1,980 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Preliminary Results on 3D Channel Modeling: From Theory to Standardization
Three dimensional beamforming (3D) (also elevation beamforming) is now
gaining a growing interest among researchers in wireless communication. The
reason can be attributed to its potential to enable a variety of strategies
like sector or user specific elevation beamforming and cell-splitting. Since
these techniques cannot be directly supported by current LTE releases, the 3GPP
is now working on defining the required technical specifications. In
particular, a large effort is currently made to get accurate 3D channel models
that support the elevation dimension. This step is necessary as it will
evaluate the potential of 3D and FD(Full Dimensional) beamforming techniques to
benefit from the richness of real channels. This work aims at presenting the
on-going 3GPP study item "Study on 3D-channel model for Elevation Beamforming
and FD-MIMO studies for LTE", and positioning it with respect to previous
standardization works
Massive MIMO-based Localization and Mapping Exploiting Phase Information of Multipath Components
In this paper, we present a robust multipath-based localization and mapping
framework that exploits the phases of specular multipath components (MPCs)
using a massive multiple-input multiple-output (MIMO) array at the base
station. Utilizing the phase information related to the propagation distances
of the MPCs enables the possibility of localization with extraordinary accuracy
even with limited bandwidth. The specular MPC parameters along with the
parameters of the noise and the dense multipath component (DMC) are tracked
using an extended Kalman filter (EKF), which enables to preserve the
distance-related phase changes of the MPC complex amplitudes. The DMC comprises
all non-resolvable MPCs, which occur due to finite measurement aperture. The
estimation of the DMC parameters enhances the estimation quality of the
specular MPCs and therefore also the quality of localization and mapping. The
estimated MPC propagation distances are subsequently used as input to a
distance-based localization and mapping algorithm. This algorithm does not need
prior knowledge about the surrounding environment and base station position.
The performance is demonstrated with real radio-channel measurements using an
antenna array with 128 ports at the base station side and a standard cellular
signal bandwidth of 40 MHz. The results show that high accuracy localization is
possible even with such a low bandwidth.Comment: 14 pages (two columns), 13 figures. This work has been submitted to
the IEEE Transaction on Wireless Communications for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
- …