Measurement Based Reconfigurations in Optical Ring Metro Networks

Single-hop wavelength division multiplexing (WDM) optical ring networks operating in packet mode are one of themost promising architectures for the design of innovative metropolitan network (metro) architectures. They permit a cost-effective design, with a good combination of optical and electronic technologies, while supporting features like restoration and reconfiguration that are essential in any metro scenario. In this article, we address the tunability requirements that lead to an effective resource usage and permit reconfiguration in optical WDM metros.We introduce reconfiguration algorithms that, on the basis of traffic measurements, adapt the network configuration to traffic demands to optimize performance. Using a specific network architecture as a reference case, the paper aims at the broader goal of showing which are the advantages fostered by innovative network designs exploiting the features of optical technologies

Optimizing resource allocation in next-generation optical access networks

To meet rapidly increasing traffic demands caused by the popularization of Internet and the spouting of bandwidth-demanding applications, Passive Optical Networks (PONs) exploit the potential capacities of optical fibers, and are becoming promising future-proof access network technologies. On the other hand, for a broader coverage area and higher data rate, integrated optical and wireless access is becoming a future trend for wireless access. This thesis investigates three next-generation access networks: Time Division Multiplexing (TDM) PONs, Wavelength Division Multiplexing (WDM) PONs, and WDM Radio-Over-Fiber (RoF) Picocellular networks. To address resource allocation problems in these three networks, this thesis first investigates respective characteristics of these networks, and then presents solutions to address respective challenging problems in these networks. In particular, three main problems are addressed: arbitrating time allocation among different applications to guarantee user quality of experience (QoE) in TDM PONs, scheduling wavelengths optimally in WDM PONs, and jointly allocating fiber and radio resources in WDM RoF Picocellular networks. In-depth theoretical analysis and extensive simulations have been performed in evaluating and demonstrating the performances of the proposed schemes

Wavelength and time division multiplexing with lightpath trespassing for all-optical star local area networks

Many medium access control protocols have been proposed for optical wavelength division multiplexing local area networks with a star topology. These protocols range from those based on the concept of fixed-assignment of communication subchannels, such as TDMA (Time Division Multiple Access); reservation of communication subchannels, such as DAS (Dynamic Allocation Scheme); or random-access to communication subchannels, such as DT-WDMA (Dynamic Time-Wavelength Division Multiple Access). In addition various hybrid protocols have been considered, for example, protocols incorporating both fixed-assignment and reservation rules, such as HTDM (Hybrid TDM). This thesis is on a novel hybrid protocol of fixed-assignment and random-access called "WTDMA with lightpath trespassing". This protocol combines the most desirable aspects of fixed-assignment and random-access protocols, while limiting their drawbacks. The performance of different versions of the protocol are analysed both mathematically and by stochastic simulation. The obtained results justify the introduction of the WTDMA with trespassing protocol, and indicate the situations where its use is advantageous

Hardware-Software Integrated Silicon Photonic Systems

Fabrication of integrated photonic devices and circuits in a CMOS-compatible process or foundry is the essence of the silicon photonic platform. Optical devices in this platform are enabled by the high index contrast between silicon and silicon on insulator. These devices offer potential benefits when integrated with existing and emerging high performance microelectronics. Integration of silicon photonics with small footprints and power-efficient and high-bandwidth operation has long been cited as a solution to existing issues in high performance interconnects for telecommunications and data communication. Stemming from this historic application in communications, new applications in sensing arrays, biochemistry, and even entertainment continue to grow. However, for many technologies to successfully adopt silicon photonics and reap the perceived benefits, the silicon photonic platform must extend toward development of a full ecosystem. Such extension includes implementation of low cost and robust electronic-photonic packaging techniques for all applications. In an ecosystem implemented with services ranging from device fabrication all the way to packaged products, ease-of-use and ease-of-deployment in systems that require many hardware and software components becomes possible. With the onset of the Internet of Things (IoT), nearly all technologies—sensors, compute, communication devices, etc.—persist in systems with some level of localized or distributed software interaction. These interactions often require a level of networked communications. For silicon photonics to penetrate technologies comprising IoT, it is advantageous to implement such devices in a hardware-software integrated way. Meaning, all functionalities and interactions related to the silicon photonic devices are well defined in terms of the physicality of the hardware. This hardware is then abstracted into various levels of software as needed in the system. The power of hardware-software integration allows many of the piece-wise demonstrated functionalities of silicon photonics to easily translate to commercial implementation. This work begins by briefly highlighting the challenges and solutions for transforming existing silicon photonic platforms to a full-fledged silicon photonic ecosystem. The highlighted solutions in development consist of tools for fabrication, testing, subsystem packaging, and system validation. Building off the knowledge of a silicon photonic ecosystem in development, this work continues by demonstrating various levels of hardware-software integration. These are primarily focused on silicon photonic interconnects. The first hardware-software integration-focused portion of this work explores silicon microring-based devices as a key building block for greater silicon photonic subsystems. The microring’s sensitivity to thermal fluctuations is identified not as a flaw, but as a tool for functionalization. A logical control system is implemented to mitigate thermal effects that would normally render a microring resonator inoperable. The mechanism to control the microring is extended and abstracted with software programmability to offer wavelength routing as a network primitive. This functionality, available through hardware-software integration, offers the possibility for ubiquitous deployment of such microring devices in future photonic interconnection networks. The second hardware-software integration-focused portion of this work explores dynamic silicon photonic switching devices and circuits. Specifically, interactions with and implications of high-speed data propagation and link layer control are demonstrated. The characteristics of photonic link setup include transients due to physical layer optical effects, latencies involved with initializing burst mode links, and optical link quality. The impacts on the functionalities and performance offered by photonic devices are explored. An optical network interface platform is devised using FPGAs to encapsulate hardware and software for controlling these characteristics using custom hardware description language, firmware, and software. A basic version of a silicon photonic network controller using FPGAs is used as a tool to demonstrate a highly scalable switch architecture using microring resonators. This architecture would not be possible without some semblance of this controller, combined with advanced electronic-photonic packaging. A more advanced deployment of the network interface platform is used to demonstrate a method for accelerating photonic links using out-of-band arbitration. A first demonstration of this platform is performed on a silicon photonic microring router network. A second demonstration is used to further explore the feasibility of full hardware-software integrated photonic device actuation, link layer control, and out-of-band arbitration. The demonstration is performed on a complete silicon photonic network with both spatial switching and wavelength routing functionalities. The aforementioned hardware-software integration mechanisms are rigorously tested for data communications applications. Capabilities are shown for very reliable, low latency, and dynamic high-speed data delivery using silicon photonic devices. Applying these mechanisms to complete electronic-photonic packaged subsystems provides a strong path to commercial manifestations of functional silicon photonic devices

Dynamic Optical Networks for Data Centres and Media Production

This thesis explores all-optical networks for data centres, with a particular focus on network designs for live media production. A design for an all-optical data centre network is presented, with experimental verification of the feasibility of the network data plane. The design uses fast tunable (< 200 ns) lasers and coherent receivers across a passive optical star coupler core, forming a network capable of reaching over 1000 nodes. Experimental transmission of 25 Gb/s data across the network core, with combined wavelength switching and time division multiplexing (WS-TDM), is demonstrated. Enhancements to laser tuning time via current pre-emphasis are discussed, including experimental demonstration of fast wavelength switching (< 35 ns) of a single laser between all combinations of 96 wavelengths spaced at 50 GHz over a range wider than the optical C-band. Methods of increasing the overall network throughput by using a higher complexity modulation format are also described, along with designs for line codes to enable pulse amplitude modulation across the WS-TDM network core. The construction of an optical star coupler network core is investigated, by evaluating methods of constructing large star couplers from smaller optical coupler components. By using optical circuit switches to rearrange star coupler connectivity, the network can be partitioned, creating independent reserves of bandwidth and resulting in increased overall network throughput. Several topologies for constructing a star from optical couplers are compared, and algorithms for optimum construction methods are presented. All of the designs target strict criteria for the flexible and dynamic creation of multicast groups, which will enable future live media production workflows in data centres. The data throughput performance of the network designs is simulated under synthetic and practical media production traffic scenarios, showing improved throughput when reconfigurable star couplers are used compared to a single large star. An energy consumption evaluation shows reduced network power consumption compared to incumbent and other proposed data centre network technologies

Survivable virtual topology design in optical WDM networks using nature-inspired algorithms

Tez (Doktora) -- İstanbul Teknik Üniversitesi, Bilişim Enstitüsü, 2012Thesis (PhD) -- İstanbul Technical University, Institute of Informatics, 2012Günümüzde bilgisayar ağları hayatımızın önemli bir parçası ve ihtiyaç haline gelmiştir. İstediğimiz veriye, istediğimiz anda, daha hızlı, daha güvenli ve kesintisiz olarak erişme isteğimiz aslında ağ altyapısının nasıl tasarlanacağını belirlemektedir. Kullanıcıların istekleri sürekli artarken, teknolojik gelişmelerle birlikte yeni yöntem ve algoritmalarla bu istekleri karşılamanın yolları aranmaktadır. Ağdaki aktarım hızı, aktarım ortamından doğrudan etkilenmektedir; bugün uzak mesafelere en yüksek kapasiteli ve hızlı aktarımın yapılabileceği ortam ise fiberdir. Fiber optik ağlar, fiberin üstün özelliklerini (hız, düşük bit hata oranı, elektromanyetik ortamlardan etkilenmeme, düşük işaret zayıflaması, fiziksel dayanıklılık, ucuzluk, güvenlilik, vs.) en iyi kullanacak şekilde tasarlanan ağlardır. Günümüzde dünyadaki iletişim ağ altyapısı, omurga ağlardan erişim ağlarına kadar, hızla fiber optik ağlara dönüşmektedir. Optik ağların en önemli özelliklerinden biri veri aktarım hızıdır, tek bir fiberden teorik olarak 50 Tb/s veri aktarımı yapılabileceği hesaplanmaktadır. Bugün, lider iletişim firmaları 100 Gb/s ya da 1 Tb/s hızda veri aktarımı yapacak kanalllardan bahsedebiliyorsa, bu, fiziksel altyapı optik bir omurgadan oluştuğu içindir. Dalgaboyu bölmeli çoğullama (WDM) teknolojisi sayesinde bir fiber üzerinde aynı anda kurulabilecek kanal sayısı, günümüz teknolojisiyle yüzler mertebesine çıkabilmektedir. Dalgaboyu bölmeli çoğullama teknolojisi ile, optik aktarım birbiriyle çakışmayan dalgaboyu bantlarına bölünür ve her bir dalgaboyu istenen hızda çalışan, ışıkyolu olarak adlandırılan, bir iletişim kanalını destekler. Böylece, yakın gelecek için öngörülen çok yüksek hızlara çıkmadan bile, bir fiberden herbiri birkaç on Gb/s hızda çalışan yüz dolayında ışıkyolu geçebilmektedir. Bu kadar yüksek hızlarda veri aktarımı, özellikle her bir fiberinde çok sayıda kanalın taşındığı omurga ağlarda bir konuya büyük önem kazandırmaktadır: Hataya bağışıklık. En sık rastlanan hata olan, bir fiberin, herhangi bir nedenle kesilmesi (çoğunlukla inşaat makineleri tarafından, ya da doğal afetlerce), fiber tamir edilene kadar, her saniyede birkaç terabitlik veri kaybı anlamına gelecektir. Örnek olarak 10 km uzunlukta bir fiberin kopma sıklığı 11 yılda birdir. Omurga ağlarda yüzlerce, bazen binlerce, kilometrelik fiberler döşendiği gözönüne alındığında, böyle bir hata durumu için tedbir alınmaması düşünülemez. Optik ağ üzerindeki herhangi bir fibere zarar gelmesi demek bu fiber üzerinden yönlendirilmiş olan tüm ışıkyollarının kopması demektir. Her bir ışıkyolu üzerinden yüksek miktarda (40 Gb/s) veri aktarımı yapıldığından, böyle bir zarar ciddi veri kayıplarına neden olabilir. Temel olarak fiber kopmasına karşı geliştirilen iki yaklaşım vardır. Birinci yaklaşımda fiber üzerinden geçen her bir bağlantının, yani ışıkyolunun, yedek yollarla korunmasıdır. İkinci yaklaşım ise, özellikle birçok internet uygulamasına da uygun ve yeterli olacak şekilde, ışıkyollarının oluşturduğu sanal topolojinin bağlı kalmasının sağlanmasıdır. Bu ikinci yaklaşımda herbir ışıkyoluna ayrı ayrı yedek koruma yollarının atanması yerine, sanal topolojinin korunması dikkate alınarak, üst katmanların (paket katmanları) koruma mekanizmalarının devreye girebilmesi için gereken minimum koşulların sağlanması amaçlanmaktadır. Birinci yaklaşım belirli düzeylerde garantili bir koruma sağlarken yüksek miktarda ağ kaynağının atıl durmasına neden olmakta, dolayısıyla bu kadar üst düzey koruma gerektirmeyen uygulamalar için pahalı bir çözüm sunmaktadır. Son yıllarda özellikle dikkat çeken ikinci yaklaşım ise, daha ekonomik bir yöntemle iletişimin kopmaması garantisini vermekte, ancak daha yavaş bir düzeltme sağlamaktadır. Günümüzde birçok uygulama bağlantı kopmadığı sürece paket katmanının, yeni yol bulma gibi hata düzeltme mekanizmalarının devreye girmesi için gerekli olan, dakikalar mertebesindeki gecikmelere toleranslıdır (web dolaşımı, dosya aktarımı, mesajlaşma, uzaktan erişim gibi). Bu yaklaşım ilkine göre daha az ağ kaynağının atıl kalmasına neden olarak kullanıcıya daha ekonomik hizmet verilmesini sağlayacaktır. Bu çalışmada üzerinde durduğumuz hataya bağışık sanal topoloji tasarımı problemi de bu ikinci yaklaşımı benimsemektedir. Hataya bağışık sanal topoloji tasarımı problemi kendi içinde dört alt probleme ayrılmaktadır: ışıkyollarının belirlenmesi (sanal topolojiyi oluşturma), bu ışıkyollarının herhangi bir fiber kopması durumunda bile sanal topolojinin bağlı kalmasını sağlayacak sekilde fiziksel topoloji üzerinde yönlendirilmesi, dalgaboyu atanması, ve paket trafiğinin yönlendirilmesi. Bu alt problemler ayrı ayrı çözülebilir. Ancak, bunlar bağımsız problemler değildir ve bunları tek tek çözmek elde edilen çözümün kalitesinin çok düşük olmasına neden olabilir. Bununla birlikte, hataya bağışık sanal topoloji tasarımı problemi NP-karmaşıktır. Karmaşıklığı nedeniyle bu problemin, gerçek boyutlu ağlar için, klasik optimizasyon teknikleriyle kabul edilebilir zamanda çözülmesi mümkün değildir. Bu çalışmada, fiziksel topolojinin ve düğümler arası paket trafiği yoğunluğunun bilindiği durumlar için, hataya bağışık sanal topoloji tasarımı problemi bütün halinde ele alınmaktadır. Tezin ilk aşamasında, hataya bağışık sanal topoloji tasarımı probleminin alt problemi olan hataya bağışık sanal topoloji yönlendirmesi problemi ele alınmıştır. Verilen bir sanal topoloji için en az kaynak kullanarak hataya bağışık yönlendirme yapmak için iki farklı doğa-esinli algoritma önerilmektedir: evrimsel algoritmalar ve karınca kolonisi optimizasyonu. Öncelikle önerilen algoritmaların problem için uygun parametre kümesi belirlenmiş, daha sonra, algoritmaların başarımını ölçmek için, deneysel sonuçlar tamsayı doğrusal programlama (ILP) ile elde edilen sonuçlarla karşılaştırılmışır. Sonuçlar göstermektedir ki; önerdiğimiz iki algoritma da, tamsayı doğrusal programlama ile uygun bir çözüm bulunamayan büyük ölçekli ağlar için dahi, problemi çözebilmektedir. Bunun yanında, doğa-esinli algoritmalar çok daha az CPU zamanı ve hafıza kullanmaktadır. Elde edilen çözüm kalitesi ve çözüm için kullanılan CPU zamanının kabul edilebilir düzeyde olması, her iki doğa-esinli algoritmanın da gerçek boyutlu ağlar için kullanılabileceğini doğrulamaktadır. İkinci aşamada, hataya bağışık sanal topoloji tasarımı problemini bir bütün halinde çözmek için dört farklı üst-sezgisel yöntem önerilmektedir. Önerilen üst-sezgisel yöntemler alt seviyedeki sezgiselleri seçme asamasında dört farklı yöntem kullanmaktadır: evrimsel algoritmalar, benzetimli tavlama, karınca kolonisi optimizasyonu ve uyarlamalı yinelenen yapıcı arama. Deneysel sonuçlar tüm üst-sezgisel yöntemlerin hataya bağışık sanal topoloji tasarımı problemini çözmede başarılı olduğunu göstermektedir. Ancak, karınca kolonisi optimizasyonu tabanlı üst-sezgisel diğerlerine göre daha üstün sonuçlar vermektedir. Işıkyolları üzerindeki trafik akışını dengelemek için, karınca kolonisi optimizasyonu tabanlı üst-sezgisele akış deviasyonu yöntemi de eklenmiştir. Literatürde hataya bağışık sanal topoloji tasarımı problemini ele alan tüm çalışmalar çift fiber kopması durumunu gözardı etmektedir. Bu çalışmada, önerdiğimiz üst-sezgisel yöntemin başarımını hem tek hem de çift fiber kopması durumları için değerlendirdik. Önerdiğimiz yöntem çoklu fiber kopması durumları için çok kolay şekilde adapte edilebilmektedir. Tek yapılması gereken hataya bağışıklık kontrolünü yapan yordamın değiştirilmesidir. Deneysel sonuçlar göstermiştir ki, önerdiğimiz karınca kolonisi optimizasyonu tabanlı üst-sezgisel hataya bağışık sanal topoloji tasarımı problemini hem tek hem de çift fiber kopması durumları için kabul edilebilir bir sürede çözebilmektedir. Üst-sezgisel yöntemlerin hataya bağışık sanal topoloji tasarımı çözmedeki başarımını değerlendirebilmek amacıyla, karınca kolonisi optimizasyonu tabanlı üst-sezgiselle elde edilen sonuçlar, literatürde bu problem için önerilmiş başka bir yöntemle karşılaştırılmıştır. Sonuçlar üst-sezgisel yöntemlerin, çok daha az CPU zamanı kullanarak, problem için daha kaliteli çözümler verdiğini göstermektedir.Today, computer networking has become an integral part of our daily life. The steady increase in user demands of high speed and high bandwidth networks causes researchers to seek out new methods and algorithms to meet these demands. The transmission speed in the network is directly affected by the transmission medium. The most effective medium to transmit data is the fiber. Optical networks are designed for the best usage of the superior properties of the fiber, e.g. high speed, high bandwidth, low bit error rate, low attenuation, physical strength, cheapness, etc. The world's communication network infrastructure, from backbone networks to access networks, is consistently turning into optical networks. One of the most important properties of the optical networks is the data transmission rate (up to 50 Tb/s on a single fiber). Today, with the help of the wavelength division multiplexing (WDM) technology, hundreds of channels can be built on a single fiber. WDM is a technology in which the optical transmission is split into a number of non-overlapping wavelength bands, with each wavelength supporting a single communication channel operating at the desired rate. Since multiple WDM channels, also called lightpaths, can coexist on a single fiber, the huge fiber bandwidth can be utilized. Any damage to a physical link (fiber) on the network causes all the lightpaths routed through this link to be broken. Since huge data transmission (40 Gb/s) over each of these lightpaths is possible, such a damage results in a serious amount of data loss. Two different approaches can be used in order to avoid this situation: 1. Survivability on the physical layer, 2. Survivability on the virtual layer. The first approach is the problem of designing a backup link/path for each link/path of the optical layer. The second approach is the problem of designing the optical layer such that the optical layer remains connected in the event of a single or multiple link failure. While the first approach provides faster protection for time-critical applications (such as, IP phone, telemedicine) by reserving more resources, the second approach, i.e. the survivable virtual topology design, which has attracted a lot of attention in recent years, aims to protect connections using less resources. The problem that will be studied in this project is to develop methods for survivable virtual topology design, that enables effective usage of the resources. Survivable virtual topology design consists of four subproblems: determining a set of lightpaths (forming the virtual topology), routing these lightpaths on the physical topology (routing and wavelength assignment (RWA) problem), so that any single fiber cut does not disconnect the virtual topology (survivable virtual topology mapping), assigning wavelengths, and routing the packet traffic. Each of these subproblems can be solved separately. However, they are not independent problems and solving them one by one may degrade the quality of the final result considerably. Furthermore, the survivable virtual topology design is known to be NP-complete. Because of its complexity, it is not possible to solve the problem optimally in an acceptable amount of time using classical optimization techniques, for real-life sized networks. In this thesis, we solve the survivable virtual topology design problem as a whole, where the physical topology and the packet traffic intensities between nodes are given. In the first phase, we propose two different nature inspired heuristics to find a survivable mapping of a given virtual topology with minimum resource usage. Evolutionary algorithms and ant colony optimization algorithms are applied to the problem. To assess the performance of the proposed algorithms, we compare the experimental results with those obtained through integer linear programming. The results show that both of our algorithms can solve the problem even for large-scale network topologies for which a feasible solution cannot be found using integer linear programming. Moreover, the CPU time and the memory used by the nature inspired heuristics is much lower. In the second phase, we propose four different hyper-heuristic approaches to solve the survivable virtual topology design problem as a whole. Each hyper-heuristic approach is based on a different category of nature inspired heuristics: evolutionary algorithms, ant colony optimization, simulated annealing, and adaptive iterated constructive search. Experimental results show that, all proposed hyper-heuristic approaches are successful in designing survivable virtual topologies. Furthermore, the ant colony optimization based hyper-heuristic outperforms the others. To balance the traffic flow over lightpaths, we adapt a flow-deviation method to the ant colony optimization based hyper-heuristic approach. We explore the performance of our hyper-heuristic approach for both single and double-link failures. The proposed approach can be applied to the multiple-link failure problem instances by only changing the survivability control routine. The experimental results show that our approach can solve the problem for both single-link and double-link failures in a reasonable amount of time. To evaluate the quality of the HH approach solutions, we compare these results with the results obtained using tabu search approach. The results show that HH approach outperforms tabu search approach both in solution quality and CPU time.DoktoraPh

Design space exploration of photonic interconnects

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 109-113).As processors scale deep into the multi-core and many-core regimes, bandwidth and energy-efficiency of the on-die interconnect network have become paramount design issues. Recognizing potential limits of electrical interconnects, emerging nanophotonic integration has been recently proposed as a potential technology option for both on-chip and chip-to-chip applications. As optical links avoid the capacitive, resistive and signal integrity limits imposed upon electrical interconnects, the introduction of integrated photonics allows for efficient realization of physical connectivity that are costly to accomplish electrically. While many recent works have since cited the potential benefits of optics, inherent design tradeoffs of photonic datapath and backend components remain relatively unknown at the system-level. This thesis develops insights regarding the behavior of electrical and hybrid optoelectrical networks and systems. We present power and area models that capture the behavior of electrical interface circuits and their interactions with optical devices. To animate these models in the context of a full system, we contribute DSENT, a novel physical modeling framework capable of estimating the costs of generalized digital electronics, mixed-signal interface circuitry, and optical links. With DSENT, we enable fast power and area evaluation of entire networks to connect the dynamics of an underlying photonics interconnect to that of an otherwise electrical system. Using our methodolody, we perform a technology-driven design space exploration of intra-chip networks and highlight the importance of thermal tuning and parasitic receiver capacitances in network power consumption. We show that the performance gains enabled by photonics-inspired architectures can enable savings in total system energy even if the network is more costly. Finally, we propose a photonically interconnected DRAM system as a solution to the core-to-DRAM bandwidth bottleneck. By attacking energy consumption at the DRAM channel, chip, and bank level with integrated photoncis, we cut the power consumption of the DRAM system by 10x while remaining area neutral when compared to a projected electrical baseline.by Chen Sun.S.M