5G-MEC Testbeds for V2X Applications

Fifth-generation (5G) mobile networks fulfill the demands of critical applications, such as Ultra-Reliable Low-Latency Communication (URLLC), particularly in the automotive industry. Vehicular communication requires low latency and high computational capabilities at the network’s edge. To meet these requirements, ETSI standardized Multi-access Edge Computing (MEC), which provides cloud computing capabilities and addresses the need for low latency. This paper presents a generalized overview for implementing a 5G-MEC testbed for Vehicle-to-Everything (V2X) applications, as well as the analysis of some important testbeds and state-of-the-art implementations based on their deployment scenario, 5G use cases, and open source accessibility. The complexity of using the testbeds is also discussed, and the challenges researchers may face while replicating and deploying them are highlighted. Finally, the paper summarizes the tools used to build the testbeds and addresses open issues related to implementing the testbeds.publishedVersio

NFV orchestration in edge and fog scenarios

Mención Internacional en el título de doctorLas infraestructuras de red actuales soportan una variedad diversa de servicios como video bajo demanda, video conferencias, redes sociales, sistemas de educación, o servicios de almacenamiento de fotografías. Gran parte de la población mundial ha comenzado a utilizar estos servicios, y los utilizan diariamente. Proveedores de Cloud y operadores de infraestructuras de red albergan el tráfico de red generado por estos servicios, y sus tareas de gestión no solo implican realizar el enrutamiento del tráfico, sino también el procesado del tráfico de servicios de red. Tradicionalmente, el procesado del tráfico ha sido realizado mediante aplicaciones/ programas desplegados en servidores que estaban dedicados en exclusiva a tareas concretas como la inspección de paquetes. Sin embargo, en los últimos anos los servicios de red se han virtualizado y esto ha dado lugar al paradigma de virtualización de funciones de red (Network Function Virtualization (NFV) siguiendo las siglas en ingles), en el que las funciones de red de un servicio se ejecutan en contenedores o máquinas virtuales desacopladas de la infraestructura hardware. Como resultado, el procesado de tráfico se ha ido haciendo más flexible gracias al laxo acople del software y hardware, y a la posibilidad de compartir funciones de red típicas, como firewalls, entre los distintos servicios de red. NFV facilita la automatización de operaciones de red, ya que tareas como el escalado, o la migración son típicamente llevadas a cabo mediante un conjunto de comandos previamente definidos por la tecnología de virtualización pertinente, bien mediante contenedores o máquinas virtuales. De todos modos, sigue siendo necesario decidir el en rutamiento y procesado del tráfico de cada servicio de red. En otras palabras, que servidores tienen que encargarse del procesado del tráfico, y que enlaces de la red tienen que utilizarse para que las peticiones de los usuarios lleguen a los servidores finales, es decir, el conocido como embedding problem. Bajo el paraguas del paradigma NFV, a este problema se le conoce en inglés como Virtual Network Embedding (VNE), y esta tesis utiliza el termino “NFV orchestration algorithm” para referirse a los algoritmos que resuelven este problema. El problema del VNE es NP-hard, lo cual significa que que es imposible encontrar una solución optima en un tiempo polinómico, independientemente del tamaño de la red. Como consecuencia, la comunidad investigadora y de telecomunicaciones utilizan heurísticos que encuentran soluciones de manera más rápida que productos para la resolución de problemas de optimización. Tradicionalmente, los “NFV orchestration algorithms” han intentado minimizar los costes de despliegue derivados de las soluciones asociadas. Por ejemplo, estos algoritmos intentan no consumir el ancho de banda de la red, y usar rutas cortas para no utilizar tantos recursos. Además, una tendencia reciente ha llevado a la comunidad investigadora a utilizar algoritmos que minimizan el consumo energético de los servicios desplegados, bien mediante la elección de dispositivos con un consumo energético más eficiente, o mediante el apagado de dispositivos de red en desuso. Típicamente, las restricciones de los problemas de VNE se han resumido en un conjunto de restricciones asociadas al uso de recursos y consumo energético, y las soluciones se diferenciaban por la función objetivo utilizada. Pero eso era antes de la 5a generación de redes móviles (5G) se considerase en el problema de VNE. Con la aparición del 5G, nuevos servicios de red y casos de uso entraron en escena. Los estándares hablaban de comunicaciones ultra rápidas y fiables (Ultra-Reliable and Low Latency Communications (URLLC) usando las siglas en inglés) con latencias por debajo de unos pocos milisegundos y fiabilidades del 99.999%, una banda ancha mejorada (enhanced Mobile Broadband (eMBB) usando las siglas en inglés) con notorios incrementos en el flujo de datos, e incluso la consideración de comunicaciones masivas entre maquinas (Massive Machine-Type Communications (mMTC) usando las siglas en inglés) entre dispositivos IoT. Es más, paradigmas como edge y fog computing se incorporaron a la tecnología 5G, e introducían la idea de tener dispositivos de computo más cercanos al usuario final. Como resultado, el problema del VNE tenía que incorporar los nuevos requisitos como restricciones a tener en cuenta, y toda solución debía satisfacer bajas latencias, alta fiabilidad, y mayores tasas de transmisión. Esta tesis estudia el problema des VNE, y propone algunos heurísticos que lidian con las restricciones asociadas a servicios 5G en escenarios edge y fog, es decir, las soluciones propuestas se encargan de asignar funciones virtuales de red a servidores, y deciden el enrutamiento del trafico en las infraestructuras 5G con dispositivos edge y fog. Para evaluar el rendimiento de las soluciones propuestas, esta tesis estudia en primer lugar la generación de grafos que representan redes 5G. Los mecanismos propuestos para la generación de grafos sirven para representar distintos escenarios 5G. En particular, escenarios de federación en los que varios dominios comparten recursos entre ellos. Los grafos generados también representan servidores en el edge, así como dispositivos fog con una batería limitada. Además, estos grafos tienen en cuenta los requisitos de estándares, y la demanda que se espera en las redes 5G. La generación de grafos propuesta sirve para representar escenarios federación en los que varios dominios comparten recursos entre ellos, y redes 5G con servidores edge, así como dispositivos fog estáticos o móviles con una batería limitada. Los grafos generados para infraestructuras 5G tienen en cuenta los requisitos de estándares, y la demanda de red que se espera en las redes 5G. Además, los grafos son diferentes en función de la densidad de población, y el área de estudio, es decir, si es una zona industrial, una autopista, o una zona urbana. Tras detallar la generación de grafos que representan redes 5G, esta tesis propone algoritmos de orquestación NFV para resolver con el problema del VNE. Primero, se centra en escenarios federados en los que los servicios de red se tienen que asignar no solo a la infraestructura de un dominio, sino a los recursos compartidos en la federación de dominios. Dos problemas diferentes han sido estudiados, uno es el problema del VNE propiamente dicho sobre una infraestructura federada, y el otro es la delegación de servicios de red. Es decir, si un servicio de red se debe desplegar localmente en un dominio, o en los recursos compartidos por la federación de dominios; a sabiendas de que el último caso supone el pago de cuotas por parte del dominio local a cambio del despliegue del servicio de red. En segundo lugar, esta tesis propone OKpi, un algoritmo de orquestación NFV para conseguir la calidad de servicio de las distintas slices de las redes 5G. Conceptualmente, el slicing consiste en partir la red de modo que cada servicio de red sea tratado de modo diferente dependiendo del trozo al que pertenezca. Por ejemplo, una slice de eHealth reservara los recursos de red necesarios para conseguir bajas latencias en servicios como operaciones quirúrgicas realizadas de manera remota. Cada trozo (slice) está destinado a unos servicios específicos con unos requisitos muy concretos, como alta fiabilidad, restricciones de localización, o latencias de un milisegundo. OKpi es un algoritmo de orquestación NFV que consigue satisfacer los requisitos de servicios de red en los distintos trozos, o slices de la red. Tras presentar OKpi, la tesis resuelve el problema del VNE en redes 5G con dispositivos fog estáticos y móviles. El algoritmo de orquestación NFV presentado tiene en cuenta las limitaciones de recursos de computo de los dispositivos fog, además de los problemas de falta de cobertura derivados de la movilidad de los dispositivos. Para concluir, esta tesis estudia el escalado de servicios vehiculares Vehicle-to-Network (V2N), que requieren de bajas latencias para servicios como la prevención de choques, avisos de posibles riesgos, y conducción remota. Para estos servicios, los atascos y congestiones en la carretera pueden causar el incumplimiento de los requisitos de latencia. Por tanto, es necesario anticiparse a esas circunstancias usando técnicas de series temporales que permiten saber el tráfico inminente en los siguientes minutos u horas, para así poder escalar el servicio V2N adecuadamente.Current network infrastructures handle a diverse range of network services such as video on demand services, video-conferences, social networks, educational systems, or photo storage services. These services have been embraced by a significant amount of the world population, and are used on a daily basis. Cloud providers and Network operators’ infrastructures accommodate the traffic rates that the aforementioned services generate, and their management tasks do not only involve the traffic steering, but also the processing of the network services’ traffic. Traditionally, the traffic processing has been assessed via applications/programs deployed on servers that were exclusively dedicated to a specific task as packet inspection. However, in recent years network services have stated to be virtualized and this has led to the Network Function Virtualization (Network Function Virtualization (NFV)) paradigm, in which the network functions of a service run on containers or virtual machines that are decoupled from the hardware infrastructure. As a result, the traffic processing has become more flexible because of the loose coupling between software and hardware, and the possibility of sharing common network functions, as firewalls, across multiple network services. NFV eases the automation of network operations, since scaling and migrations tasks are typically performed by a set of commands predefined by the virtualization technology, either containers or virtual machines. However, it is still necessary to decide the traffic steering and processing of every network service. In other words, which servers will hold the traffic processing, and which are the network links to be traversed so the users’ requests reach the final servers, i.e., the network embedding problem. Under the umbrella of NFV, this problem is known as Virtual Network Embedding (VNE), and this thesis refers as “NFV orchestration algorithms” to those algorithms solving such a problem. The VNE problem is a NP-hard, meaning that it is impossible to find optimal solutions in polynomial time, no matter the network size. As a consequence, the research and telecommunications community rely on heuristics that find solutions quicker than a commodity optimization solver. Traditionally, NFV orchestration algorithms have tried to minimize the deployment costs derived from their solutions. For example, they try to not exhaust the network bandwidth, and use short paths to use less network resources. Additionally, a recent tendency led the research community towards algorithms that minimize the energy consumption of the deployed services, either by selecting more energy efficient devices or by turning off those network devices that remained unused. VNE problem constraints were typically summarized in a set of resources/energy constraints, and the solutions differed on which objectives functions were aimed for. But that was before 5th generation of mobile networks (5G) were considered in the VNE problem. With the appearance of 5G, new network services and use cases started to emerge. The standards talked about Ultra Reliable Low Latency Communication (Ultra-Reliable and Low Latency Communications (URLLC)) with latencies below few milliseconds and 99.999% reliability, an enhanced mobile broadband (enhanced Mobile Broadband (eMBB)) with significant data rate increases, and even the consideration of massive machine-type communications (Massive Machine-Type Communications (mMTC)) among Internet of Things (IoT) devices. Moreover, paradigms such as edge and fog computing blended with the 5G technology to introduce the idea of having computing devices closer to the end users. As a result, the VNE problem had to incorporate the new requirements as constraints to be taken into account, and every solution should either satisfy low latencies, high reliability, or larger data rates. This thesis studies the VNE problem, and proposes some heuristics tackling the constraints related to 5G services in Edge and fog scenarios, that is, the proposed solutions assess the assignment of Virtual Network Functions to resources, and the traffic steering across 5G infrastructures that have Edge and Fog devices. To evaluate the performance of the proposed solutions, the thesis studies first the generation of graphs that represent 5G networks. The proposed mechanisms to generate graphs serve to represent diverse 5G scenarios. In particular federation scenarios in which several domains share resources among themselves. The generated graphs also represent edge servers, so as fog devices with limited battery capacity. Additionally, these graphs take into account the standard requirements, and the expected demand for 5G networks. Moreover, the graphs differ depending on the density of population, and the area of study, i.e., whether it is an industrial area, a highway, or an urban area. After detailing the generation of graphs representing the 5G networks, this thesis proposes several NFV orchestration algorithms to tackle the VNE problem. First, it focuses on federation scenarios in which network services should be assigned not only to a single domain infrastructure, but also to the shared resources of the federation of domains. Two different problems are studied, one being the VNE itself over a federated infrastructure, and the other the delegation of network services. That is, whether a network service should be deployed in a local domain, or in the pool of resources of the federation domain; knowing that the latter charges the local domain for hosting the network service. Second, the thesis proposes OKpi, a NFV orchestration algorithm to meet 5G network slices quality of service. Conceptually, network slicing consists in splitting the network so network services are treated differently based on the slice they belong to. For example, an eHealth network slice will allocate the network resources necessary to meet low latencies for network services such as remote surgery. Each network slice is devoted to specific services with very concrete requirements, as high reliability, location constraints, or 1ms latencies. OKpi is a NFV orchestration algorithm that meets the network service requirements among different slices. It is based on a multi-constrained shortest path heuristic, and its solutions satisfy latency, reliability, and location constraints. After presenting OKpi, the thesis tackles the VNE problem in 5G networks with static/moving fog devices. The presented NFV orchestration algorithm takes into account the limited computing resources of fog devices, as well as the out-of-coverage problems derived from the devices’ mobility. To conclude, this thesis studies the scaling of Vehicle-to-Network (V2N) services, which require low latencies for network services as collision avoidance, hazard warning, and remote driving. For these services, the presence of traffic jams, or high vehicular traffic congestion lead to the violation of latency requirements. Hence, it is necessary to anticipate to such circumstances by using time-series techniques that allow to derive the incoming vehicular traffic flow in the next minutes or hours, so as to scale the V2N service accordingly.The 5G Exchange (5GEx) project (2015-2018) was an EU-funded project (H2020-ICT-2014-2 grant agreement 671636). The 5G-TRANSFORMER project (2017-2019) is an EU-funded project (H2020-ICT-2016-2 grant agreement 761536). The 5G-CORAL project (2017-2019) is an EU-Taiwan project (H2020-ICT-2016-2 grant agreement 761586).Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Ioannis Stavrakakis.- Secretario: Pablo Serrano Yáñez-Mingot.- Vocal: Paul Horatiu Patra

Automotive Intelligence Embedded in Electric Connected Autonomous and Shared Vehicles Technology for Sustainable Green Mobility

The automotive sector digitalization accelerates the technology convergence of perception, computing processing, connectivity, propulsion, and data fusion for electric connected autonomous and shared (ECAS) vehicles. This brings cutting-edge computing paradigms with embedded cognitive capabilities into vehicle domains and data infrastructure to provide holistic intrinsic and extrinsic intelligence for new mobility applications. Digital technologies are a significant enabler in achieving the sustainability goals of the green transformation of the mobility and transportation sectors. Innovation occurs predominantly in ECAS vehicles’ architecture, operations, intelligent functions, and automotive digital infrastructure. The traditional ownership model is moving toward multimodal and shared mobility services. The ECAS vehicle’s technology allows for the development of virtual automotive functions that run on shared hardware platforms with data unlocking value, and for introducing new, shared computing-based automotive features. Facilitating vehicle automation, vehicle electrification, vehicle-to-everything (V2X) communication is accomplished by the convergence of artificial intelligence (AI), cellular/wireless connectivity, edge computing, the Internet of things (IoT), the Internet of intelligent things (IoIT), digital twins (DTs), virtual/augmented reality (VR/AR) and distributed ledger technologies (DLTs). Vehicles become more intelligent, connected, functioning as edge micro servers on wheels, powered by sensors/actuators, hardware (HW), software (SW) and smart virtual functions that are integrated into the digital infrastructure. Electrification, automation, connectivity, digitalization, decarbonization, decentralization, and standardization are the main drivers that unlock intelligent vehicles' potential for sustainable green mobility applications. ECAS vehicles act as autonomous agents using swarm intelligence to communicate and exchange information, either directly or indirectly, with each other and the infrastructure, accessing independent services such as energy, high-definition maps, routes, infrastructure information, traffic lights, tolls, parking (micropayments), and finding emergent/intelligent solutions. The article gives an overview of the advances in AI technologies and applications to realize intelligent functions and optimize vehicle performance, control, and decision-making for future ECAS vehicles to support the acceleration of deployment in various mobility scenarios. ECAS vehicles, systems, sub-systems, and components are subjected to stringent regulatory frameworks, which set rigorous requirements for autonomous vehicles. An in-depth assessment of existing standards, regulations, and laws, including a thorough gap analysis, is required. Global guidelines must be provided on how to fulfill the requirements. ECAS vehicle technology trustworthiness, including AI-based HW/SW and algorithms, is necessary for developing ECAS systems across the entire automotive ecosystem. The safety and transparency of AI-based technology and the explainability of the purpose, use, benefits, and limitations of AI systems are critical for fulfilling trustworthiness requirements. The article presents ECAS vehicles’ evolution toward domain controller, zonal vehicle, and federated vehicle/edge/cloud-centric based on distributed intelligence in the vehicle and infrastructure level architectures and the role of AI techniques and methods to implement the different autonomous driving and optimization functions for sustainable green mobility.publishedVersio

Low-power wide-area networks : design goals, architecture, suitability to use cases and research challenges

Previous survey articles on Low-Powered Wide-Area Networks (LPWANs) lack a systematic analysis of the design goals of LPWAN and the design decisions adopted by various commercially available and emerging LPWAN technologies, and no study has analysed how their design decisions impact their ability to meet design goals. Assessing a technology's ability to meet design goals is essential in determining suitable technologies for a given application. To address these gaps, we have analysed six prominent design goals and identified the design decisions used to meet each goal in the eight LPWAN technologies, ranging from technical consideration to business model, and determined which specific technique in a design decision will help meet each goal to the greatest extent. System architecture and specifications are presented for those LPWAN solutions, and their ability to meet each design goal is evaluated. We outline seventeen use cases across twelve domains that require large low power network infrastructure and prioritise each design goal's importance to those applications as Low, Moderate, or High. Using these priorities and each technology's suitability for meeting design goals, we suggest appropriate LPWAN technologies for each use case. Finally, a number of research challenges are presented for current and future technologies. © 2013 IEEE

A Cognitive Routing framework for Self-Organised Knowledge Defined Networks

This study investigates the applicability of machine learning methods to the routing protocols for achieving rapid convergence in self-organized knowledge-defined networks. The research explores the constituents of the Self-Organized Networking (SON) paradigm for 5G and beyond, aiming to design a routing protocol that complies with the SON requirements. Further, it also exploits a contemporary discipline called Knowledge-Defined Networking (KDN) to extend the routing capability by calculating the “Most Reliable” path than the shortest one. The research identifies the potential key areas and possible techniques to meet the objectives by surveying the state-of-the-art of the relevant fields, such as QoS aware routing, Hybrid SDN architectures, intelligent routing models, and service migration techniques. The design phase focuses primarily on the mathematical modelling of the routing problem and approaches the solution by optimizing at the structural level. The work contributes Stochastic Temporal Edge Normalization (STEN) technique which fuses link and node utilization for cost calculation; MRoute, a hybrid routing algorithm for SDN that leverages STEN to provide constant-time convergence; Most Reliable Route First (MRRF) that uses a Recurrent Neural Network (RNN) to approximate route-reliability as the metric of MRRF. Additionally, the research outcomes include a cross-platform SDN Integration framework (SDN-SIM) and a secure migration technique for containerized services in a Multi-access Edge Computing environment using Distributed Ledger Technology. The research work now eyes the development of 6G standards and its compliance with Industry-5.0 for enhancing the abilities of the present outcomes in the light of Deep Reinforcement Learning and Quantum Computing

MAVEN Deliverable 7.2: Impact Assessment - Technical Report

This deliverable focuses on an important topic within the MAVEN project - evaluation of the project impact. This is an important step that will allow us to say what the results and impact of the different technologies, functionalities as well as assumptions are. It covers different dimensions of the impact assessment as stated in the Deliverable D7.1 - Impact assessment plan [10]. The field tests proved that the technology in the vehicle works together with the infrastructure and the solution is technically feasible. This was demonstrated also during particular events and is reported in the attached test protocols. At the same time, the emulation and simulation in Dominion software proved the functionality, for example with respect to the cooperative perception or safety indicators. The tests also proved that the key performance indicator "minimum time to the collision" decreases when applying the cooperative sensing. Also, the number of human interventions needed was zero in all the tests. This deliverable also discussed selected results of a detailed user survey aiming at understanding the expected impacts and transition of automated vehicles. The overall number of respondents reached 209. The responses have revealed some interesting facts. For example, over 80% of the respondents believe that CAVs will decrease the number of traffic accidents. Similarly, about 70% of the respondents expect improvements in traffic congestions. Over 82% of respondents declared that they would accept some detour when driving if it helps the overall traffic situation. The literature review, however, indicated that autonomous vehicles will have either a positive or a negative effect on the environment, depending on the policies. For example, opening cars as a mode of transport to new user groups (seniors, children etc.) together with improvements of the traffic, flow parameters can increase the traffic volume on roads. Policy makers shall focus on the integration of the CAVs into a broader policy concept including car or ride-sharing, electromobility and others. In order to evaluate the transition, for example, the influence of different penetration rates of CAVs on the performance, a microscopic traffic simulation was performed. Here the particular MAVEN use cases, as well as their combination, was addressed. The results of the simulation are rather promising. The potential for improvements in traffic performance is clearly there. It was demonstrated that a proper integration of CAVs into city traffic management can, for example, help with respect to the environmental goals (Climate Action of the European Commission) and reduce CO2 emissions by up to 12 % (a combination of GLOSA and signal optimization). On corridors with a green wave, a capacity increase of up to 34% was achieved. The conclusions from this project can be used not only by other researchers but mainly by traffic managers and decision-makers in cities. The findings can get a better idea about the real impacts of particular use cases (such as green wave, GLOSA and others) in the cities. An important added value is also the focus on the transition phase. It was demonstrated that already for lower penetration rates (even 20% penetration of automated vehicles), there are significant improvements in traffic performance. For example, the platooning leads to a decrease of CO2 emissions of 2,6% or the impact indicator by 17,7%

Towards edge robotics: the progress from cloud-based robotic systems to intelligent and context-aware robotic services

Current robotic systems handle a different range of applications such as video surveillance, delivery of goods, cleaning, material handling, assembly, painting, or pick and place services. These systems have been embraced not only by the general population but also by the vertical industries to help them in performing daily activities. Traditionally, the robotic systems have been deployed in standalone robots that were exclusively dedicated to performing a specific task such as cleaning the floor in indoor environments. In recent years, cloud providers started to offer their infrastructures to robotic systems for offloading some of the robot’s functions. This ultimate form of the distributed robotic system was first introduced 10 years ago as cloud robotics and nowadays a lot of robotic solutions are appearing in this form. As a result, standalone robots became software-enhanced objects with increased reconfigurability as well as decreased complexity and cost. Moreover, by offloading the heavy processing from the robot to the cloud, it is easier to share services and information from various robots or agents to achieve better cooperation and coordination. Cloud robotics is suitable for human-scale responsive and delay-tolerant robotic functionalities (e.g., monitoring, predictive maintenance). However, there is a whole set of real-time robotic applications (e.g., remote control, motion planning, autonomous navigation) that can not be executed with cloud robotics solutions, mainly because cloud facilities traditionally reside far away from the robots. While the cloud providers can ensure certain performance in their infrastructure, very little can be ensured in the network between the robots and the cloud, especially in the last hop where wireless radio access networks are involved. Over the last years advances in edge computing, fog computing, 5G NR, network slicing, Network Function Virtualization (NFV), and network orchestration are stimulating the interest of the industrial sector to satisfy the stringent and real-time requirements of their applications. Robotic systems are a key piece in the industrial digital transformation and their benefits are very well studied in the literature. However, designing and implementing a robotic system that integrates all the emerging technologies and meets the connectivity requirements (e.g., latency, reliability) is an ambitious task. This thesis studies the integration of modern Information andCommunication Technologies (ICTs) in robotic systems and proposes some robotic enhancements that tackle the real-time constraints of robotic services. To evaluate the performance of the proposed enhancements, this thesis departs from the design and prototype implementation of an edge native robotic system that embodies the concepts of edge computing, fog computing, orchestration, and virtualization. The proposed edge robotics system serves to represent two exemplary robotic applications. In particular, autonomous navigation of mobile robots and remote-control of robot manipulator where the end-to-end robotic system is distributed between the robots and the edge server. The open-source prototype implementation of the designed edge native robotic system resulted in the creation of two real-world testbeds that are used in this thesis as a baseline scenario for the evaluation of new innovative solutions in robotic systems. After detailing the design and prototype implementation of the end-to-end edge native robotic system, this thesis proposes several enhancements that can be offered to robotic systems by adapting the concept of edge computing via the Multi-Access Edge Computing (MEC) framework. First, it proposes exemplary network context-aware enhancements in which the real-time information about robot connectivity and location can be used to dynamically adapt the end-to-end system behavior to the actual status of the communication (e.g., radio channel). Three different exemplary context-aware enhancements are proposed that aim to optimize the end-to-end edge native robotic system. Later, the thesis studies the capability of the edge native robotic system to offer potential savings by means of computation offloading for robot manipulators in different deployment configurations. Further, the impact of different wireless channels (e.g., 5G, 4G andWi-Fi) to support the data exchange between a robot manipulator and its remote controller are assessed. In the following part of the thesis, the focus is set on how orchestration solutions can support mobile robot systems to make high quality decisions. The application of OKpi as an orchestration algorithm and DLT-based federation are studied to meet the KPIs that autonomously controlledmobile robots have in order to provide uninterrupted connectivity over the radio access network. The elaborated solutions present high compatibility with the designed edge robotics system where the robot driving range is extended without any interruption of the end-to-end edge robotics service. While the DLT-based federation extends the robot driving range by deploying access point extension on top of external domain infrastructure, OKpi selects the most suitable access point and computing resource in the cloud-to-thing continuum in order to fulfill the latency requirements of autonomously controlled mobile robots. To conclude the thesis the focus is set on how robotic systems can improve their performance by leveraging Artificial Intelligence (AI) and Machine Learning (ML) algorithms to generate smart decisions. To do so, the edge native robotic system is presented as a true embodiment of a Cyber-Physical System (CPS) in Industry 4.0, showing the mission of AI in such concept. It presents the key enabling technologies of the edge robotic system such as edge, fog, and 5G, where the physical processes are integrated with computing and network domains. The role of AI in each technology domain is identified by analyzing a set of AI agents at the application and infrastructure level. In the last part of the thesis, the movement prediction is selected to study the feasibility of applying a forecast-based recovery mechanism for real-time remote control of robotic manipulators (FoReCo) that uses ML to infer lost commands caused by interference in the wireless channel. The obtained results are showcasing the its potential in simulation and real-world experimentation.Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Karl Holger.- Secretario: Joerg Widmer.- Vocal: Claudio Cicconett

Cooperative Situation Awareness in Transportation

Intelligent Transportation Systems (ITS) became a fast moving eld of research in the last decades, in particular in the context of continuously growing mobility and a high employment of resources starting from energy and material consumption to travel time and nally the human life. As it has already been experienced in other application areas, the introduction of communications technology is able to bring a revolutionary change in structures and behaviors long-believed to be carved in stone. The main idea behind this thesis is the usage of information not as a mere placeholder, e.g. a eld in a static message, but actively utilizing its content and dependencies. This requires an estimation of the actual worth of a single piece of information for the entity itself and the entities which are in communication range. This worth has to be the essential driver for the cooperative situation estimation. The active utilization of information and its cooperative dissemination provides the entities the opportunity to become situation aware and detect hazardous or inefficient situations early in advance. Since information always has a degree of uncertainty which is inherent to information in the real-world problem domain, as we are confronted with in ITS, probabilistic methods will be applied to model situation-relevant information. Conditional probability distributions in state transition models make for the evolvement of the situational information with the progress of time and handle causal dependencies between situational information. Together with a utility-based decision-making process dynamic probabilistic causal decision networks provide the functionality to select optimal actions given sequences of inaccurate and incomplete evidences. This thesis provides concepts and strategies that push forward the exploitation of information in a cooperative way within a probabilistic framework that allows to make various kinds of decisions with maximum utility. For the evaluation of the proposed concepts, the exemplary application Cooperative Adaptive Cruise Control (CACC) has been implemented on the basis of a particle lter which is used for the situation estimation. Initial simulations provided promising results and hence constitute a solid basis for future work in the eld of Cooperative Situation Awareness in Transportation