Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Beyond Dataflow

This paper presents some recent advanced dataflow architectures. While the dataflow concept offers the potential of high performance, the performance of an actual dataflow implementation can be restricted by a limited number of functional units, limited memory bandwidth, and the need to associatively match pending operations with available functional units. Since the early 1970s, there have been significant developments in both fundamental research and practical realizations of dataflow models of computation. In particular, there has been active research and development in multithreaded architectures that evolved from the dataflow model. Also some other techniques for combining control-flow and dataflow emerged, such as coarse-grain dataflow, dataflow with complex machine operations, RISC dataflow, and micro dataflow. These developments have also had certain impact on the conception of highperformance superscalar processors in the “post-RISC” era

Programming MPSoC platforms: Road works ahead

This paper summarizes a special session on multicore/multi-processor system-on-chip (MPSoC) programming challenges. The current trend towards MPSoC platforms in most computing domains does not only mean a radical change in computer architecture. Even more important from a SW developer´s viewpoint, at the same time the classical sequential von Neumann programming model needs to be overcome. Efficient utilization of the MPSoC HW resources demands for radically new models and corresponding SW development tools, capable of exploiting the available parallelism and guaranteeing bug-free parallel SW. While several standards are established in the high-performance computing domain (e.g. OpenMP), it is clear that more innovations are required for successful\ud deployment of heterogeneous embedded MPSoC. On the other hand, at least for coming years, the freedom for disruptive programming technologies is limited by the huge amount of certified sequential code that demands for a more pragmatic, gradual tool and code replacement strategy

Architectural support for task dependence management with flexible software scheduling

The growing complexity of multi-core architectures has motivated a wide range of software mechanisms to improve the orchestration of parallel executions. Task parallelism has become a very attractive approach thanks to its programmability, portability and potential for optimizations. However, with the expected increase in core counts, finer-grained tasking will be required to exploit the available parallelism, which will increase the overheads introduced by the runtime system. This work presents Task Dependence Manager (TDM), a hardware/software co-designed mechanism to mitigate runtime system overheads. TDM introduces a hardware unit, denoted Dependence Management Unit (DMU), and minimal ISA extensions that allow the runtime system to offload costly dependence tracking operations to the DMU and to still perform task scheduling in software. With lower hardware cost, TDM outperforms hardware-based solutions and enhances the flexibility, adaptability and composability of the system. Results show that TDM improves performance by 12.3% and reduces EDP by 20.4% on average with respect to a software runtime system. Compared to a runtime system fully implemented in hardware, TDM achieves an average speedup of 4.2% with 7.3x less area requirements and significant EDP reductions. In addition, five different software schedulers are evaluated with TDM, illustrating its flexibility and performance gains.This work has been supported by the RoMoL ERC Advanced Grant (GA 321253), by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and Innovation (contracts TIN2015-65316-P, TIN2016-76635-C2-2-R and TIN2016-81840-REDT), by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), and by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671697 and No. 671610. M. Moretó has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI-2012-15047.Peer ReviewedPostprint (author's final draft

Dynamic adaptive parallel architecture integrates advanced technologies for petaflops-scale computing

Teraflops-scale computing systems are becoming available to an increasingly broad range of users as the performance of the constituent processing elements increases and their relative cost (e.g. per Mflops) decreases. To the original DOE ASCI Red machine has been added the ASCI Blue systems and additional 1 Teraflops commercial systems at key national centers. Clusters of low cost PCs employing COTS network technologies (e.g. Beowulf-class systems) will make peak Teraflops performance available for less than 2M in the near future for certain classes of well behaved problems. Future larger systems include the Japanese Earth Simulator with a peak performance of 40 Teraflops and three larger ASCI systems anticipated to provide peak performance of 10, 30, and 100 Teraflops culminating in 2005. These systems use existing or near term conventional technologies and architectures with some specialized integration logic and networking. While the peak performance goals can be satisfied through this strategy over the next decade, two major challenges confront the high performance computing community: (1) how to aggressively accelerate performance to the operational regime beyond a Petaflops, and (2) how to achieve high efficiency for a wide range of applications. The Hybrid Technology Multithreaded (HTMT) computer is under development by an interdisciplinary team of investigators to address both problems through an innovative combination of advanced technologies and dynamic adaptive architecture. This paper describes the strategy embodied by the HTMT architecture and discusses the key factors that may enable it to achieve two to three orders of magnitude performance with respect to today's largest systems at a cost and power consumption of only a factor of two to three times those same present day systems

Enhanced interleaved multithreaded multiprocessors and their performance analysis

In interleaved multithreading, the thread changes in each processor cycle, consecutive instructions are issued from different threads, and no data dependencies can stall the pipeline. Enhanced interleaved multithreading maintains a number of additional threads which are used to replace an active thread when it initiates a long-latency operation. Instruction issuing slots, which are lost in pure interleaved multithreading are thus used by instructions from the new thread. The paper studies performance improvements due to enhanced multithreading by analyzing a timed Petri net model of an enhanced multithreaded architecture at the instruction execution level

Advanced semantics for accelerated graph processing

Large-scale graph applications are of great national, commercial, and societal importance, with direct use in fields such as counter-intelligence, proteomics, and data mining. Unfortunately, graph-based problems exhibit certain basic characteristics that make them a poor match for conventional computing systems in terms of structure, scale, and semantics. Graph processing kernels emphasize sparse data structures and computations with irregular memory access patterns that destroy the temporal and spatial locality upon which modern processors rely for performance. Furthermore, applications in this area utilize large data sets, and have been shown to be more data intensive than typical floating-point applications, two properties that lead to inefficient utilization of the hierarchical memory system. Current approaches to processing large graph data sets leverage traditional HPC systems and programming models, for shared memory and message-passing computation, and are thus limited in efficiency, scalability, and programmability. The research presented in this thesis investigates the potential of a new model of execution that is hypothesized as a promising alternative for graph-based applications to conventional practices. A new approach to graph processing is developed and presented in this thesis. The application of the experimental ParalleX execution model to graph processing balances continuation-migration style fine-grain concurrency with constraint-based synchronization through embedded futures. A collection of parallel graph application kernels provide experiment control drivers for analysis and evaluation of this innovative strategy. Finally, an experimental software library for scalable graph processing, the ParalleX Graph Library, is defined using the HPX runtime system, providing an implementation of the key concepts and a framework for development of ParalleX-based graph applications

TANGO: Transparent heterogeneous hardware Architecture deployment for eNergy Gain in Operation

The paper is concerned with the issue of how software systems actually use Heterogeneous Parallel Architectures (HPAs), with the goal of optimizing power consumption on these resources. It argues the need for novel methods and tools to support software developers aiming to optimise power consumption resulting from designing, developing, deploying and running software on HPAs, while maintaining other quality aspects of software to adequate and agreed levels. To do so, a reference architecture to support energy efficiency at application construction, deployment, and operation is discussed, as well as its implementation and evaluation plans.Comment: Part of the Program Transformation for Programmability in Heterogeneous Architectures (PROHA) workshop, Barcelona, Spain, 12th March 2016, 7 pages, LaTeX, 3 PNG figure