Customized Pull Systems for Single-Product Flow Lines

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage of that line with each preceding stage; optimization of the corresponding simulation model, however, shows which of these potential control loops are actually implemented. This novel approach may result in one of the classic systems, but it may also be another type: (1) the total line may be decomposed into several segments, each with its own classic control system (e.g., segment 1 with Kanban, segment 2 with Conwip); (2) the total line or segments may combine different classic systems; (3) the line may be controlled through a new type of system. These different pull systems are found when applying the new approach to a set of twelve production lines. These lines are configured through the application of a statistical (Plackett-Burman) design with ten factors that characterize production lines (such as line length, demand variability, and machine breakdowns).Pull production / inventory;sampling;optimization;evolutionary algorithm

Customized Pull Systems for Single-Product Flow Lines

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage of that line with each preceding stage; optimization of the corresponding simulation model, however, shows which of these potential control loops are actually implemented. This novel approach may result in one of the classic systems, but it may also be another type: (1) the total line may be decomposed into several segments, each with its own classic control system (e.g., segment 1 with Kanban, segment 2 with Conwip); (2) the total line or segments may combine different classic systems; (3) the line may be controlled through a new type of system. These different pull systems are found when applying the new approach to a set of twelve production lines. These lines are configured through the application of a statistical (Plackett-Burman) design with ten factors that characterize production lines (such as line length, demand variability, and machine breakdowns).

New species of hybrid pull systems

production models;control systems;simulation

Evaluation of Pull Production Control Strategies Under Uncertainty: An Integrated Fuzzy Ahp-Topsis Approach

Purpose: Just-In-Time (JIT) production has continuously been considered by industrial practitioners and researchers as a leading strategy for the yet popular Lean production. Pull Production Control Policies (PPCPs) are the major enablers of JIT that locally control the level of inventory by authorizing the production in each station. Aiming to improve the PPCPs, three authorization mechanisms: Kanban, constant-work-in-process (ConWIP), and a hybrid system, are evaluated by considering uncertainty. Design/methodology/approach: Multi-Criteria Decision Making (MCDM) methods are successful in evaluating alternatives with respect to several objectives. The proposed approach of this study applies the fuzzy set theory together with an integrated Analytical Hierarchy Process (AHP) and a Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) method. Findings: The study finds that hybrid Kanban-ConWIP pull production control policies have a better performance in controlling the studied multi-layer multi-stage manufacturing and assembly system. Practical implications: To examine the approach a real case from automobile electro-mechanical part production industry is studied. The production system consists of multiple levels of manufacturing, feeding a multi-stage assembly line with stochastic processing times to satisfy the changing demand. Originality/value: This study proposes the integrated Kanban-ConWIP hybrid pull control policies and implements several alternatives on a multi-stage and multi-layer manufacturing and assembly production system. An integrated Fuzzy AHP TOPSIS method is developed to evaluate the alternatives with respect to several JIT criteriaPeer Reviewe

Designing a robust production system for erratic demand environments.

Production systems must have the right type of material in the right quantities when required for production. They must minimize the work in progress while ensuring no stock-outstock-out occurs. While these twin opposing goals are achievable when demand is stable, they are difficult to realize under an erratic demand pattern. This dissertation aims to develop a production system that can meet erratic demands with minimal costs or errors. After a detailed introduction to the problem considered, we review the relevant literature. We then conduct a numerical analysis of current production systems, identify their deficiencies, and then present our solution to address these deficiencies via the ARK (Automated Replenishment System) technique. This technique is applied to a real-world problem at Methode Engineering ©. We conclude by detailing the scientific benefit of our technique and proposing ideas for future research

Judgement and supply chain dynamics

Forecasting demand at the individual stock-keeping-unit (SKU) level often necessitates the use of statistical methods, such as exponential smoothing. In some organizations, however, statistical forecasts will be subject to judgemental adjustments by managers. Although a number of empirical and ‘laboratory’ studies have been performed in this area, no formal OR modelling has been conducted to offer insights into the impact such adjustments may have on supply chain performance and the potential development of mitigation mechanisms. This is because of the associated dynamic complexity and the situation-specific nature of the problem at hand. In conjunction with appropriate stock control rules, demand forecasts help decide how much to order. It is a common practice that replenishment orders may also be subject to judgemental intervention, adding further to the dynamic system complexity and interdependence. The system dynamics (SD) modelling method can help advance knowledge in this area, where mathematical modelling cannot accommodate the associated complexity. This study, which constitutes part of a UK government funded (EPSRC) project, uses SD models to evaluate the effects of forecasting and ordering adjustments for a wide set of scenarios involving: three different inventory policies; seven different (combinations of) points of intervention; and four different (combinations of) types of judgmental intervention (optimistic and pessimistic). The results enable insights to be gained into the performance of the entire supply chain. An agenda for further research concludes the paper

Designing pull production control systems:Customization and robustness

In this dissertation we address the issues of selecting and configuring pull production control systems for single-product flowlines. We start with a review of pull systems in the literature, yielding a new classification. Then we propose a novel selection procedure based on a generic system that we test on a case also studied in the literature. We further study our procedure for a variety of twelve production lines. We find new types of pull systems that perform well. Next, we raise the issue of designing pull systems under uncertainty. We propose a novel procedure to minimize the risk of poor performance. Results show that risk considerations strongly influence the selection of a specific pull system

A novel throughput control algorithm for semi-heterarchical industry 4.0 architecture

Modern market scenarios are imposing a radical change in the production concept, driving companies’ attention to customer satisfaction through increased product customization and quick response strategies to maintain competitiveness. At the same time, the growing development of Industry 4.0 technologies made possible the creation of new manufacturing paradigms in which an increased level of autonomy is one of the key concepts to consider. Taking the advantage from the recent development around the semi-heterarchical architecture, this work proposes a first model for the throughput control of a production system managed by such an architecture. A cascade control algorithm is proposed considering work-in-progress (WIP) as the primary control lever for achieving a specific throughput target. It is composed of an optimal control law based on an analytical model of the considered production system, and of a secondary proportional-integral-derivative controller capable of performing an additional control action that addresses the error raised by the theoretical model’s. The proposed throughput control algorithm has been tested in different simulated scenarios, and the results showed that the combination of the control actions made it possible to have continuous adjustment of the WIP of the controlled production system, maintaining it at the minimum value required to achieve the requested throughput with nearly zero errors