward and Predistortion systems and hence represent the ideal situation of a perfect feed-forward and Predistortion system. Therefore it should be consider that complexity of circuit will increase due to amplitude, phase and delay mismatches in practical design. Also it has describe the compatibility of Software Defined Radio with Hybrid Fibre Radio with simulation model of wired optical networks to be used for future research investigation, based on the star and ring topologies for different modulation schemes, and providing the performance for these configurations
Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques
The recent remarkable growth in bandwidth of both wired optical and wireless access
networks supports a burst of new high bandwidth Internet applications such as: peer-topeer
file sharing, cloud storage, on-line gaming, video streaming, etc. Within this
scenario, the convergence of fixed and wireless access networks offers significant
opportunities for network operators to satisfy user demands, and simultaneously reduce
the cost of implementing and running separated wireless and wired networks.
The integration of wired and wireless network can be accomplished within several
scenarios and at several levels. In this thesis we will focus on converged radio over fiber
architectures, particularly on two application scenarios: converged optical 60 GHz
wireless networks and wireless overlay backhauling over bidirectional colorless
wavelength division multiplexing passive optical networks (WDM-PONs).
In the first application scenario, optical 60 GHz signal generation using external
modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder
modulators (MZM) is considered. The performance of different optical modulation
techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies
are identified. The study is extended to 60 GHz carriers digitally modulated with data and
to systems employing subcarrier multiplexed (SCM) mm-wave channels.
In the second application scenario, the performance of WDM-PONs employing
reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal
frequency-division multiplexing (OFDM) wireless signal is assessed analytically and
experimentally, with the relevant system impairments being identified. It is demonstrated
that the intermodulation due to the beating of the baseband signal and wireless signal at
the receiver can seriously impair the wireless channel. Performance degradation of the
wireless channel caused by the RSOA gain modulation owing to the downstream
baseband data is also assessed, and system design guidelines are provided.Universidade do Algarve, Faculdade de CiĂȘncias e Tecnologi
Photonics Based Techniques for Millimeter-Wave Generation, Transmission, and Multiplexing
Millimeter-waves have found wide application in various fields. In this research, MMW generation, transmitting and receiving, multiplexing techniques are investigated. Three ways of MMW generation based on photonics are discussed. By modeling these three techniques and applying different situations of transmission links up to 100 km and fixed bit rate of 2.5 Gb/s, different results were found and compared to each other. Also, the effect of chromatic dispersion is discussed in addition to the phase conjugation way of dispersion compensation. Dispersion compensation based on phase conjugation was also simulated and applied to OSSB millimeter-wave generator in order to transmit the generated signals through 100 km of fiber and data rate of 10 Gb/s without dispersion effect