Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

A methodical approach to performance measurement experiments : measure and measurement specification

This report describes a methodical approach to performance measurement experiments. This approach gives a blueprint for the whole trajectory from the notion of performance measures and how to define them via planning, instrumentation and execution of the experiments to interpretation of the results. The first stage of the approach, Measurement Initialisation, has been worked out completely. It is shown that a well-defined system description allows a procedural approach to defining performance measures and to identifying parameters that might affect it. For the second stage of the approach, Measurement Planning, concepts are defined that enable a clear experiment description or specification. It is highlighted what actually is being measured when executing an experiment. A brief example that illustrates the value of the method and a comparison with an existing method - that of Jain - complete this report

Design Related Investigations for Media Access Control Protocol Service Schemes in Wavelength Division Multiplexed All Optical Networks

All-optical networks (AON) are emerging through the technological advancement of various optical components, and promise to provide almost unlimited bandwidth. To realise true network utilisation, software solutions are required. An active area of research is media access control (MAC) protocol. This protocol should address the multiple channels by wavelength division mutiplexing (WDM) and bandwidth management. Token-passing (TP) is one such protocol, and is adopted due to its simplicity and collisionless nature. Previously, this protocol has been analysed for a single traffic type. However, such a study may not substantiate the protocol's acceptance in the AON design. As multiple traffic types hog the network through the introduction multimedia services and Internet, the MAC protocol should support this traffic. Four different priority schemes are proposed for TP protocol extension, and classified as static and dynamic schemes. Priority assignments are a priori in static scheme, whereas in the other scheme, priority reassignments are carried out dynamically. Three different versions of dynamic schemes are proposed. The schemes are investigated for performance through analytical modelling and simulations. The semi-Markov process (SMP) modelling approach is extended for the analyses of these cases. In this technique, the behaviour of a typical access node needs to be considered. The analytical results are compared with the simulation results. The deviations of the results are within the acceptable limits, indicating the applicability ofthe model in all-optical environment. It is seen that the static scheme offers higher priority traffic better delay and packet loss performance. Thus, this scheme can be used beneficially in hard real-time systems, where knowledge of priority is a priori. The dynamic priority scheme-l is more suitable for the environments where the lower priority traffic is near real-time traffic and loss sensitive too. For such a scheme, a larger buffer with smaller threshold limits resulted in improved performance. The dynamic scheme-2 and 3 can be employed to offer equal treatment for the different traffic types, and more beneficial in future AONs. These schemes are also compared in their performance to offer constant QoS level. New parameters to facilitate the comparison are proposed. It is observed that the dynamic scheme-l outperforms the other schemes, and these QoS parameters can be used for such QoS analysis. It is concluded that the research can benefit the design of the protocol and its service schemes needed in AON system and its applications

Design and analysis of a 3-dimensional cluster multicomputer architecture using optical interconnection for petaFLOP computing

In this dissertation, the design and analyses of an extremely scalable distributed multicomputer architecture, using optical interconnects, that has the potential to deliver in the order of petaFLOP performance is presented in detail. The design takes advantage of optical technologies, harnessing the features inherent in optics, to produce a 3D stack that implements efficiently a large, fully connected system of nodes forming a true 3D architecture. To adopt optics in large-scale multiprocessor cluster systems, efficient routing and scheduling techniques are needed. To this end, novel self-routing strategies for all-optical packet switched networks and on-line scheduling methods that can result in collision free communication and achieve real time operation in high-speed multiprocessor systems are proposed. The system is designed to allow failed/faulty nodes to stay in place without appreciable performance degradation. The approach is to develop a dynamic communication environment that will be able to effectively adapt and evolve with a high density of missing units or nodes. A joint CPU/bandwidth controller that maximizes the resource allocation in this dynamic computing environment is introduced with an objective to optimize the distributed cluster architecture, preventing performance/system degradation in the presence of failed/faulty nodes. A thorough analysis, feasibility study and description of the characteristics of a 3-Dimensional multicomputer system capable of achieving 100 teraFLOP performance is discussed in detail. Included in this dissertation is throughput analysis of the routing schemes, using methods from discrete-time queuing systems and computer simulation results for the different proposed algorithms. A prototype of the 3D architecture proposed is built and a test bed developed to obtain experimental results to further prove the feasibility of the design, validate initial assumptions, algorithms, simulations and the optimized distributed resource allocation scheme. Finally, as a prelude to further research, an efficient data routing strategy for highly scalable distributed mobile multiprocessor networks is introduced

Implications of Implementing HDTV Over Digital Subscriber Line Networks

This thesis addresses the different challenges a telecommunications company would face when trying to implement an HDTV video service over a Digital Subscriber Line (DSL) connection. Each challenge is discussed in detail and a technology, protocol, or method is suggested to overcome that particular challenge. One of the biggest challenges is creating a network architecture that can provide enough bandwidth to support video over a network that was originally designed for voice traffic. The majority of the network connections to a customer premises in a telephony network consists of a copper pair. This type of connection is not optimal for high bandwidth services. This limitation can be overcome using Gigabit Ethernet (GE) over fiber in the core part of the network and VDSL2 in the access part of the network. For the purposes of this document, the core portion of the network is considered to be an area equal to several counties or approximately 50 miles in radius. The core network starts at the primary central office (CO) and spreads out to central offices in suburbs and small towns. The primary central office is a central point in the telecom operator\u27s network. Large trunks are propagated from the primary central office to smaller central offices making up the core network. The access portion of the network is considered to be an area within a suburb or small town from the central office to a subscriber\u27s home. Appendix A, located on page 60, contains a network diagram illustrating the scope of each of the different portions of the network. Considerations must also be given for the internal network to the residence such as category 5 (Cat5) cable or higher grade and network equipment that can provide up to 30 Megabits per second (Mbps) connections or throughput. The equipment in the telecommunications network also plays a part in meeting the challenge of 30 Mbps bandwidth. GE switches should be used with single mode fiber optic cable in the core part of the network. Digital Subscriber Line Access Multiplexers (DSLAM) with the capability to filter Internet Group Management Protocol (IGMP) messages should be used in the access part of the network to facilitate bandwidth utilization. Placement of this equipment and how the data is aggregated is another issue to consider when implementing HDTV service. Another major challenge facing the implementation of HDTV over DSL networks is controlling quality of service (QoS) throughout the network. Class of Service (CoS) and Differentiated Services (DiffServ) is a method of QoS that would enable video packets to have a higher priority and less delay than other data packets. The consumer could have data, video, and voice traffic all over the same DSL connection. Data, video and voice packets would need to have a different priority in order to maintain appropriate QoS levels for each service. The use of advanced technology in video encoding will be essential to the success of the video service. MPEG-2, MPEG-4, and Windows Media 9 are just a few of the video encoding technologies that could be used to reduce the necessary bandwidth for HDTV. The advancement of this technology is essential to allow telecommunications providers to offer HDTV. Another challenge for the telecom operator concerns the security of the network and service after implementation. Theft of service will be another area that the telecomm operator will be forced to resolve. The cable operators currently face this issue and lose millions of dollars in revenue. Authentication, IP filtering and MAC address blocking are a few possible solutions to this problem

DSL-based triple-play services

This research examines the triple play service based on the ADSL technology. The voice over IP will be checked and combined with the internet data by two monitoring programs in order to examine the performance that this service offers and then will be compared with the usual method of internet connection.This research examines the triple play service based on the ADSL technology. The voice over IP will be checked and combined with the internet data by two monitoring programs in order to examine the performance that this service offers and then will be compared with the usual method of internet connection.

IP-based virtual private networks and proportional quality of service differentiation

IP-based virtual private networks (VPNs) have the potential of delivering cost-effective, secure, and private network-like services. Having surveyed current enabling techniques, an overall picture of IP VPN implementations is presented. In order to provision the equivalent quality of service (QoS) of legacy connection-oriented layer 2 VPNs (e.g., Frame Relay and ATM), IP VPNs have to overcome the intrinsically best effort characteristics of the Internet. Subsequently, a hierarchical QoS guarantee framework for IP VPNs is proposed, stitching together development progresses from recent research and engineering work. To differentiate IP VPN QoS, the proportional QoS differentiation model, whose QoS specification granularity compromises that of IntServ and Diffserv, emerges as a potential solution. The investigation of its claimed capability of providing the predictable and controllable QoS differentiation is then conducted. With respect to the loss rate differentiation, the packet shortage phenomenon shown in two classical proportional loss rate (PLR) dropping schemes is studied. On the pursuit of a feasible solution, the potential of compromising the system resource, that is, the buffer, is ruled out; instead, an enhanced debt-aware mechanism is suggested to relieve the negative effects of packet shortage. Simulation results show that debt-aware partially curbs the biased loss rate ratios, and improves the queueing delay performance as well. With respect to the delay differentiation, the dynamic behavior of the average delay difference between successive classes is first analyzed, aiming to gain insights of system dynamics. Then, two classical delay differentiation mechanisms, that is,proportional average delay (PAD) and waiting time priority (WTP), are simulated and discussed. Based on observations on their differentiation performances over both short and long time periods, a combined delay differentiation (CDD) scheme is introduced. Simulations are utilized to validate this method. Both loss and delay differentiations are based on a series of differentiation parameters. Though previous work on the selection of delay differentiation parameters has been presented, that of loss differentiation parameters mostly relied on network operators\u27 experience. A quantitative guideline, based on the principles of queueing and optimization, is then proposed to compute loss differentiation parameters. Aside from analysis, the new approach is substantiated by numerical results

Simulation and analytical performance studies of generic atm switch fabrics.

As technology improves exciting new services such as video phone become possible and economically viable but their deployment is hampered by the inability of the present networks to carry them. The long term vision is to have a single network able to carry all present and future services. Asynchronous Transfer Mode, ATM, is the versatile new packet -based switching and multiplexing technique proposed for the single network. Interest in ATM is currently high as both industrial and academic institutions strive to understand more about the technique. Using both simulation and analysis, this research has investigated how the performance of ATM switches is affected by architectural variations in the switch fabric design and how the stochastic nature of ATM affects the timing of constant bit rate services. As a result the research has contributed new ATM switch performance data, a general purpose ATM switch simulator and analytic models that further research may utilise and has uncovered a significant timing problem of the ATM technique. The thesis will also be of interest and assistance to anyone planning on using simulation as a research tool to model an ATM switch

IP and ATM integration: A New paradigm in multi-service internetworking

ATM is a widespread technology adopted by many to support advanced data communication, in particular efficient Internet services provision. The expected challenges of multimedia communication together with the increasing massive utilization of IP-based applications urgently require redesign of networking solutions in terms of both new functionalities and enhanced performance. However, the networking context is affected by so many changes, and to some extent chaotic growth, that any approach based on a structured and complex top-down architecture is unlikely to be applicable. Instead, an approach based on finding out the best match between realistic service requirements and the pragmatic, intelligent use of technical opportunities made available by the product market seems more appropriate. By following this approach, innovations and improvements can be introduced at different times, not necessarily complying with each other according to a coherent overall design. With the aim of pursuing feasible innovations in the different networking aspects, we look at both IP and ATM internetworking in order to investigating a few of the most crucial topics/ issues related to the IP and ATM integration perspective. This research would also address various means of internetworking the Internet Protocol (IP) and Asynchronous Transfer Mode (ATM) with an objective of identifying the best possible means of delivering Quality of Service (QoS) requirements for multi-service applications, exploiting the meritorious features that IP and ATM have to offer. Although IP and ATM often have been viewed as competitors, their complementary strengths and limitations from a natural alliance that combines the best aspects of both the technologies. For instance, one limitation of ATM networks has been the relatively large gap between the speed of the network paths and the control operations needed to configure those data paths to meet changing user needs. IP\u27s greatest strength, on the other hand, is the inherent flexibility and its capacity to adapt rapidly to changing conditions. These complementary strengths and limitations make it natural to combine IP with ATM to obtain the best that each has to offer. Over time many models and architectures have evolved for IP/ATM internetworking and they have impacted the fundamental thinking in internetworking IP and ATM. These technologies, architectures, models and implementations will be reviewed in greater detail in addressing possible issues in integrating these architectures s in a multi-service, enterprise network. The objective being to make recommendations as to the best means of interworking the two in exploiting the salient features of one another to provide a faster, reliable, scalable, robust, QoS aware network in the most economical manner. How IP will be carried over ATM when a commercial worldwide ATM network is deployed is not addressed and the details of such a network still remain in a state of flux to specify anything concrete. Our research findings culminated with a strong recommendation that the best model to adopt, in light of the impending integrated service requirements of future multi-service environments, is an ATM core with IP at the edges to realize the best of both technologies in delivering QoS guarantees in a seamless manner to any node in the enterprise