An Enhanced Cluster-Based Routing Model for Energy-Efficient Wireless Sensor Networks

Energy efficiency is a crucial consideration in wireless sensor networks since the sensor nodes are resource-constrained, and this limited resource, if not optimally utilized, may disrupt the entire network's operations. The network must ensure that the limited energy resources are used as effectively as possible to allow for longer-term operation. The study designed and simulated an improved Genetic Algorithm-Based Energy-Efficient Routing (GABEER) algorithm to combat the issue of energy depletion in wireless sensor networks. The GABEER algorithm was designed using the Free Space Path Loss Model to determine each node's location in the sensor field according to its proximity to the base station (sink) and the First-Order Radio Energy Model to measure the energy depletion of each node to obtain the residual energy. The GABEER algorithm was coded in the C++ programming language, and the wireless sensor network was simulated using Network Simulator 3 (NS-3). The outcomes of the simulation revealed that the GABEER algorithm has the capability of increasing the performance of sensor network operations with respect to lifetime and stability period

From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites

In spite of extensive studies conducted on carbon nanotubes and silicate layers for their polymer-based nanocomposites, the rise of graphene now provides a more promising candidate due to its exceptionally high mechanical performance and electrical and thermal conductivities. The present study developed a facile approach to fabricate epoxy–graphene nanocomposites by thermally expanding a commercial product followed by ultrasonication and solution-compounding with epoxy, and investigated their morphologies, mechanical properties, electrical conductivity and thermal mechanical behaviour. Graphene platelets (GnPs) of 3.5

Energy-Efficient Load Balancing Ant Based Routing Algorithm for Wireless Sensor Networks

Wireless Sensor Networks (WSNs) are a type of self-organizing networks with limited energy supply and communication ability. One of the most crucial issues in WSNs is to use an energy-efficient routing protocol to prolong the network lifetime. We therefore propose the novel Energy-Efficient Load Balancing Ant-based Routing Algorithm (EBAR) for WSNs. EBAR adopts a pseudo-random route discovery algorithm and an improved pheromone trail update scheme to balance the energy consumption of the sensor nodes. It uses an efficient heuristic update algorithm based on a greedy expected energy cost metric to optimize the route establishment. Finally, in order to reduce the energy consumption caused by the control overhead, EBAR utilizes an energy-based opportunistic broadcast scheme. We simulate WSNs in different application scenarios to evaluate EBAR with respect to performance metrics such as energy consumption, energy efficiency, and predicted network lifetime. The results of this comprehensive study show that EBAR provides a significant improvement in comparison to the state-of-the-art approaches EEABR, SensorAnt, and IACO

Lifetime Improvement in Wireless Sensor Networks via Collaborative Beamforming and Cooperative Transmission

Collaborative beamforming (CB) and cooperative transmission (CT) have recently emerged as communication techniques that can make effective use of collaborative/cooperative nodes to create a virtual multiple-input/multiple-output (MIMO) system. Extending the lifetime of networks composed of battery-operated nodes is a key issue in the design and operation of wireless sensor networks. This paper considers the effects on network lifetime of allowing closely located nodes to use CB/CT to reduce the load or even to avoid packet-forwarding requests to nodes that have critical battery life. First, the effectiveness of CB/CT in improving the signal strength at a faraway destination using energy in nearby nodes is studied. Then, the performance improvement obtained by this technique is analyzed for a special 2D disk case. Further, for general networks in which information-generation rates are fixed, a new routing problem is formulated as a linear programming problem, while for other general networks, the cost for routing is dynamically adjusted according to the amount of energy remaining and the effectiveness of CB/CT. From the analysis and the simulation results, it is seen that the proposed method can reduce the payloads of energy-depleting nodes by about 90% in the special case network considered and improve the lifetimes of general networks by about 10%, compared with existing techniques.Comment: Invited paper to appear in the IEE Proceedings: Microwaves, Antennas and Propagation, Special Issue on Antenna Systems and Propagation for Future Wireless Communication

Optimal coverage multi-path scheduling scheme with multiple mobile sinks for WSNs

Wireless Sensor Networks (WSNs) are usually formed with many tiny sensors which are randomly deployed within sensing field for target monitoring. These sensors can transmit their monitored data to the sink in a multi-hop communication manner. However, the ‘hot spots’ problem will be caused since nodes near sink will consume more energy during forwarding. Recently, mobile sink based technology provides an alternative solution for the long-distance communication and sensor nodes only need to use single hop communication to the mobile sink during data transmission. Even though it is difficult to consider many network metrics such as sensor position, residual energy and coverage rate etc., it is still very important to schedule a reasonable moving trajectory for the mobile sink. In this paper, a novel trajectory scheduling method based on coverage rate for multiple mobile sinks (TSCR-M) is presented especially for large-scale WSNs. An improved particle swarm optimization (PSO) combined with mutation operator is introduced to search the parking positions with optimal coverage rate. Then the genetic algorithm (GA) is adopted to schedule the moving trajectory for multiple mobile sinks. Extensive simulations are performed to validate the performance of our proposed method

Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications

Wireless sensor networks monitor dynamic environments that change rapidly over time. This dynamic behavior is either caused by external factors or initiated by the system designers themselves. To adapt to such conditions, sensor networks often adopt machine learning techniques to eliminate the need for unnecessary redesign. Machine learning also inspires many practical solutions that maximize resource utilization and prolong the lifespan of the network. In this paper, we present an extensive literature review over the period 2002-2013 of machine learning methods that were used to address common issues in wireless sensor networks (WSNs). The advantages and disadvantages of each proposed algorithm are evaluated against the corresponding problem. We also provide a comparative guide to aid WSN designers in developing suitable machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial