37 research outputs found
Traffic Sensitive and Traffic Load Aware Path Selection Algorithm For MMR WIMAX Networks
The recent developments in the broadband wireless access (BWA) communication systems have introduced several major changes to the existing systems. Legacy IEEE 802.16j is one such amendment to the existing IEEE 802.16 WiMAX family. The key modification introduced by 802.16j system is the
concept of relay station (RS), which may be used to enhance the system coverage or to make system throughput optimal. The end terminals, subscriber stations (SS) are unchanged in the standard. The overall change pertinent to the system has raised many unresolved issues related to RS and multi-hop
relay base station (MR-BS). The selection of path from a SS to MR-BS via a RS is also one of the issues,
need to be addressed. The path selection of a SS in both uplink and downlink directions is left open in the
standard. It is very significant to satisfy the traffics of stringent quality of service (QoS) requirements and
to appropriately manage the resources of a cell under different circumstances. This paper proposes a
path selection algorithm to achieve the aforementioned qualities in the network. The path selection
metrics include traffic load of the transparent relay station and traffic sensitivity factor of the SS. An
extensive simulation work discusses the performance evaluation of the proposed work using QualNet simulator
Relay Technologies in IEEE 802.16j Mobile Multi-hop Relay (MMR) Networks
IEEE 802.16 standard is created to compete with cable access networks. In the beginning end users are immobile and have a line of sight with base station, now it moved to mobile non line of sight (NLOS) with the new standard IEEE 802.16e and IEEE 802.16j. The new IEEE 802.16j standard which is an amendment to IEEE 802.16e is mobile multi hop relay (MMR) specification for wireless networks. This paper discusses relay modes, relay transmission schemes and relay pairing schemes of IEEE 802.16j. Relay technologies such as transparent relay modes, non transparent relay mode, relay pairing schemes such as centralized relay pairing schemes, distributed relay pairing scheme, characterises of relay based networks such as throughput enhancement, capacity increase, cost reduction , relay techniques such as time domain frequency domain relay techniques and relay placement are also discussed in this paper. The paper also discusses about integration of IEEE 802.16j with IEEE 802.11. Keywords: IEEE 802.16j, Relay pairing schemes, relay techniques, Relay modes, WIMAX, NCTUns, et
Relay selection in mobile multihop relay network
Mobile Multihop Relay (MMR) network is an attractive and low-cost solution for expanding service coverage and enhancing throughput of the conventional single hop network. However, mobility of Mobile Station (MS) in MMR network might lead to performance degradation in terms of Quality of Service (QoS). Selecting an appropriate Relay Station (RS) that can support data transmission for high mobility MS to enhance QoS is one of the challenges in MMR network. The main goal of the work is to develop and enhance relay selection mechanisms that can assure continuous connectivity while ensuring QoS in MMR network using NCTUns simulation tools. The approach is to develop and enhance relay selection that allows cooperative data transmission in transparent relay that guarantees continuous connectivity. The proposed relay selection defined as Co-ReSL depends on weightage of SNR, α and weightage of Link Expiration Time (LET), β. The QoS performances of the proposed relay selections are in terms of throughput and average end-to-end (ETE) delay. The findings for Co-ReSL shows that at heavy traffic load, throughput increases up to 5.7% and average ETE delay reduces by 7.5% compared to Movement Aware Greedy Forwarding (MAGF) due to cooperative data transmission in selective links. The proposed relay selection mechanisms can be applied in any high mobility multi-tier cellular network
Connectivity in mobile multihop relay network
Mobile Multihop Relay (MMR) network is an attractive and low-cost solution for expanding service coverage and enhancing throughput of the conventional single hop network. However, mobility of Mobile Station (MS) in MMR network might lead to performance degradation in terms of Quality of Service (QoS). Selecting an appropriate Relay Station (RS) that can support data transmission for high mobility MS to enhance QoS is one of the challenges in MMR network. The main goal of the work is to develop and enhance relay selection mechanisms that can assure continuous connectivity while ensuring QoS in MMR network using NCTUns simulation tools. The approach is to develop and enhance a relay selection for MS with continuous connectivity in non-transparent relay. In this approach, the standard network entry procedure is modified to allow continuous connectivity with reduced signaling messages whenever MS joins RS that is out of Multihop Relay Base Station (MRBS) coverage and the relay selection is based on Signal to Noise Ratio (SNR). The QoS performances of the proposed relay selections are in terms of throughput and average end-to-end (ETE) delay. The findings for the proposed relay selection in non-transparent relay shows that the throughput degradation between low mobility MS (30m/s) and high mobility MS (50m/s) is only about 2.0%. The proposed relay selection mechanisms can be applied in any high mobility multi-tier cellular network
A Scalable QoS Scheduling Architecture For WiMAX Multi-Hop Relay Networks.
WiMAX Mobile Multi-hop Relay (MMR) network has been introduced to increase the capacity and extend the
coverage area of a single WiMAX Base Station (BS) by the use of a Relay Station (RS)
Qualitative Investigation of the Performance of Real-Time Application of IEEE 802.16e standard WiMAX Relay Networks
The ability of an application to adapt its behavior to changing network conditions depends on the available bandwidth, throughput, delay and packet loss in a network path. These are of major importance in congestion control, streaming applications, quality of service verification, relay selection and many other areas in WiMAX relay stations. Mobile WiMAX, which is based on the IEEE 802.16e standard, provides support for and enables full mobility to users. In an effort to optimize and enhance the overall network throughput, this paper will propose a mobile relay framework. WiMAX is based on the IEEE 802.16e standard, and can support various types of handovers, while allowing for full mobility from the user endpoint. Different methodologies were used to compare different aspects of WiMAX relay stations including throughput, delay, SNR and network load. OPNET modular was used to develop and measure these set of network performance metrics. To accurately measure and evaluate the aforementioned network parameters we employed techniques that were able to process large amounts of data, this aided in provision of much more informed recommendations as to the type of relay station modes that should be installed engender enhanced, improved and optimal Quality of Service (QoS) within the network perimeter. This paper measured the overall network throughput, delay, SNR and network load of relay networks comprising mainly of multimedia applications. Keywords: WiMAX, QoS, Relay Station, Simulation, Topology, Throughput, Delay, Packet Los
Adaptive frame structure and OFDMA resource allocation in mobile multi-hop relay networks
The objective of this thesis research is to optimize network throughput and fairness, and enhance bandwidth utilization in wireless mobile multi-hop relay (MMR) networks. To enhance bandwidth utilization, we propose an adaptive OFDMA frame structure which is used by the base station and the non-transparent relay stations. To optimize throughput and fairness, we develop an adaptive OFDMA allocation algorithm by using the proposed adaptive OFDMA frame. The effectiveness of the proposed schemes has been verified by numeric simulations.
Providing ubiquitous coverage with wireless metropolitan area networks (WMANs) can be costly, especially in sparsely populated areas. In this scenario, cheaper relay stations (RSs) can be used to provide coverage instead of expensive base stations (BSs). The RS extends the coverage area of traditional BSs. This sort of network is known as a wireless MMR network. This thesis focuses on MMR networks that use orthogonal frequency division multiple access (OFDMA) and time division duplex (TDD) as a multiple access scheme and a duplex communication technique (e.g., WiMAX). The use of OFDMA resources (e.g., OFDMA symbols and subcarriers) and how they are shared in current schemes can reduce system capacity and network throughput in certain scenarios. To increase the capacity of the MMR network, we propose a new protocol that uses an adaptive OFDMA frame structure for BSs and RSs. We also propose adaptive OFDMA resource allocation for subscriber stations (SSs) within a BS or RS. We derive the maximum OFDMA resources that RSs can be assigned and synchronize access zones and relay zones between a superior station and its subordinate RSs. This is bounded by three properties defined in this thesis: a data relay property, a maximum balance property, and a relay zone limitation property. Finally, we propose max-min and proportional fairness schemes that use the proposed adaptive frame structure. The proposed scheme is the first approach that incorporates the adaptive technique for wireless MMR networks. We evaluate our scheme using simulations and numerical analysis. Results show that our technique improves resource allocation in wireless MMR networks. Further, in asymmetric distributions of SSs between access zones and relay zones, the proposed OFDMA allocation scheme performs two times better than the non-adaptive allocation scheme in terms of average max-min fairness and 70% better in terms of average throughput.Ph.D.Committee Chair: Dr. John A. Copeland; Committee Member: Dr. George F. Riley; Committee Member: Dr. Henry L. Owen; Committee Member: Dr. Mary Ann Ingram; Committee Member: Dr. Patrick Trayno
WIMAX Basics from PHY Layer to Scheduling and Multicasting Approaches
WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations