A novel on-board Unit to accelerate the penetration of ITS services

In-vehicle connectivity has experienced a big expansion in recent years. Car manufacturers have mainly proposed OBU-based solutions, but these solutions do not take full advantage of the opportunities of inter-vehicle peer-to-peer communications. In this paper we introduce GRCBox, a novel architecture that allows OEM user-devices to directly communicate when located in neighboring vehicles. In this paper we also describe EYES, an application we developed to illustrate the type of novel applications that can be implemented on top of the GRCBox. EYES is an ITS overtaking assistance system that provides the driver with real-time video fed from the vehicle located in front. Finally, we evaluated the GRCbox and the EYES application and showed that, for device-to-device communication, the performance of the GRCBox architecture is comparable to an infrastructure network, introducing a negligible impact

Optimal Content Downloading in Vehicular Networks

We consider a system where users aboard communication-enabled vehicles are interested in downloading different contents from Internet-based servers. This scenario captures many of the infotainment services that vehicular communication is envisioned to enable, including news reporting, navigation maps and software updating, or multimedia file downloading. In this paper, we outline the performance limits of such a vehicular content downloading system by modelling the downloading process as an optimization problem, and maximizing the overall system throughput. Our approach allows us to investigate the impact of different factors, such as the roadside infrastructure deployment, the vehicle-to-vehicle relaying, and the penetration rate of the communication technology, even in presence of large instances of the problem. Results highlight the existence of two operational regimes at different penetration rates and the importance of an efficient, yet 2-hop constrained, vehicle-to-vehicle relaying

V2X Content Distribution Based on Batched Network Coding with Distributed Scheduling

Content distribution is an application in intelligent transportation system to assist vehicles in acquiring information such as digital maps and entertainment materials. In this paper, we consider content distribution from a single roadside infrastructure unit to a group of vehicles passing by it. To combat the short connection time and the lossy channel quality, the downloaded contents need to be further shared among vehicles after the initial broadcasting phase. To this end, we propose a joint infrastructure-to-vehicle (I2V) and vehicle-to-vehicle (V2V) communication scheme based on batched sparse (BATS) coding to minimize the traffic overhead and reduce the total transmission delay. In the I2V phase, the roadside unit (RSU) encodes the original large-size file into a number of batches in a rateless manner, each containing a fixed number of coded packets, and sequentially broadcasts them during the I2V connection time. In the V2V phase, vehicles perform the network coded cooperative sharing by re-encoding the received packets. We propose a utility-based distributed algorithm to efficiently schedule the V2V cooperative transmissions, hence reducing the transmission delay. A closed-form expression for the expected rank distribution of the proposed content distribution scheme is derived, which is used to design the optimal BATS code. The performance of the proposed content distribution scheme is evaluated by extensive simulations that consider multi-lane road and realistic vehicular traffic settings, and shown to significantly outperform the existing content distribution protocols.Comment: 12 pages and 9 figure

Visible Light Communication Cyber Security Vulnerabilities For Indoor And Outdoor Vehicle-To-Vehicle Communication

Light fidelity (Li-Fi), developed from the approach of Visible Light Communication (VLC), is a great replacement or complement to existing radio frequency-based (RF) networks. Li-Fi is expected to be deployed in various environments were, due to Wi-Fi congestion and health limitations, RF should not be used. Moreover, VLC can provide the future fifth generation (5G) wireless technology with higher data rates for device connectivity which will alleviate the traffic demand. 5G is playing a vital role in encouraging the modern applications. In 2023, the deployment of all the cellular networks will reach more than 5 billion users globally. As a result, the security and privacy of 5G wireless networks is an essential problem as those modern applications are in people\u27s life everywhere. VLC security is as one of the core physical-layer security (PLS) solutions for 5G networks. Due to the fact that light does not penetrate through solid objects or walls, VLC naturally has higher security and privacy for indoor wireless networks compared to RF networks. However, the broadcasting nature of VLC caused concerns, e.g., eavesdropping, have created serious attention as it is a crucial step to validate the success of VLC in wild. The aim of this thesis is to properly address the security issues of VLC and further enhance the VLC nature security. We analyzed the secrecy performance of a VLC model by studying the characteristics of the transmitter, receiver and the visible light channel. Moreover, we mitigated the security threats in the VLC model for the legitimate user, by 1) implementing more access points (APs) in a multiuser VLC network that are cooperated, 2) reducing the semi-angle of LED to help improve the directivity and secrecy and, 3) using the protected zone strategy around the AP where eavesdroppers are restricted. According to the model\u27s parameters, the results showed that the secrecy performance in the proposed indoor VLC model and the vehicle-to-vehicle (V2V) VLC outdoor model using a combination of multiple PLS techniques as beamforming, secure communication zones, and friendly jamming is enhanced. The proposed model security performance was measured with respect to the signal to noise ratio (SNR), received optical power, and bit error rate (BER) Matlab simulation results

A Mini Review of Peer-to-Peer (P2P) for Vehicular Communication

In recent times, peer-to-peer (P2P) has evolved, where it leverages the capability to scale compared to server-based networks. Consequently, P2P has appeared to be the future distributed systems in emerging several applications. P2P is actually a disruptive technology for setting up applications that scale to numerous concurrent individuals. Thus, in a P2P distributed system, individuals become themselves as peers through contributing, sharing, and managing the resources in a network. In this paper, P2P for vehicular communication is explored. A comprehensive of the functioning concept of both P2P along with vehicular communication is examined. In addition, the advantages are furthermore conversed for a far better understanding on the implementation

Research study on inter-vehicle communication implementation in Malaysia

Vehicle-to-Vehicle (V2V) communications systems have recently drawn great attention, because they have the potential to improve convenience and safety of car traffic. Road accidents take the life of many people in the world each year, and much more people have been injuring and maiming. Statistical studies show that accidents could be avoid by 60% if drivers were informed only half a second before the accident. The objective of this report is to make an analysis of the possibility of implementing this technology in Malaysia. This research study is as guidance to develop a concept of V2V system. Applications with early deadlines are expected to require direct V2V communications, and the only standard currently supporting this is the IEEE 802.11p, included in the wireless access in vehicular environment (WAVE). The combination of WAVE and GPS is a good idea to forming collision avoidance system. The GPS system determines the location of vehicles and the WAVE system forming an ad- hoc peer-to-peer networking among the vehicles.V2V communication enable vehicle to communicate with their neighbouring vehicles even in the absence of a central base station to provide a safer and more efficient roads and to increase passenger safety. This technology can be implements in Malaysia but in order to do it some changing had to be made first to ensure the effectiveness of the technology. V2V communication should have a Doppler sensor as a device sensor that can integrates with cruise control to form adaptive cruise control. Other than that, it also need WAVE to assure a reliable communication system between vehicles. The GPS system is needs to determine exact location of car that can be use in roadways environment such as overtaking situatio

Cognitive Vehicular Networks: An Overview

AbstractCognitive Radio (CR) is extending the applications of wireless communications worldwide. Cognitive radio verifies the electromagnetic spectrum availability and permits the modification of the transmission parameters using the interaction with the environment. The goal is to opportunistically occupy spectral bands with minimum interference to other users or applications. Cognitive radio for Vehicular Ad hoc Networks (CRVs or CR-VANETs) is a new trend in the automotive market. Recent and future vehicles will offer functionalities for the transmission of intra-vehicular commands and dynamic access to wireless services, while the car is in transit. This paper describes the cognitive radio technology and its signal processing perspectives for the automotive market