1,319 research outputs found
A Simple Cooperative Diversity Method Based on Network Path Selection
Cooperative diversity has been recently proposed as a way to form virtual
antenna arrays that provide dramatic gains in slow fading wireless
environments. However most of the proposed solutions require distributed
space-time coding algorithms, the careful design of which is left for future
investigation if there is more than one cooperative relay. We propose a novel
scheme, that alleviates these problems and provides diversity gains on the
order of the number of relays in the network. Our scheme first selects the best
relay from a set of M available relays and then uses this best relay for
cooperation between the source and the destination. We develop and analyze a
distributed method to select the best relay that requires no topology
information and is based on local measurements of the instantaneous channel
conditions. This method also requires no explicit communication among the
relays. The success (or failure) to select the best available path depends on
the statistics of the wireless channel, and a methodology to evaluate
performance for any kind of wireless channel statistics, is provided.
Information theoretic analysis of outage probability shows that our scheme
achieves the same diversity-multiplexing tradeoff as achieved by more complex
protocols, where coordination and distributed space-time coding for M nodes is
required, such as those proposed in [7]. The simplicity of the technique,
allows for immediate implementation in existing radio hardware and its adoption
could provide for improved flexibility, reliability and efficiency in future 4G
wireless systems.Comment: To appear, IEEE JSAC, special issue on 4
DMT Optimal Cooperative Protocols with Destination-Based Selection of the Best Relay
We design a cooperative protocol in the context of wireless mesh networks in order to increase the reliability of wireless links. Destination terminals ask for cooperation when they fail in decoding data frames transmitted by source terminals. In that case, each destination terminal D calls a specific relay terminal B with a signaling frame to help its transmission with source terminal S. To select appropriate relays, destination terminals maintain tables of relay terminals, one for each possible source address. These tables are constituted by passively overhearing ongoing transmissions. Hence, when cooperation is needed between S and D, and when a relay B is found by terminal D in the relay table associated with terminal S, the destination terminal sends a negative acknowledgment frame that contains the address of B. When the best relay B has successfully decoded the source message, it sends a copy of the data frame to D using a selective decode-andforward transmission scheme. The on-demand approach allows maximization of the spatial multiplexing gain and the cooperation of the best relay allows maximization of the spatial diversity order. Hence, the proposed protocol achieves optimal diversitymultiplexing trade-off performance. Moreover, this performance is achieved through a collision-free selection process
Multi-rate relaying for performance improvement in IEEE 802.11 WLANs
It is well known that the presence of nodes using a low data transmit rate has a disproportionate impact on the performance of an IEEE 802.11 WLAN. ORP is an opportunistic relay protocol that allows nodes to increase their effective transmit rate by replacing a low data rate transmission with a two-hop sequence of shorter range, higher data rate transmissions, using an intermediate node as a relay. ORP differs from existing protocols in discovering relays experimentally, by optimistically making frames available for relaying. Relays identify themselves as suitable relays by forwarding these frames. This approach has several advantages compared with previously proposed relay protocols: Most importantly, ORP does not rely on observations of received signal strength to infer the availability of relay nodes and transmit rates. We present analytic and simulation results showing that ORP improves the throughput by up to 40% in a saturated IEEE 802.11b network
Opportunistic Relaying in Wireless Networks
Relay networks having source-to-destination pairs and half-duplex
relays, all operating in the same frequency band in the presence of block
fading, are analyzed. This setup has attracted significant attention and
several relaying protocols have been reported in the literature. However, most
of the proposed solutions require either centrally coordinated scheduling or
detailed channel state information (CSI) at the transmitter side. Here, an
opportunistic relaying scheme is proposed, which alleviates these limitations.
The scheme entails a two-hop communication protocol, in which sources
communicate with destinations only through half-duplex relays. The key idea is
to schedule at each hop only a subset of nodes that can benefit from
\emph{multiuser diversity}. To select the source and destination nodes for each
hop, it requires only CSI at receivers (relays for the first hop, and
destination nodes for the second hop) and an integer-value CSI feedback to the
transmitters. For the case when is large and is fixed, it is shown that
the proposed scheme achieves a system throughput of bits/s/Hz. In
contrast, the information-theoretic upper bound of bits/s/Hz
is achievable only with more demanding CSI assumptions and cooperation between
the relays. Furthermore, it is shown that, under the condition that the product
of block duration and system bandwidth scales faster than , the
achievable throughput of the proposed scheme scales as .
Notably, this is proven to be the optimal throughput scaling even if
centralized scheduling is allowed, thus proving the optimality of the proposed
scheme in the scaling law sense.Comment: 17 pages, 8 figures, To appear in IEEE Transactions on Information
Theor
Splitting algorithm for DMT optimal cooperative MAC protocols in wireless mesh networks
A cooperative protocol for wireless mesh networks is proposed in this paper. The protocol implements both on-demand relaying and a selection of the best relay terminal so only one terminal is relaying the source message when cooperation is needed. Two additional features are also proposed. The best relay is selected with a splitting algorithm. This approach allows fast relay selection within less than three time-slots, on average. Moreover, a pre-selection of relay candidates is performed prior to the splitting algorithm. Only terminals that are able to improve the direct path are pre-selected. So efficient cooperation is now guaranteed. We prove that this approach is optimal in terms of diversity-multiplexing trade-off. The protocol has been designed in the context of Nakagami-mfading channels. Simulation results show that the performance of the splitting algorithm does not depend on channel statistics
- …