985 research outputs found
Recommended from our members
Survey of switching techniques in high-speed networks and their performance
One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (Asynchronous Transfer Mode). ATM can be characterized by very high speed transmission links and simple, hard wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks.A number of designs has been proposed for implementing ATM switches. While many differences exist among the proposals, the vast majority of them is based on self-routing multi-stage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routing capability and suitability for VLSI implementation.Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques has also been proposed to improve the performance of blocking and nonblocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues
Recommended from our members
Computing infrastructure issues in distributed communications systems : a survey of operating system transport system architectures
The performance of distributed applications (such as file transfer, remote login, tele-conferencing, full-motion video, and scientific visualization) is influenced by several factors that interact in complex ways. In particular, application performance is significantly affected both by communication infrastructure factors and computing infrastructure factors. Several communication infrastructure factors include channel speed, bit-error rate, and congestion at intermediate switching nodes. Computing infrastructure factors include (among other things) both protocol processing activities (such as connection management, flow control, error detection, and retransmission) and general operating system factors (such as memory latency, CPU speed, interrupt and context switching overhead, process architecture, and message buffering). Due to a several orders of magnitude increase in network channel speed and an increase in application diversity, performance bottlenecks are shifting from the network factors to the transport system factors.This paper defines an abstraction called an "Operating System Transport System Architecture" (OSTSA) that is used to classify the major components and services in the computing infrastructure. End-to-end network protocols such as TCP, TP4, VMTP, XTP, and Delta-t typically run on general-purpose computers, where they utilize various operating system resources such as processors, virtual memory, and network controllers. The OSTSA provides services that integrate these resources to support distributed applications running on local and wide area networks.A taxonomy is presented to evaluate OSTSAs in terms of their support for protocol processing activities. We use this taxonomy to compare and contrast five general-purpose commercial and experimental operating systems including System V UNIX, BSD UNIX, the x-kernel, Choices, and Xinu
A Case for Data Centre Traffic Management on Software Programmable Ethernet Switches
Virtualisation first and cloud computing later has led to a consolidation of
workload in data centres that also comprises latency-sensitive application
domains such as High Performance Computing and telecommunication. These types
of applications require strict latency guarantees to maintain their Quality of
Service. In virtualised environments with their churn, this demands for
adaptability and flexibility to satisfy. At the same time, the mere scale of
the infrastructures favours commodity (Ethernet) over specialised (Infiniband)
hardware. For that purpose, this paper introduces a novel traffic management
algorithm that combines Rate-limited Strict Priority and Deficit round-robin
for latency-aware and fair scheduling respectively. In addition, we present an
implementation of this algorithm on the bmv2 P4 software switch by evaluating
it against standard priority-based and best-effort scheduling.Comment: 8th IEEE International Conference on Cloud Networking (IEEE CloudNet
2019
Performance evaluation of shuttle-based storage and retrieval systems using discrete-time queueing network models
Shuttle-based storage and retrieval systems (SBS/RSs) are an important part of today‘s warehouses. In this work, a new approach is developed that can be applied to model different configurations of SBS/RSs. The approach is based on the modeling of SBS/RSs as discrete-time open queueing networks and yields the complete probability distributions of the performance measures
Throughput Analysis of Manual Order Picking Systems with Congestion Consideration
Throughput in manual order picking systems with narrow aisles suffers from congestion as pickers cannot pass each other. Only few models incorporate congestion but they have very strict assumptions. In this work, queueing theory is used to analyze systems with traversal routing as well as different storage policies. The models are able to estimate throughput for many alternative designs in a relatively short amount of time. New guidelines for narrow-aisle order picking systems are introduced
An analytic finite capacity queueing network model capturing blocking, congestion and spillbacks
Analytic queueing network models often assume infinite capacity for all queues. For real systems this infinite capacity assumption does not hold, but is often maintained due to the difficulty of grasping the between-queue correlation structure present in finite capacity networks. This correlation structure helps explain bottleneck effects and spillbacks, the latter being of special interest in networks containing loops because they are a source of potential deadlock. We present an analytic queueing network model which acknowledges the finite capacity of the different queues. By explicitly modeling the blocking phase the model yields a description of the congestion effects. The model is adapted for multiple server finite capacity queueing networks with an arbitrary topology and blocking-after-service. A decomposition method allowing the evaluation of the model is described. The method is validated, by comparison to both pre-existing methods and simulation results. A real application to the study of patient flow in a network of operative and post-operative units of the Geneva University Hospital is also presented
Performance Bounds for Synchronized Queueing Networks
Las redes de Petri estocásticas constituyen un modelo unificado de las diferentes extensiones de redes de colas con sincronizaciones existentes en la literatura, válido para el diseño y análisis de prestaciones de sistemas informáticos distribuidos.
En este trabajo se proponen técnicas de cálculo de cotas superiores e inferiores de las prestaciones de redes de Petri estocásticas en estado estacionario. Las cotas obtenidas son calculables en tiempo polinómico en el tamaño del modelo, por medio de la resolución de ciertos problemas de programación lineal definidos a partir de la matriz de incidencia de la red (en este sentido, las técnicas desarrolladas pueden considerarse estructurales). Las cotas calculadas dependen sólamente de los valores medios de las variables aleatorias que describen la temporización del sistema, y son independientes de los momentos de mayor orden. Esta independencia de la forma de las distribuciones de probabilidad asociadas puede considerarse como una útil generalización de otros resultados existentes para distribuciones particulares, puesto que los momentos de orden superior son, habitualmente, desconocidos en la realidad y difíciles de estimar. Finalmente, las técnicas desarrolladas se aplican al análisis de diferentes ejemplos tomados de la literatura sobre sistemas informáticos distribuidos y sistemas de fabricación. ******* Product form queueing networks have long been used for the performance evaluation of computer systems. Their success has been due to their capability of naturally expressing sharing of resources and queueing, that are typical situations of traditional computer systems, as well as to their efficient solution algorithms, of polynomial complexity on the size of the model. Unfortunately, the introduction of synchronization constraints usually destroys the product form solution, so that general concurrent and distributed systems are not easily studied with this class of models. Petri nets have been proved specially adequate to model parallel and distributed systems. Moreover, they have a well-founded theory of analysis that allows to investigate a great number of qualitative properties of the system. In the original definition, Petri nets did not include the notion of time, and tried to model only the logical behaviour of systems by describing the causal relations existing among events. This approach showed its power in the specification and analysis of concurrent systems in a way independent of the concept of time. Nevertheless the introduction of a timing specification is essential if we want to use this class of models for the performance evaluation of distributed systems. One of the main problems in the actual use of timed and stochastic Petri net models for the quantitative evaluation of large systems is the explosion of the computational complexity of the analysis algorithms. In general, exact performance results are obtained from the numerical solution of a continuous time Markov chain, whose dimension is given by the size of the state space of the model. Structural computation of exact performance measures has been possible for some subclasses of nets such as those with state machine topology. These nets, under certain assumptions on the stochastic interpretation are isomorphic to Gordon and Newell's networks, in queueing theory terminology. In the general case, efficient methods for the derivation of performance measures are still needed. Two complementary approaches to the derivation of exact measures for the analysis of distributed systems are the utilization of approximation techniques and the computation of bounds. Approximate values for the performance parameters are in general more efficiently derived than the exact ones. On the other hand, "exactness" only exists in theory! In other words, numerical algorithms must be applied in practice for the computation of exact values, therefore making errors is inevitable. Performance bounds are useful in the preliminary phases of the design of a system, in which many parameters are not known accurately. Several alternatives for those parameters should be quickly evaluated, and rejected those that are clearly bad. Exact (and even approximate) solutions would be computationally very expensive. Bounds become useful in these instances since they usually require much less computation effort. The computation of upper and lower bounds for the steady-state performance of timed and stochastic Petri nets is considered in this work. In particular, we study the throughput of transitions, defined as the average number of firings per time unit. For this measure we try to compute upper and lower bounds in polynomial time on the size of the net model, by means of proper linear programming problems defined from the incidence matrix of the net (in this sense, we develop structural techniques). These bounds depend only on the mean values and not on the higher moments of the probability distribution functions of the random variables that describe the timing of the system. The independence of the probability distributions can be viewed as a useful generalization of the performance results, since higher moments of the delays are usually unknown for real cases, and difficult to estimate and assess. From a different perspective, the obtained results can be applied to the analysis of queueing networks extended with some synchronization schemes. Monoclass queueing networks can be mapped on stochastic Petri nets. On the other hand, stochastic Petri nets can be interpreted as monoclass queueing networks augmented with synchronization primitives. Concerning the presentation of this manuscript, it should be mentioned that chapter 1 has been written with the object of giving the reader an outline of the stochastic Petri net model: its definition, terminology, basic properties, and related concepts, together with its deep relation with other classic stochastic network models. Chapter 2 is devoted to the presentation of the net subclasses considered in the rest of the work. The classification presented here is quite different from the one which is usual in the framework of Petri nets. The reason lies on the fact that our classification criterion, the computability of visit ratios for transitions, is introduced for the first time in the field of stochastic Petri nets in this work. The significance of that criterion is based on the important role that the visit ratios play in the computation of upper and lower bounds for the performance of the models. Nevertheless, classical important net subclasses are identified here in terms of the computability of their visit ratios from different parameters of the model. Chapter 3 is concerned with the computation of reachable upper and lower bounds for the most restrictive subclass of those presented in chapter 2: marked graphs. The explanation of this fact is easy to understand. The more simple is the model the more accessible will be the techniques an ideas for the development of good results. Chapter 4 provides a generalization for live and bounded free choice nets of the results presented in the previous chapter. Quality of obtained bounds is similar to that for strongly connected marked graphs: throughput lower bounds are reachable for bounded nets while upper bounds are reachable for 1-bounded nets. Chapter 5 considers the extension to other net subclasses, like mono-T-semiflow nets, FRT-nets, totally open deterministic systems of sequential processes, and persistent nets. The results are of diverse colours. For mono-T-semiflow nets and, therefore, for general FRT-nets, it is not possible (so far) to obtain reachable throughput bounds. On the other hand, for bounded ordinary persistent nets, tight throughput upper bounds are derived. Moreover, in the case of totally open deterministic systems of sequential processes the exact steady-state performance measures can be computed in polynomial time on the net size. In chapter 6 bounds for other interesting performance measures are derived from throughput bounds and from classical queueing theory laws. After that, we explore the introduction of more information from the probability distribution functions of service times in order to improve the bounds. In particular, for Coxian service delay of transitions it is possible to improve the throughput upper bounds of previous chapters which held for more general forms of distribution functions. This improvement shows to be specially fruitful for live and bounded free choice nets. Chapter 7 is devoted to case studies. Several examples taken from literature in the fields of distributed computing systems and manufacturing systems are modelled by means of stochastic Petri nets and evaluated using the techniques developed in previous chapters. Finally, some concluding remarks and considerations on possible extensions of the work are presented
- …