TDMAとDCFの組み合わせによるアドホックネットワーク上でのQoS通信の実現方式

　An ad hoc network does not rely on the fixed network infrastructure; it uses a distributed network management method. With the popularity of the smart devices, ad hoc network has received more and more attention, supporting QoS in ad hoc network has become inevitable. Many researches have been done for provision of QoS in ad hoc networks. These researches can be divided into three types.　The first type is contention-based approach which is the most widely used. IEEE 802.11e MAC (media access control) protocol belongs to this type which is an extension of IEEE 802.11 DCF(Distributed Coordination Function). It specifies a procedure to guarantee QoS by providing more transmission opportunities for high priority data. However, since IEEE 802.11eis designed based on the premise that access points are used, when the number of QoS flows increases, packet collisions could occur in multi-hop ad hoc network.　The second type is using TDMA-based approach. The TDMA approach can provide contention-free access for QoS traffics through the appropriate time slot reservation. The current TDMA approaches reserve time slots for both QoS traffics and best-effort traffics. However, it is difficult for TDMA as the only approach to allocating channel access time for best-effort traffics sincet he required bandwidth of the best-effort traffics changes frequently.　We propose a QoS scheme, which takes advantage of both contention-based approach and TDMA-based approach. In the proposed scheme, contention-based approach DCF provides easy and fair channel time for best-effort traffics, and TDMA approach serves the QoS traffics. A time frame structure is designed to manage the bandwidth allocation. A time frame is divided into two periods, specifically the TDMA periods and the DCF periods. The proportion of two periods is decided by QoS traffics. Therefore the QoS traffics are given absolutely higher priority than best-effort traffics. In order to guarantee the transmission of each QoS packet in TDMA period, a time slot assignment algorithm based on QoS data rate has been proposed. The proposed scheme also employs an admission control scheme, which rejects the new QoS user when the channel capacity is reached. In addition, we provide the configuration of the proposed scheme in the mobile environment. The procedures are designed for route changes and new-adding users. 　The proposed scheme is simulated in the QualNet simulator. In the static environment, the performance of the proposed scheme is evaluated in the case of a gradual increase in the number TCP flows and in the case of gradual increase in QoS data rate. Simulation results show that in the static environment the proposed scheme can not only provide effective QoS performance, but also can provide good support for best-effort flows. In the mobile environment, we simulated the performance of the proposed scheme at different moving speed (maximum is 5 Km/h) when the ARF (Auto Rate Fallback) is available. From the simulation results, in a specific mobile environment, the proposed scheme can support the QoS transmission well.電気通信大学201

A cross-layer middleware architecture for time and safety critical applications in MANETs

Mobile Ad hoc Networks (MANETs) can be deployed instantaneously and adaptively, making them highly suitable to military, medical and disaster-response scenarios. Using real-time applications for provision of instantaneous and dependable communications, media streaming, and device control in these scenarios is a growing research field. Realising timing requirements in packet delivery is essential to safety-critical real-time applications that are both delay- and loss-sensitive. Safety of these applications is compromised by packet loss, both on the network and by the applications themselves that will drop packets exceeding delay bounds. However, the provision of this required Quality of Service (QoS) must overcome issues relating to the lack of reliable existing infrastructure, conservation of safety-certified functionality. It must also overcome issues relating to the layer-2 dynamics with causal factors including hidden transmitters and fading channels. This thesis proposes that bounded maximum delay and safety-critical application support can be achieved by using cross-layer middleware. Such an approach benefits from the use of established protocols without requiring modifications to safety-certified ones. This research proposes ROAM: a novel, adaptive and scalable cross-layer Real-time Optimising Ad hoc Middleware framework for the provision and maintenance of performance guarantees in self-configuring MANETs. The ROAM framework is designed to be scalable to new optimisers and MANET protocols and requires no modifications of protocol functionality. Four original contributions are proposed: (1) ROAM, a middleware entity abstracts information from the protocol stack using application programming interfaces (APIs) and that implements optimisers to monitor and autonomously tune conditions at protocol layers in response to dynamic network conditions. The cross-layer approach is MANET protocol generic, using minimal imposition on the protocol stack, without protocol modification requirements. (2) A horizontal handoff optimiser that responds to time-varying link quality to ensure optimal and most robust channel usage. (3) A distributed contention reduction optimiser that reduces channel contention and related delay, in response to detection of the presence of a hidden transmitter. (4) A feasibility evaluation of the ROAM architecture to bound maximum delay and jitter in a comprehensive range of ns2-MIRACLE simulation scenarios that demonstrate independence from the key causes of network dynamics: application setting and MANET configuration; including mobility or topology. Experimental results show that ROAM can constrain end-to-end delay, jitter and packet loss, to support real-time applications with critical timing requirements

Network delay control through adaptive queue management

Timeliness in delivering packets for delay-sensitive applications is an important QoS (Quality of Service) measure in many systems, notably those that need to provide real-time performance. In such systems, if delay-sensitive traffic is delivered to the destination beyond the deadline, then the packets will be rendered useless and dropped after received at the destination. Bandwidth that is already scarce and shared between network nodes is wasted in relaying these expired packets. This thesis proposes that a deterministic per-hop delay can be achieved by using a dynamic queue threshold concept to bound delay of each node. A deterministic per-hop delay is a key component in guaranteeing a deterministic end-to-end delay. The research aims to develop a generic approach that can constrain network delay of delay-sensitive traffic in a dynamic network. Two adaptive queue management schemes, namely, DTH (Dynamic THreshold) and ADTH (Adaptive DTH) are proposed to realize the claim. Both DTH and ADTH use the dynamic threshold concept to constrain queuing delay so that bounded average queuing delay can be achieved for the former and bounded maximum nodal delay can be achieved for the latter. DTH is an analytical approach, which uses queuing theory with superposition of N MMBP-2 (Markov Modulated Bernoulli Process) arrival processes to obtain a mapping relationship between average queuing delay and an appropriate queuing threshold, for queue management. While ADTH is an measurement-based algorithmic approach that can respond to the time-varying link quality and network dynamics in wireless ad hoc networks to constrain network delay. It manages a queue based on system performance measurements and feedback of error measured against a target delay requirement. Numerical analysis and Matlab simulation have been carried out for DTH for the purposes of validation and performance analysis. While ADTH has been evaluated in NS-2 simulation and implemented in a multi-hop wireless ad hoc network testbed for performance analysis. Results show that DTH and ADTH can constrain network delay based on the specified delay requirements, with higher packet loss as a trade-off

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

OPTIMISING APPLICATION PERFORMANCE WITH QOS SUPPORT IN AD HOC NETWORKS

The popularity of wireless communication has increased substantially over the last decade, due to mobility support, flexibility and ease of deployment. Among next generation of mobile communication technologies, Ad Hoc networking plays an important role, since it can stand alone as private network, become a part of public network, either for general use or as part of disaster management scenarios. The performance of multihop Ad Hoc networks is heavily affected by interference, mobility, limited shared bandwidth, battery life, error rate of wireless media, and the presence of hidden and exposed terminals. The scheduler and the Medium Access Control (MAC) play a vital role in providing Quality of Service (QoS) and policing delay, end-to-end throughput, jitter, and fairness for user application services. This project aims to optimise the usage of the available limited resources in terms of battery life and bandwidth, in order to reduce packet delivery time and interference, enhance fairness, as well as increase the end-to-end throughput, and increase the overall network performance. The end-to-end throughput of an Ad Hoc network decays rapidly as the hop count between the source and destination pair increases and additional flows injected along the path of an existing flow affects the flows arriving from further away; in order to address this problem, the thesis proposes a Hop Based Dynamic Fair Scheduler that prioritises flows subject to the hop count of frames, leading to a 10% increase in fairness when compared to a IEEE 802.11b with single queue. Another mechanism to improve network performance in high congestion scenarios is network-aware queuing that reduces loss and improve the end-to-end throughput of the communicating nodes, using a medium access control method, named Dynamic Queue Utilisation Based Medium Access Control (DQUB-MAC). This MAC provides higher access probability to the nodes with congested queue, so that data generated at a high rate can be forwarded more effectively. Finally, the DQUB-MAC is modified to take account of hop count and a new MAC called Queue Utilisation with Hop Based Enhanced Arbitrary Inter Frame Spacing (QU-EAIFS) is also designed in this thesis. Validation tests in a long chain topology demonstrate that DQUB-MAC and QU-EAIFS increase the performance of the network during saturation by 35% and 40% respectively compared to IEEE 802.11b. High transmission power leads to greater interference and represents a significant challenge for Ad Hoc networks, particularly in the context of shared bandwidth and limited battery life. The thesis proposes two power control mechanisms that also employ a random backoff value directly proportional to the number of the active contending neighbours. The first mechanism, named Location Based Transmission using a Neighbour Aware with Optimised EIFS for Ad Hoc Networks (LBT-NA with Optimised EIFS MAC), controls the transmission power by exchanging location information between the communicating nodes in order to provide better fairness through a dynamic EIFS based on the overheard packet length. In a random topology, with randomly placed source and destination nodes, the performance gain of the proposed MAC over IEEE 802.11b ranges from approximately 3% to above 90% and the fairness index improved significantly. Further, the transmission power is directly proportional to the distance of communication. So, the performance is high and the durability of the nodes increases compared to a fixed transmission power MAC such as IEEE 802.11b when communicating distance is shorter. However, the mechanism requires positional information, therefore, given that location is typically unavailable, a more feasible power control cross layered system called Dynamic Neighbour Aware – Power controlled MAC (Dynamic NA -PMAC)is designed to adjust the transmission power by estimating the communicating distance based on the estimated overheard signal strength. In summary, the thesis proposes a number of mechanisms that improve the fairness amongst the competing flows, increase the end-to-end throughput, decrease the delay, reduce the transmission power in Ad Hoc environments and substantially increase the overall performance of the network