Stock evaluation and development of a breeding program for common carp (Cyprinus carpio) in Karnataka, India: progress of a research project

Common carp (Cyprinus carpio) is the single most important species for aquaculture in the state of Karnataka, India, where it is generally grown in polyculture with Indian major carps. Precocious maturation and unwanted reproduction in the species have been identified as constraints to increase production in aquaculture and culture-based fisheries in Karnataka state. Stocks of C. carpio obtained from Hungary (Amur and P3), Indonesia (Rajdanu) and Vietnam (SV) are being assessed alongside two local stocks (L-BRP and L-FRS) in a series of culture performance trials with the objective of setting up a base population for selective breeding. The paper presents progress of research being undertaken at the Fisheries Research Station, University of Agricultural Sciences, Bangalore, India

Closed-loop two-echelon repairable item systems

In this paper we consider closed loop two-echelon repairable item systems with repair facilities both at a number of local service centers (called bases) and at a central location (the depot). The goal of the system is to maintain a number of production facilities (one at each base) in optimal operational condition. Each production facility consists of a number of identical machines which may fail incidentally. Each repair facility may be considered to be a multi-server station, while any transport from the depot to the bases is modeled as an ample server. At all bases as well as at the depot, ready-for-use spare parts (machines) are kept in stock. Once a machine in the production cell of a certain base fails, it is replaced by a ready-for-use machine from that base's stock, if available. The failed machine is either repaired at the base or repaired at the central repair facility. In the case of local repair, the machine is added to the local spare parts stock as a ready-for-use machine after repair. If a repair at the depot is needed, the base orders a machine from the central spare parts stock to replenish its local stock, while the failed machine is added to the central stock after repair. Orders are satisfied on a first-come-first-served basis while any requirement that cannot be satisfied immediately either at the bases or at the depot is backlogged. In case of a backlog at a certain base, that base's production cell performs worse. To determine the steady state probabilities of the system, we develop a slightly aggregated system model and propose a special near-product-form solution that provides excellent approximations of relevant performance measures. The depot repair shop is modeled as a server with state-dependent service rates, of which the parameters follow from an application of Norton's theorem for Closed Queuing Networks. A special adaptation to a general Multi-Class MDA algorithm is proposed, on which the approximations are based. All relevant performance measures can be calculated with errors which are generally less than one percent, when compared to simulation results. \u

Fish genetics research in member countries and institutions of the International Network on Genetics in Aquaculture: Proceedings of the Fifth Steering Committee Meeting of INGA

A conference proceedings of the Fifth Steering Committee Meeting of the International Network on Genetics in Aquaculture (INGA), this publication incorporates information drawn from aquaculture genetics research undertaken or in progress in member countries and associate member institutions of INGA. The papers in this publication examine progress in aquaculture genetics research in developing countries and identify areas for possible collaboration between institutions in developing and developed countries towards developing better breeds of fish that can contribute to increased production and food security while ensuring the conservation of aquatic biodiversity.Fishery resources, Genetics, INGA, Information networks, ICLARM, SEAFDEC, FAO, Bangladesh, China, Cote d'Ivoire, Egypt, Fiji, India, Indonesia, Malawi, Malaysia, Philippines, Thailand, Viet Nam, Israel, UK, Netherlands,

Customized Pull Systems for Single-Product Flow Lines

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage of that line with each preceding stage; optimization of the corresponding simulation model, however, shows which of these potential control loops are actually implemented. This novel approach may result in one of the classic systems, but it may also be another type: (1) the total line may be decomposed into several segments, each with its own classic control system (e.g., segment 1 with Kanban, segment 2 with Conwip); (2) the total line or segments may combine different classic systems; (3) the line may be controlled through a new type of system. These different pull systems are found when applying the new approach to a set of twelve production lines. These lines are configured through the application of a statistical (Plackett-Burman) design with ten factors that characterize production lines (such as line length, demand variability, and machine breakdowns).Pull production / inventory;sampling;optimization;evolutionary algorithm

Recommendation domains for pond aquaculture: country case study: development and status of freshwater aquaculture in Cameroon

This report is an output of the project “Determination of high-potential aquaculture development areas and impact in Africa and Asia”. This monograph is the case study for Cameroon. Written in three parts, it describes the historical background, practices, stakeholder profiles, production levels, economic and institutional environment, policy issues, and prospects for aquaculture in the country. First, it documents the history and current status of the aquaculture in the country. Second, it assesses the technologies and approaches that either succeeded or failed to foster aquaculture development and discusses why. Third, it identifies the key reasons for aquaculture adoption

The USDA/Land Grant Extension Outlook Program -- A History and Assessment

Base Document for a Power-Point Presentation Extension Section and Senior Section Track Session AAEA Centennial ThemeTeaching/Communication/Extension/Profession,

Report of the 2005 Workshop on Ocean Ecodynamics Comparison in the Subarctic Pacific

I. Scientific Issues Posed by OECOS II. Participant Contributions to the OECOS Workshop A. ASPECTS OF PHYTOPLANKTON ECOLOGY IN THE SUBARCTIC PACIFIC Microbial community compositions by Karen E. Selph Subarctic Pacific lower trophic interactions: Production-based grazing rates and grazing-corrected production rates by Nicholas Welschmeyer Phytoplankton bloom dynamics and their physiological status in the western subarctic Pacific by Ken Furuya Temporal and spatial variability of phytoplankton biomass and productivity in the northwestern Pacific by Sei-ichi Saitoh, Suguru Okamoto, Hiroki Takemura and Kosei Sasaoka The use of molecular indicators of phytoplankton iron limitation by Deana Erdner B. IRON CONCENTRATION AND CHEMICAL SPECIATION Iron measurements during OECOS by Zanna Chase and Jay Cullen 25 The measurement of iron, nutrients and other chemical components in the northwestern North Pacific Ocean by Kenshi Kuma The measurement of iron, nutrients and other chemical components in the northwestern North Pacific Ocean by Kenshi Kuma C. PHYSICAL OCEANOGRAPHY, FINE-SCALE DISTRIBUTION PATTERNS AND AUTONOMOUS DRIFTERS The use of drifters in Lagrangian experiments: Positives, negatives and what can really be measured by Peter Strutton The interaction between plankton distribution patterns and vertical and horizontal physical processes in the eastern subarctic North Pacific by Timothy J. Cowles D. MICROZOOPLANKTON Microzooplankton processes in oceanic waters of the eastern subarctic Pacific: Project OECOS by Suzanne Strom Functional role of microzooplankton in the pelagic marine ecosystem during phytoplankton blooms in the western subarctic Pacific by Takashi Ota and Akiyoshi Shinada E. MESOZOOPLANKTON Vertical zonation of mesozooplankton, and its variability in response to food availability, density stratification, and turbulence by David L. Mackas and Moira Galbraith Marine ecosystem characteristics and seasonal abundance of dominant calanoid copepods in the Oyashio region by Atsushi Yamaguchi, Tsutomu Ikeda and Naonobu Shiga OECOS: Proposed mesozooplankton research in the Oyashio region, western subarctic Pacific by Tsutomu Ikeda Some background on Neocalanus feeding by Michael Dagg Size and growth of interzonally migrating copepods by Charles B. Miller Growth of large interzonal migrating copepods by Toru Kobari F. MODELING Ecosystem and population dynamics modeling by Harold P. Batchelder III. Reports from Workshop Breakout Groups A. PHYSICAL AND CHEMICAL ASPECTS WITH EMPHASIS ON IRON AND IRON SPECIATION B. PHYTOPLANKTON/MICROZOOPLANKTON STUDIES C. MESOZOOPLANKTON STUDIES IV. Issues arising during the workshop A. PHYTOPLANKTON STOCK VARIATIONS IN HNLC SYSTEMS AND TROPHIC CASCADES IN THE NANO AND MICRO REGIMES B. DIFFERENCES BETWEEN EAST AND WEST IN SITE SELECTION FOR OECOS TIME SERIES C. TIMING OF OECOS EXPEDITIONS D. CHARACTERIZATION OF PHYSICAL OCEANOGRAPHY V. Concluding Remarks VI. References (109 page document

Priority allocation decisions in large scale MTO/MTS multi-product manufacturing systems : Technical report

In this paper, the authors consider a single stage multi-product manufacturing facility producing a large number of end-products for delivery within a service constraint for the customer lead-time. The manufacturing facility is modeled as a multi-product, multi-priority queuing system. In order to reduce inventory costs, an e±cient priority allocation between items consists in producing some items according to a Make-To-Stock (MTS) policy and others according to a Make-To-Order (MTO)policy epending on their features (costs, required lead-time, demand rates). The authors propose a general optimization procedure that gives a near-optimal °ow control (MTO or MTS) to associate with each product and the corresponding near-optimal priority strategy. We illustrate e±ciency of our procedure via several examples and by a numerical analysis. In addition, we show numerically that a small number of priority classes is su±cient to obtain near-optimal performances.Make-to-Stock (MTS); Make-to-Order (MTO); Priority allocation; Scheduling rule; Heterogeneous multi-product queuing system