Per-Priority Flow Control (Ppfc) Framework For Enhancing Qos In Metro Ethernet

Day by day Internet communication and services are experiencing an increase in variety and quantity in their capacity and demand. Thus, making traffic management and quality of service (QoS) approaches for optimization of the Internet become a challenging area of research; meanwhile flow control and congestion control will be considered as significant fundamentals for the traffic control especially on the high speed Metro Ethernet. IEEE had standardized a method (IEEE 802.3x standard), which provides Ethernet Flow Control (EFC) using PAUSE frames as MAC control frames in the data link layer, to enable or disable data frame transmission. With the initiation of Metro Carrier Ethernet, the conventional ON/OFF IEEE 802.3x approach may no longer be sufficient. Therefore, a new architecture and mechanism that offer more flexible and efficient flow and congestion control, as well as better QoS provisioning is now necessary

A quality of service architecture for WLAN-wired networks to enhance multimedia support

Includes abstract.Includes bibliographical references (leaves 77-84).The use of WLAN for the provision of IP multimedia services faces a number of challenges which include quality of service (QoS). Because WLAN users access multimedia services usually over a wired backbone, attention must be paid to QoS over the integrated WLAN-wired network. This research focuses on the provision of QoS to WLAN users accessing multimedia services over a wired backbone. In this thesis, the IEEE 802.11-2007 enhanced data channel access (EDCA) mechanism is used to provide prioritized QoS on the WLAN media access control (MAC) layer, while weighted round robin (WRR) queue scheduling is used to provide prioritized QoS at the IP layer. The inter-working of the EDCA scheme in the WLAN and the WRR scheduling scheme in the wired network provides end-to-end QoS on a WLAN-wired IP network. A mapping module is introduced to enable the inter-working of the EDCA and WRR mechanisms

A cross-layer approach to enhance QoS for multimedia applications over satellite

The need for on-demand QoS support for communications over satellite is of primary importance for distributed multimedia applications. This is particularly true for the return link which is often a bottleneck due to the large set of end-users accessing a very limited uplink resource. Facing this need, Demand Assignment Multiple Access (DAMA) is a classical technique that allows satellite operators to offer various types of services, while managing the resources of the satellite system efficiently. Tackling the quality degradation and delay accumulation issues that can result from the use of these techniques, this paper proposes an instantiation of the Application Layer Framing (ALF) approach, using a cross-layer interpreter(xQoS-Interpreter). The information provided by this interpreter is used to manage the resource provided to a terminal by the satellite system in order to improve the quality of multimedia presentations from the end users point of view. Several experiments are carried out for different loads on the return link. Their impact on QoS is measured through different application as well as network level metrics

Scheduling Architectures for DiffServ Networks with Input Queuing Switches

ue to its simplicity and scalability, the differentiated services (DiffServ) model is expected to be widely deployed across wired and wireless networks. Though supporting DiffServ scheduling algorithms for output-queuing (OQ) switches have been widely studied, there are few DiffServ scheduling algorithms for input-queuing (IQ) switches in the literaure. In this paper, we propose two algorithms for scheduling DiffServ DiffServ networks with IQ switches: the dynamic DiffServ scheduling (DDS) algorithm and the hierarchical DiffServ scheduling (HDS) algorithm. The basic idea of DDS and HDS is to schedule EF and AF traffic According to Their minimum service rates with the reserved bandwidth and schedule AF and BE traffic fairly with the excess bandwidth. Both DDS and HDS find a maximal weight matching but in different ways. DDS employs a Centralized scheduling scheme. HDS features a hierarchical scheduling scheme That Consists of two levels of schedulers: the central scheduler and port schedulers. Using such a hierarchical scheme, the Implementation complexity and the amount of information needs to be Transmitted between input ports and the central scheduler for HDS are dramatically reduced Compared with DDS. Through simulations, we show That both DDS and HDS popup Guarantees a minimum bandwidth for EF and AF traffic, as well as fair bandwidth allocation for BE traffic. The delay and jitter performance of the DDS is close to That of PQWRR, an existing DiffServ supporting scheduling algorithm for OQ switches. The tradeoff of the simpler Implementation scheme of HDS is its slightly worse delay performance Compared with DDS

Quality of Service Management and Interoperability

Information technology: general issue

Optimizing Service Differentiation Scheme with Sized-based Queue Management in DiffServ Networks

In this paper we introduced Modified Sized-based Queue Management as a dropping scheme that aims to fairly prioritize and allocate more service to VoIP traffic over bulk data like FTP as the former one usually has small packet size with less impact to the network congestion. In the same time, we want to guarantee that this prioritization is fair enough for both traffic types. On the other hand we study the total link delay over the congestive link with the attempt to alleviate this congestion as much as possible at the by function of early congestion notification. Our M-SQM scheme has been evaluated with NS2 experiments to measure the packets received from both and total link-delay for different traffic. The performance evaluation results of M-SQM have been validated and graphically compared with the performance of other three legacy AQMs (RED, RIO, and PI). It is depicted that our M-SQM outperformed these AQMs in providing QoS level of service differentiation.Comment: 10 pages, 9 figures, 1 table, Submitted to Journal of Telecommunication

Supporting differentiated quality of service in optical burst switched networks

We propose and evaluate two new schemes for providing differentiated services in optical burst switched (OBS) networks. The two new schemes are suitable for implementation in OBS networks using just-in-time (JIT) or just-enough-time (JET) scheduling protocols. The first scheme adjusts the size of the search space for a free wavelength based on the priority level of the burst. A simple equation is used to divide the search spectrum into two parts: a base part and an adjustable part. The size of the adjustable part increases as the priority of the burst becomes higher. The scheme is very easy to implement and does not demand any major software or hardware resources in optical cross-connects. The second scheme reduces the dropping probability of bursts with higher priorities through the use of different proactive discarding rates in the network access station (NAS) of the source node. Our extensive simulation tests using JIT show that both schemes are capable of providing tangible quality of service (QoS) differentiation without negatively impacting the throughput of OBS networks

Architecture design and performance analysis of practical buffered-crossbar packet switches

Combined input crosspoint buffered (CICB) packet switches were introduced to relax inputoutput arbitration timing and provide high throughput under admissible traffic. However, the amount of memory required in the crossbar of an N x N switch is N2x k x L, where k is the crosspoint buffer size and needs to be of size RTT in cells, L is the packet size. RTT is the round-trip time which is defined by the distance between line cards and switch fabric. When the switch size is large or RTT is not negligible, the memory amount required makes the implementation costly or infeasible for buffered crossbar switches. To reduce the required memory amount, a family of shared memory combined-input crosspoint-buffered (SMCB) packet switches, where the crosspoint buffers are shared among inputs, are introduced in this thesis. One of the proposed switches uses a memory speedup of in and dynamic memory allocation, and the other switch avoids speedup by arbitrating the access of inputs to the crosspoint buffers. These two switches reduce the required memory of the buffered crossbar by 50% or more and achieve equivalent throughput under independent and identical traffic with uniform distributions when using random selections. The proposed mSMCB switch is extended to support differentiated services and long RTT. To support P traffic classes with different priorities, CICB switches have been reported to use N2x k x L x P amount of memory to avoid blocking of high priority cells.The proposed SMCB switch with support for differentiated services requires 1/mP of the memory amount in the buffered crossbar and achieves similar throughput performance to that of a CICB switch with similar priority management, while using no speedup in the shared memory. The throughput performance of SMCB switch with crosspoint buffers shared by inputs (I-SMCB) is studied under multicast traffic. An output-based shared-memory crosspoint buffered (O-SMCB) packet switch is proposed where the crosspoint buffers are shared by two outputs and use no speedup. The proposed O-SMCB switch provides high performance under admissible uniform and nonuniform multicast traffic models while using 50% of the memory used in CICB switches. Furthermore, the O-SMCB switch provides higher throughput than the I-SMCB switch. As SMCB switches can efficiently support an RTT twice as long as that supported by CICB switches and as the performance of SMCB switches is bounded by a matching between inputs and crosspoint buffers, a new family of CICB switches with flexible access to crosspoint buffers are proposed to support longer RTTs than SMCB switches and to provide higher throughput under a wide variety of admissible traffic models. The CICB switches with flexible access allow an input to use any available crosspoint buffer at a given output. The proposed switches reduce the required crosspoint buffer size by a factor of N , keep the service of cells in sequence, and use no speedup. This new class of switches achieve higher throughput performance than CICB switches under a large variety of traffic models, while supporting long RTTs. Crosspoint buffered switches that are implemented in single chips have limited scalability. To support a large number of ports in crosspoint buffered switches, memory-memory-memory (MMM) Clos-network switches are an alternative. The MMM switches that use minimum memory amount at the central module is studied. Although, this switch can provide a moderate throughput, MMM switch may serve cells out of sequence. As keeping cells in sequence in an MMM switch may require buffers be distributed per flow, an MMM with extended memory in the switch modules is studied. To solve the out of sequence problem in MMM switches, a queuing architecture is proposed for an MMM switch. The service of cells in sequence is analyzed