68 research outputs found
Design and Development of Low Torque Ripple Variable-Speed Drive System With Six-Phase Switched Reluctance Motors
Switched reluctance motor (SRM) drives conventionally use current control techniques at low speed and voltage control techniques at high speed. However, these conventional methods usually fail to restrain the torque ripple, which is normally associated with this type of machine. Compared with conventional three-phase SRMs, higher phase SRMs have the advantage of lower torque ripple: To further reduce their torque ripple, this paper presents a control method for torque ripple reduction in six-phase SRM drives. A constant instantaneous torque is obtained by regulating the rotational speed of the stator flux linkage. This torque control method is subsequently developed for a conventional converter and a proposed novel converter with fewer switching devices. Moreover, modeling and simulation of this six-phase SRM drive system has been conducted in detail and validated experimentally using a 4.0-kW six-phase SRM drive system. Test results demonstrate that the proposed torque control method has outstanding performance of restraining the torque ripple with both converters for the six-phase SRM, showing superior performance to the conventional control techniques
A novel driving method for switched reluctance motor with standard full bridge inverter
This paper proposes a new driving method for a switched reluctance motor (SRM) by using a standard full bridge. The windings in the SRM are connected in series to build a ring structure, where a controllable DC source is inserted. Based on the new structure, the theoretical analysis and calculation are made to determine the control parameters. Besides three-phase SRM, the new idea can also be applied to the SRMs with four and five phases. The new driving method is compared with the conventional method by simulation. The results show that with the new method, the ripple of torque and speed in the SRM reduces. The influence of the proposed method on the power rating and losses is then analyzed. The validation is also made to verify the application of the new method and the difference between the conventional driving method and the proposed method. The measured results match the simulated results well
Segmental rotor switched reluctance drives
One of the well-known drawbacks of switched reluctance machines is the relatively high output torque ripple. Techniques aiming to reduce machine torque ripple either compromise the machine performance or the simplicity of the inverter and the controller. The work presented in this thesis shows that low torque ripple over a wide speed range can be achieved without severe penalties in terms of the machine performance and the size, cost and complexity of the power electronics and the controller. This is achieved by designing a 6-phase machine and driving it from a three-phase full bridge circuit. Switched reluctance motors with segmented rotors are a relatively recent advancement in the electromagnetic design of doubly-salient reluctance motors, having only been introduced in 2002. By replacing the conventional toothed rotor with individual segments, it has been proven that higher torque density than conventional switched reluctance machines could be achieved. Early work by Mecrow and El-Kharashi has demonstrated the operation of prototype machines with short-pitched and fully-pitched windings. The machine design work presented here builds on this early work by examining aspects of the machine design and its operation. Two six-phase machines – one with a segmented rotor and the other with a toothed rotor - have been designed. Performance comparisons have been made between the two six-phase machines and a three phase segmented rotor machine that was previously designed at Newcastle University. Additionally, a three phase single tooth winding and a two phase segmented rotor switched reluctance machine have been studied in simulation and experimentally. Detailed comparison of inverter ratings and machine efficiencies are made under equal conditions for a 2-phase machine driven from h-bridge and asymmetric half-bridge inverters. This is achieved with results from a test rig and the use of accurate dynamic simulation. Simulation models for 3-phase and 6-phase machines have also been generated. Detailed comparison of inverter ratings and machine efficiencies are made under equal conditions for the 3-phase and 6-phase drives in the dynamic simulation. Comparisons between simulated and measured results are shown to be very good for all of the drives.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
SRM drives for electric traction
"GAECE" -- PortadaDescripció del recurs: 11 maig 2020GAECE (Grup d’accionaments elèctrics amb commutació electrònica). The group of electronically commutated electrical drives is a research team of Universitat Politècnica de Catalunya (UPC BARCELONATECH), which conducts investigation in four areas: electrical drives, power electronics, mechanics and energy and sustainability. Regarding electrical drives, research focuses on the development of new reluctance, permanent magnet and hybrid electrical drives. The main goal of those electrical drives is the integration of the power converter/controller and the mechanical transmission, being specially intended for the traction of light electric vehicles. That research is carried out by using the analysis of finite elements, taking into account eco-design criteria, considering new materials and new control strategies.First editio
A Review of the Power Converter Interfaces for Switched Reluctance Machines
The use of power electronic converters is essential for the operation of Switched Reluctance
Machines (SRMs). Many topologies and structures have been developed over the last years considering several specific applications for this kind of machine, improving the control strategies, performance range, fault-tolerant operation, among other aspects. Thus, due to the great importance of power electronic converters in such applications, this paper is focused on a detailed review of main structures and topologies for SRM drives. The proposed study is not limited to the classic two-level power converters topologies dedicated to the SRMs; it also presents a review about recent approaches, such as multilevel topologies and based on impedance source network. Moreover, this review is also focused on a new class of topologies associated to these machines, namely the ones with fault-tolerant capability. This new category of topologies has been a topic of research in recent years, being currently considered an area of great interest for future research work. An analysis, taking into consideration the main features of each structure and topology, was addressed in this review. A classification and comparison of the several structures and topologies for each kind of converter, considering modularity, boost capability, number of necessary switches and phases, integration in the machine design, control complexity, available voltage levels and fault-tolerant capability to different failure modes, is also presented. In this way, this review also includes a description of the presented solutions taking into consideration the reliability of the SRM drive.info:eu-repo/semantics/publishedVersio
Switched Reluctance Drives with Degraded Mode for Electric Vehicles
There are many types of electrical machines suitable for electric vehicles. Nowadays, most manufacturers and researchers tend towards two major alternatives: permanent magnet synchronous machines and induction machines. However, these are not the only competitive candidates. Reluctance machines, which have been well-known for some decades already, present some interesting advantages. For instance, switched reluctance machines are intrinsically redundant and fault-tolerant, which makes them attractive for applications in which robustness is compulsory. In this sense, switched reluctance drives can keep working even when one of their phases loses its functionality for any reason. In an electric vehicle, this would mean being able to keep driving the vehicle even after some failures, although with reduced performance (in degraded mode). In this chapter, switched reluctance drives for traction applications are analyzed, focusing on their capability to operate in degraded mode (with m-1 phases available)
Multi-objective torque control of switched reluctance machine
PhD ThesisThe recent growing interest in Switched Reluctance Drives (SRD) is due to the electrification
of many products in industries including electric/hybrid electric vehicles, more-electric
aircrafts, white-goods, and healthcare, in which the Switched Reluctance Machine (SRM) has
potential prospects in satisfying the respective requirements of these applications. Its main
merits are robust structure, suitability for harsh environments, fault-tolerance, low cost, and
ability to operate over a wide speed range. Nevertheless, the SRM has limitations such as large
torque ripple, high acoustic noise, and low torque density. This research focuses on the torque
control of the SRD with the objectives of achieving zero torque error, minimal torque ripple,
high reliability and robustness, and lower size, weight, and cost of implementation.
Direct Torque Control and Direct Instantaneous Torque Control are the most common methods
used to obtain desired torque characteristics including optimal torque density and minimized
torque ripple in SRD. However, these torque control methods, compared to conventional
hysteresis current control, require the use of power devices with a higher rating of about 150%
to achieve the desired superior performance. These requirements add extra cost, conduction
loss, and stress on the drive’s semiconductors and machine winding. To overcome these
drawbacks, a simple and intuitive torque control method based on a novel adaptive quasi sliding mode control is developed in this study. The proposed torque control approach is
designed considering the findings of an investigation performed in this thesis of the existing
widely used control techniques for SRD based on information flow complexity.
A test rig comprising a magnet assisted SRM driven by an asymmetric converter is constructed
to validate the proposed torque control method and to compare its performance with that of
direct instantaneous torque control, and current hysteresis control methods. The simulation and
experimental results show that the proposed torque control reduces the torque ripple over a
wide speed range without demanding a high current and/or a high switching frequency. In
addition, It has been shown that the proposed method is superior to current hysteresis control
method in the sensorless operation of the machine. Furthermore, the sensorless performance of
the proposed method is investigated with the lower component count R-Dump converter. The
simulation results have also demonstrated the excellent controller response using the standard
R-Dump converter and also with its novel version developed in this thesis that needs only one
current sensor
Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review
Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio
A novel step current excitation control method to reduce the torque ripple of outer-rotor switched reluctance motors
Featured in low-speed and high-torque operation, outer-rotor switched reluctance motors (OSRMs) have the potential to be widely deployed in low-speed commuter and logistics vehicle applications. In this paper, a five-phase OSRM and the control method featuring torque ripple reduction has been proposed, which can be applied as the wheel hub motor in the electric vehicles. The simulation was carried out to analyze the OSRM operation. The electromagnetic characteristics of single-phase and two-phase hybrid excitation mode, as well as step current excitation mode, were compared and analyzed. To solve the problem of the large torque ripple of OSRMs under traditional excitation modes, the torque ripple suppression method based on step current excitation was also studied. The experiment design, including motor start-up control, speed control, and torque ripple reduction, are presented to verify the system torque ripple mitigation method
- …