14,770 research outputs found

    Meso-scale FDM material layout design strategies under manufacturability constraints and fracture conditions

    Get PDF
    In the manufacturability-driven design (MDD) perspective, manufacturability of the product or system is the most important of the design requirements. In addition to being able to ensure that complex designs (e.g., topology optimization) are manufacturable with a given process or process family, MDD also helps mechanical designers to take advantage of unique process-material effects generated during manufacturing. One of the most recognizable examples of this comes from the scanning-type family of additive manufacturing (AM) processes; the most notable and familiar member of this family is the fused deposition modeling (FDM) or fused filament fabrication (FFF) process. This process works by selectively depositing uniform, approximately isotropic beads or elements of molten thermoplastic material (typically structural engineering plastics) in a series of pre-specified traces to build each layer of the part. There are many interesting 2-D and 3-D mechanical design problems that can be explored by designing the layout of these elements. The resulting structured, hierarchical material (which is both manufacturable and customized layer-by-layer within the limits of the process and material) can be defined as a manufacturing process-driven structured material (MPDSM). This dissertation explores several practical methods for designing these element layouts for 2-D and 3-D meso-scale mechanical problems, focusing ultimately on design-for-fracture. Three different fracture conditions are explored: (1) cases where a crack must be prevented or stopped, (2) cases where the crack must be encouraged or accelerated, and (3) cases where cracks must grow in a simple pre-determined pattern. Several new design tools, including a mapping method for the FDM manufacturability constraints, three major literature reviews, the collection, organization, and analysis of several large (qualitative and quantitative) multi-scale datasets on the fracture behavior of FDM-processed materials, some new experimental equipment, and the refinement of a fast and simple g-code generator based on commercially-available software, were developed and refined to support the design of MPDSMs under fracture conditions. The refined design method and rules were experimentally validated using a series of case studies (involving both design and physical testing of the designs) at the end of the dissertation. Finally, a simple design guide for practicing engineers who are not experts in advanced solid mechanics nor process-tailored materials was developed from the results of this project.U of I OnlyAuthor's request

    Multi-Attribute Utility Preference Robust Optimization: A Continuous Piecewise Linear Approximation Approach

    Full text link
    In this paper, we consider a multi-attribute decision making problem where the decision maker's (DM's) objective is to maximize the expected utility of outcomes but the true utility function which captures the DM's risk preference is ambiguous. We propose a maximin multi-attribute utility preference robust optimization (UPRO) model where the optimal decision is based on the worst-case utility function in an ambiguity set of plausible utility functions constructed using partially available information such as the DM's specific preferences between some lotteries. Specifically, we consider a UPRO model with two attributes, where the DM's risk attitude is multivariate risk-averse and the ambiguity set is defined by a linear system of inequalities represented by the Lebesgue-Stieltjes (LS) integrals of the DM's utility functions. To solve the maximin problem, we propose an explicit piecewise linear approximation (EPLA) scheme to approximate the DM's true unknown utility so that the inner minimization problem reduces to a linear program, and we solve the approximate maximin problem by a derivative-free (Dfree) method. Moreover, by introducing binary variables to locate the position of the reward function in a family of simplices, we propose an implicit piecewise linear approximation (IPLA) representation of the approximate UPRO and solve it using the Dfree method. Such IPLA technique prompts us to reformulate the approximate UPRO as a single mixed-integer program (MIP) and extend the tractability of the approximate UPRO to the multi-attribute case. Furthermore, we extend the model to the expected utility maximization problem with expected utility constraints where the worst-case utility functions in the objective and constraints are considered simultaneously. Finally, we report the numerical results about performances of the proposed models.Comment: 50 pages,18 figure

    Architecture Smells vs. Concurrency Bugs: an Exploratory Study and Negative Results

    Full text link
    Technical debt occurs in many different forms across software artifacts. One such form is connected to software architectures where debt emerges in the form of structural anti-patterns across architecture elements, namely, architecture smells. As defined in the literature, ``Architecture smells are recurrent architectural decisions that negatively impact internal system quality", thus increasing technical debt. In this paper, we aim at exploring whether there exist manifestations of architectural technical debt beyond decreased code or architectural quality, namely, whether there is a relation between architecture smells (which primarily reflect structural characteristics) and the occurrence of concurrency bugs (which primarily manifest at runtime). We study 125 releases of 5 large data-intensive software systems to reveal that (1) several architecture smells may in fact indicate the presence of concurrency problems likely to manifest at runtime but (2) smells are not correlated with concurrency in general -- rather, for specific concurrency bugs they must be combined with an accompanying articulation of specific project characteristics such as project distribution. As an example, a cyclic dependency could be present in the code, but the specific execution-flow could be never executed at runtime

    GNN for Deep Full Event Interpretation and hierarchical reconstruction of heavy-hadron decays in proton-proton collisions

    Full text link
    The LHCb experiment at the Large Hadron Collider (LHC) is designed to perform high-precision measurements of heavy-hadron decays, which requires the collection of large data samples and a good understanding and suppression of multiple background sources. Both factors are challenged by a five-fold increase in the average number of proton-proton collisions per bunch crossing, corresponding to a change in the detector operation conditions for the LHCb Upgrade I phase, recently started. A further ten-fold increase is expected in the Upgrade II phase, planed for the next decade. The limits in the storage capacity of the trigger will bring an inverse relation between the amount of particles selected to be stored per event and the number of events that can be recorded, and the background levels will raise due to the enlarged combinatorics. To tackle both challenges, we propose a novel approach, never attempted before in a hadronic collider: a Deep-learning based Full Event Interpretation (DFEI), to perform the simultaneous identification, isolation and hierarchical reconstruction of all the heavy-hadron decay chains per event. This approach radically contrasts with the standard selection procedure used in LHCb to identify heavy-hadron decays, that looks individually at sub-sets of particles compatible with being products of specific decay types, disregarding the contextual information from the rest of the event. We present the first prototype for the DFEI algorithm, that leverages the power of Graph Neural Networks (GNN). This paper describes the design and development of the algorithm, and its performance in Upgrade I simulated conditions

    Herramientas de digitalización y calidad total de un puesto de control migratorio, Callao-2021

    Get PDF
    El objetivo general del estudio se estableció determinar la relación que existe entre las herramientas de digitalización y la calidad total de un puesto de control migratorio, Callao durante el 2021. Así la metodología comprendió un enfoque cuantitativo, de nivel básica, cuyo diseño fue no experimental-correlacional y el corte transversal. Además, la población estuvo conformada por 160 trabajadores del puesto de control migratorio, cuya muestra fue determinada de manera probabilística hallando 113 trabajadores para la aplicación de dos cuestionarios que fueron empleados como instrumentos. El instrumento fue validado y confiabilizado para la aplicación entre la muestra. Así entre los resultados, se encontró que respecto a las herramientas de digitalización estas fueron inadecuadas (2.7%); moderadamente adecuada (64.6%) y adecuada (32.7%) y según la calidad total fue inadecuada (9.7%); moderadamente adecuada (55.8%) y adecuada (34.5%) entre los trabajadores. En consecuencia, se concluyó que la relación que existe entre las herramientas de digitalización y la calidad total de un puesto de control migratorio en Callao durante el año 2021 fue una correlación positiva considerable (r = 0,755)

    Epoxy as Filler or Matrix for Polymer Composites

    Get PDF
    Epoxy is a widely used polymer because of its ease of processing, high adhesiveness, and high chemical resistance. Epoxy-based composites are commonly used in aerospace, automotive, and marine applications. The epoxy type, function, curing agent, and curing process are discussed in this chapter. Epoxy is used as either a filler or polymer matrix in composite applications. As a filler, the epoxy modification on the fiber is discussed. As a polymer matrix, the epoxy is reinforced by natural and synthetic fibers. The manufacturing process and the fabricated epoxy-based composites’ performance (e.g., mechanical and thermal properties) are investigated. The advantages and disadvantages of epoxy’s function are discussed and summarized. Epoxy modification is an effective approach to improve the composites’ performance

    The Professional Identity of Doctors who Provide Abortions: A Sociological Investigation

    Get PDF
    Abortion is a medicalised problem in England and Wales, where the law places doctors at the centre of legal provision and puts doctors in control of who has an abortion. However, the sex-selection abortion scandal of 2012 presented a very real threat to 'abortion doctors', when the medical profession's values and practices were questioned in the media, society and by Members of Parliament. Doctors found themselves at the centre of a series of claims that stated doctors were acting both illegally and unethically, driven by profit rather than patient needs. Yet, the perspectives of those doctors who provide abortions has been under-researched; this thesis aims to fill that gap by examining the beliefs and values of this group of doctors. Early chapters highlight the ambiguous position of the abortion provider in Britain, where doctors are seen as a collective group of professionals motivated by medical dominance and medical autonomy. They outline how this position is then questioned and contested, with doctors being presented as unethical. By studying abortion at the macro-, meso- and micro-levels, this thesis seeks to better understand the values of the 'abortion doctor', and how these levels shape the work and experiences of abortion providers in England and Wales. This thesis thus addresses the question: 'What do abortion doctors' accounts of their professional work suggest about the contemporary dynamics of the medicalisation of abortion in Britain?'. It investigates the research question using a qualitative methodological approach: face-to-face and telephone interviews were conducted with 47 doctors who provide abortions in England and Wales. The findings from this empirical study show how doctors' values are linked to how they view the 'normalisation of abortion'. At the macro-level doctors, openly resisted the medicalisation of abortion through the position ascribed to them by the legal framework, yet at the meso-level doctors construct an identity where normalising abortion is based on further medicalising services. Finally, at the micro-level, the ambiguous position of the abortion provider is further identified in terms of being both a proud provider and a stigmatised individual. This thesis shows that while the existing medicalisation literature has some utility, it has limited explanatory power when investigating the problem of abortion. The thesis thus provides some innovative insights into the relevance and value of medicalisation through a comprehensive study on doctors' values, beliefs and practices

    VIRTUAL INFLUENCER MARKETING: ANTHROPOMORPHISM AND ITS EFFECT

    Get PDF
    Virtual influencers, computer-generated characters who are followed by many social media users, are increasingly contracted to endorse products and brands. However, little research has examined their effectiveness in influencer marketing. Filling this gap, we study anthropomorphism, an important feature of virtual influencers, and its role in virtual influencer marketing. Particularly, drawing from the marketing literature, we study four anthropomorphic elements, appearance, moral virtue, cognitive experience, and conscious emotionality, and their effects on followers\u27 purchase intention. These effects are modelled via the mediation of parasocial relationship with and perceived credibility of virtual influencers. Influencer-product congruence is posited as a moderator on the links between two mediators and purchase intention. An online survey will be conducted to test our hypotheses. This research extends the influencer marketing literature by exploring virtual influencer features and their effects on marketing effectiveness and provides knowledge on the anthropomorphism design of virtual influencers
    corecore