Modeling and Mitigation of Wireless Communications Interference for Spectrum Sharing with Radar

Due to both economic incentives and policy mandates, researchers increasingly face the challenge of enabling spectrum sharing between radar and wireless communications systems. In the past eight years, researchers have begun to suggest a wide variety of approaches to radar-communications spectrum sharing, ranging from transmitter design to receiver design, from spatial to temporal to other-dimensional multiplexing, and from cooperative to non-cooperative sharing. Within this diverse field of innovation, this dissertation makes two primary contributions. First, a model for wireless communications interference and its effects on adaptive-threshold radar detection is proposed. Based on both theoretical and empirical study, we find evidence for both Gaussian and non-Gaussian communications interference models, depending on the modeling situation. Further, such interference can impact radar receivers via two mechanisms—model mismatch and boost to the underlying noise floor—and both mechanisms deserve attention. Second, an innovative signal processing algorithm is proposed for radar detection in the presence of cyclostationary, linearly-modulated, digital communications (LMDC) interference (such as OFDM or CDMA) and a stationary background component. The proposed detector consists of a novel whitening filter followed by the traditional matched filter. Performance results indicate that the proposed cyclostationary-based detector outperforms a standard equivalent detector based on a stationary interference model, particularly when the number of cyclostationary LMDC transmitters is small and their interference-to-noise ratio (INR) is large relative to the stationary background

Characterization and Emulation of Low-Voltage Power Line Channels for Narrowband and Broadband Communication

The demand for smart grid and smart home applications has raised the recent interest in power line communication (PLC) technologies, and has driven a broad set of deep surveys in low-voltage (LV) power line channels. This book proposes a set of novel approaches, to characterize and to emulate LV power line channels in the frequency range from0.15to 10 MHz, which closes gaps between the traditional narrowband (up to 500 kHz) and broadband (above1.8 MHz) ranges

Characterization and Emulation of Low-Voltage Power Line Channels for Narrowband and Broadband Communication

The demand for smart grid and smart home applications has raised the recent interest in power line communication (PLC) technologies, and has driven a broad set of deep surveys in low-voltage (LV) power line channels. This book proposes a set of novel approaches, to characterize and to emulate LV power line channels in the frequency range from0.15to 10 MHz, which closes gaps between the traditional narrowband (up to 500 kHz) and broadband (above1.8 MHz) ranges

Estudi bibliomètric any 2014. Campus del Baix Llobregat: EETAC i ESAB

En el present informe s’analitza la producció científica de les dues escoles del Campus del Baix Llobregat, l’Escola d’Enginyeria de Telecomunicació i Aerospacial de Castelldefels (EETAC) i l’Escola Superior d’Agricultura de Barcelona (ESAB) durant el 2014.Postprint (author’s final draft

Characterization and Emulation of Low-Voltage Power Line Channels for Narrowband and Broadband Communication

This thesis proposes a set of novel approaches to characterize and to emulate LV power line channels in the frequency range from 0.15 to 10MHz, which close gaps between the traditional narrowband (up to 500 kHz) and broadband (above 1.8MHz) ranges

Resource Allocation in OFDM-Based Cognitive Two-Way Relay Networks

Cognitive radio (CR), nowadays, is considered as one of the most promising techniques which introduce the flexible usage of radio spectrum and improve the spectral efficiency by enabling unlicensed users to exploit the licensed spectrum in an opportunistic manner. Moreover, the two-way relay communication has attracted a great attention as it introduces a relaying scheme with a bidirectional transmission to exchange information between two nodes. This strategy assumed to improve the overall capacity, since less time slots are needed than the one-way strategy, besides extending the radio coverage range of networks. Another common technique that improves the bandwidth efficiency and spectrum utilization is the orthogonal frequency division multiplexing (OFDM) technique which exhibits a distinctive efficiency in mitigating inter-symbol interference (ISI) and combating frequency selective fading. Therefore, two-way relay CR communication among OFDM terminals can take advantage of these three techniques to boost up the capacity together with the networks quality. In this thesis, an OFDM-based amplify and forward (AF), cognitive two-way multiple-relay network is considered where two transceiver nodes exchange information via relay nodes. The full transmission happens in two time slots. In the first time slot, multiple access phase (MA), the transceiver nodes send their signals to the relay nodes while in the second time slot, broadcast phase (BC), the relay nodes broadcast the received signals to the transceivers. In this dissertation, the problem to jointly optimize the network resources is considered. The first is the transmission power of transceivers and relay nodes to ensure suitable allocated power for best signals transmission besides ensuring no harmful interference is caused to the primary system. The other important resource to be optimized is the subcarrier pairing where the first and second time slots subcarriers have to be matched such that the subcarriers with the best conditions is reserved. The final tuned resource, in this work, is the relay selection where the relay node that assures the best transition of the received signal is selected. The dual decomposition technique is applied to get the optimal resource allocation. Moreover, suboptimal algorithms are proposed to perform the resource allocation reducing, significantly, the computational complexity compared with the optimal solution with small performance degradation. Finally, simulation results of the suggested AF OFDM cognitive relaying network are shown to compare the performance gain of the different algorithms which reveals that the proposed suboptimal algorithm achieves good performance with much less computational complexity than the optimal one

Un cadre inter-couches pour la protection contre les interférences dans les réseaux ad-hoc radio cognitive

A fixed spectrum assignment scheme has a problem with resource deficiency in a wireless network. In 2002, the US Federal Communication Commission (FCC) reported that the radio spectrum was 20% to 85% under-utilized. The insufficient use of the spectrum is a critical issue for radio communication; as communication grows, a fixed spectrum becomes more limiting. The FCC then changed its spectrum management policy to make it more flexible by investigating the cognitive radio (CR) approach. Cognitive radio is a type of intelligent radio that explores the radio frequency environment, learns, and decides to use the unused portion of the frequency. The main functions of a CR are sensing, decision making, and sharing. However, these radios have to respect the standard wireless infrastructures by ensuring the least impact with their devices, also known as primary radios. Coexistence between CR systems and primary systems requires dedicated observation processes and interference management. In this thesis, observation from a CR point of view is presented. The overlapping area between a CR transmitter and primary radio (PR) transmitter is analysed so that it can be taken into account. The impact of this area is learnt by simulation and presented in Chapter 4. As a consequence, potential interference is envisaged. Along with observation, we investigate a proper mechanism to better prevent perturbation on PR devices using the Grey model and Kalman filter as a prediction model for predicting the density of primary receivers. In addition, we provide a strategy to combine the obtained observations into a metric that can be used in routing design in the context of coexistence between Cognitive Radio Networks (CRNs) and primary networks. The proposed strategy, using fuzzy logic, is presented in Chapter 5. In this chapter, we investigate how the routing layer reacts and makes the right decisions to maximise the spectrum resources, while avoiding interference with the primary receivers. For instance, a CR node can operate in an overlap region if primary receivers are inactive within this area. Also, we propose a routing mechanism based on the DYMO routing protocol that takes into account the observed relative impact. In the same chapter, we provide some practical scenarios illustrating the usefulness of our proposal. Interconnecting the CR nodes in CRNs is also a critical problem for the establishment of the network. We therefore present a beacon-based dissemination process in Chapter 6. In this chapter, we also describe a practical device designed for cognitive radio experiments. Even though our work affects different protocol layers, the designed framework is cross-layered. Indeed, the different components of the proposed framework access the various layers to retrieve information, process it, and react accordingly. Thus, our work constitutes a cross-layer framework for a local cognitive radio that aims to minimise the interference and maximise the network resources in cognitive radio networks.Le plan d’attribution du spectre présente un problème de déficit de ressources dans les réseaux sans fil. En 2002, la FCC (Federal Communication Commission) a rapporté que le spectre radioélectrique était de 20% à 85% sous-utilisé. L’utilisation inefficace du spectre est un problème majeur qui doit être résolu si l’on veut que les communications radio se développent. La FCC a ensuite changé la politique de gestion du spectre pour la rendre plus souple en s’interessant à l’approche radio cognitive (CR). La radio cognitive est un type de radio intelligente qui explore l’environnement de fréquences radio, apprend et décide d’utiliser la partie inutilisée du spectre. Les principales fonctions de la CR sont la détection, la prise de décision, et le partage. Cependant, ces radios doivent respecter les infrastructures sans fil standards en minimisant leur impact sur les appareils prioritaires, également appelés systèmes primaires. La coexistence entre les systèmes CR et les systèmes primaires nécessite des processus d’observation et de gestion des interférences dédiés. Dans cette thèse, nous nous sommes intéressés à la phase d’observation du point de vue CR. La zone de chevauchement entre un émetteur CR et l’émetteur primaire (PR) est analysée et prise en compte. L’impact de cette zone est appris par simulation et présenté dans le chapitre 4. En conséquence, des interférences potentielles sont envisagées. Durant la phase d’observation, nous étudions un mécanisme permettant de mieux prévenir la perturbation sur les dispositifs PR en utilisant le Grey Model et le filtre de Kalman comme modèle de prédiction de la densité des récepteurs primaires. En complément à cette observation, nous fournissons une stratégie visant à combiner les observations obtenues en une mesure qui pourra être utilisée par le routage dans le cadre de la coexistence entre réseaux radio cognitive (CRN) et réseaux primaires. La stratégie proposée utilise la logique floue et est présentée dans le chapitre 5. Dans ce chapitre, nous étudions comment la couche réseau réagit et prend les bonnes décisions pour maximiser l’utilisation des ressources du spectre, tout en évitant les interférences avec les récepteurs primaires. Par exemple, un noeud CR peut fonctionner dans une zone de recouvrement, si les récepteurs primaires sont inactifs dans cette zone. Ainsi, nous avons proposé un mécanisme de routage basé sur le protocole de routage DYMO qui prend en compte l’impact relatif observé. Dans ce même chapitre, nous avons également présenté des scénarios pratiques illustrant l’utilité de notre proposition. L’interconnexion des noeuds CR dans le CRN est aussi un problème crucial pour la mise en place du réseau. C’est pourquoi nous présentons un processus de diffusion par balises au chapitre 6. Dans ce chapitre, nous décrivons également un dispositif pratique conçu pour des expériences en radio cognitive. Même si notre travail se rapporte à différentes couches de la pile protocolaire, le cadre général que nous avons conçu est multicouches. En effet, les composants accèdent aux différentes couches pour récupérer l’information, la traiter et réagir en conséquence. Ainsi, notre travail constitue un environnement inter-couches pour un dispositif radio cognitive local visant à minimiser les interférences et à maximiser les ressources réseau dans les réseaux radio cognitive

Low-frequency noise in downscaled silicon transistors: Trends, theory and practice

By the continuing downscaling of sub-micron transistors in the range of few to one deca-nanometers, we focus on the increasing relative level of the low-frequency noise in these devices. Large amount of published data and models are reviewed and summarized, in order to capture the state-of-the-art, and to observe that the 1/area scaling of low-frequency noise holds even for carbon nanotube devices, but the noise becomes too large in order to have fully deterministic devices with area less than 10nm×10nm. The low-frequency noise models are discussed from the point of view that the noise can be both intrinsic and coupled to the charge transport in the devices, which provided a coherent picture, and more interestingly, showed that the models converge each to other, despite the many issues that one can find for the physical origin of each model. Several derivations are made to explain crossovers in noise spectra, variable random telegraph amplitudes, duality between energy and distance of charge traps, behaviors and trends for figures of merit by device downscaling, practical constraints for micropower amplifiers and dependence of phase noise on the harmonics in the oscillation signal, uncertainty and techniques of averaging by noise characterization. We have also shown how the unavoidable statistical variations by fabrication is embedded in the devices as a spatial “frozen noise”, which also follows 1/area scaling law and limits the production yield, from one side, and from other side, the “frozen noise” contributes generically to temporal 1/f noise by randomly probing the embedded variations during device operation, owing to the purely statistical accumulation of variance that follows from cause-consequence principle, and irrespectively of the actual physical process. The accumulation of variance is known as statistics of “innovation variance”, which explains the nearly log-normal distributions in the values for low-frequency noise parameters gathered from different devices, bias and other conditions, thus, the origin of geometric averaging in low-frequency noise characterizations. At present, the many models generally coincide each with other, and what makes the difference, are the values, which, however, scatter prominently in nanodevices. Perhaps, one should make some changes in the approach to the low-frequency noise in electronic devices, to emphasize the “statistics behind the numbers”, because the general physical assumptions in each model always fail at some point by the device downscaling, but irrespectively of that, the statistics works, since the low-frequency noise scales consistently with the 1/area law