Design of a scheduling mechanism for an ATM switch

Includes bibliographical references.In this dissenation, the candidate proposes the use of a ratio to multiply the weights used in the matching algorithm to control the delay that individual connections encounter. We demonstrate the improved characteristics of a switch using a ratio presenting results from simulations. The candidate also proposes a novel scheduling mechanism for an input queued ATM switch. In order to evaluate the performance of the scheduling mechanism in terms of throughput and fairness, the use of various metrics, initially proposed in the literature to evaluate output buffered switches are evaluated, adjusted and applied to input scheduling. In particular the Worst-case Fairness Index (WFl) which measures the maximum delay a connection will encounter is derived for use in input queued switches

Scheduling in CDMA-based wireless packet networks.

Thesis (M.Sc. Eng.)-University of Natal, Durban, 2003.Modern networks carry a wide range of different data types, each with its own individual requirements. The scheduler plays an important role in enabling a network to meet all these requirements. In wired networks a large amount of research has been performed on various schedulers, most of which belong to the family of General Processor Sharing (GPS) schedulers. In this dissertation we briefly discuss the work that has been done on a range of wired schedulers, which all attempt to differentiate between heterogeneous traffic. In the world of wireless communications the scheduler plays a very important role, since it can take channel conditions into account to further improve the performance of the network. The main focus of this dissertation is to introduce schedulers, which attempt to meet the Quality of Service requirements of various data types in a wireless environment. Examples of schedulers that take channel conditions into account are the Modified Largest Weighted Delay First (M-LWDF), as well as a new scheduler introduced in this dissertation, known as the Wireless Fair Largest Weighted Delay First (WF-LWDF) algorithm. The two schemes are studied in detail and a comparison of their throughput, delay, power, and packet dropping performance is made through a range of simulations. The results are compared to the performance offour other schedulers. The fairness ofM-LWDF and WFLWDF is determined through simulations. The throughput results are used to establish Chernoff bounds of the fairness of these two algorithms. Finally, a summary is given of the published delay bounds of various schedulers, and the tightness of the resultant bounds is discussed

Dynamic bandwidth scheduling and burst construction algorithm for downlink in (4G) mobile WiMAX networks

Advanced wireless systems, also called fourth generation (4G) wireless systems, such as Mobile Worldwide interoperability for Microwave Access (WiMAX), are developed to provide broadband wireless access in true sense. Therefore, it becomes mandatory for such kind of systems to provide Quality of Service (QoS) support for wide range of applications. In such types of systems, wireless base stations are responsible for distributing proper amount of bandwidth among different mobile users, thus satisfying a user’s QoS requirements. The task of distributing proper amount of bandwidth rests upon a scheduling algorithm, typically executed at the base station. 2G and 3G wireless systems are able to provide only voice, low data rate, and delay insensitive services, such as Web browsing. This is due to the lack of development in digital modulation and multiple access schemes, which are two major aspects of physical layer of these systems. Digital modulation is used to combat with location-dependent channel errors which get introduced in the data transmitted by base station on a wireless channel to a mobile station. Hence, different locations of every mobile station in a cell coverage area require different modulation and coding schemes for error-free transmission. Link adaptation is a technique that makes the use of variable modulation and coding schemes possible, according to varying location of mobile stations. This technique is used by 4G systems to achieve error free transmissions. 2G and 3G systems are not capable of achieving error-free transmissions in many cases due to significantly fewer or no choice of modulation and coding schemes for different locations of mobile stations. In such cases, most of the time, wireless channel is either error-prone or error-free for mobile station. Scheduling algorithms developed for 2G and 3G systems focussed on providing long term average rate requirements of users, which are satisfied at the expense of zero transmission for mobile users experiencing bad or error prone channel. This approach was adopted to achieve efficient use of wireless channel capacity. This was the best approach adopted by majority of scheduling algorithms because delay sensitive applications were not supported in such systems and hence bounded delay was not a matter of concern. Hence, the majority of the algorithms focussed on providing long term average rate requirements while maximizing cell throughput. This helped in making efficient use of wireless channel capacity at the expense of zero transmission for mobile users experiencing bad channel and compromising delay performance. These approaches, however, will not be suitable for 4G systems as such systems support wide range of applications ranging from delay-insensitive to highly delay-sensitive. Hence in this thesis, a dynamic bandwidth scheduling algorithm called Leaky Bucket Token Bank (LBTB) is proposed. This algorithm exploits some advanced features of 4G systems, like link adaptation and multiple access scheme, to achieve long term average rate requirements for delay-insensitive applications and bounded delay for delay-sensitive applications. Advanced features of 4G systems also bring more challenges. One such challenge is Orthogonal Frequency Division Multiple Access (OFDMA), a multiple access scheme deployed in 4G systems. In OFDMA, scheduled data for different mobile stations is packed into bursts and mapped to a two dimensional structure of time and frequency, called OFDMA frame. It has been observed that the way bursts are mapped to OFDMA frame affects the wakeup time of mobile stations receiving data and therefore causes power consumption. Wakeup time is the time duration in OFDMA frame for which the mobile station becomes active. Since OFDMA frame is a limited and precious radio resource, the efficient use of such radio resource is necessary. Efficient use requires that the wastage of such radio resource be minimized. Hence in this thesis, a burst construction algorithm called Burst Construction for Fairness in Power (BCFP) is also proposed. The algorithm attempts to achieve fairness in power consumption of different mobile stations by affecting their wakeup time. It also attempts to minimize wastage of radio resources. For comparing the performance of joint proposed algorithms (LBTB+BCFP), the proposed burst construction algorithm (BCFP) is joined to the two other existing scheduling algorithms namely: Token Bank Fair Queuing (TBFQ) and Adaptive Token Bank Fair Queuing (ATBFQ). TBFQ is an algorithm developed for 3G wireless networks whereas, ATBFQ is an extension to the TBFQ and is developed for 4G wireless networks. Therefore, the performance of the proposed algorithms jointly together (LBTB+BCFP) is compared with the joint TBFQ and proposed burst construction algorithm (TBFQ+BCFP), as well as joint ATBFQ and proposed burst construction algorithm (ATBFQ+BCFP). We compare the performance in terms of average queuing delay, average cell throughput, packet loss, fairness among different mobile users, fairness in average wakeup times (average power consumption), and fraction of radio resources wasted. The performance of proposed burst construction algorithm (BCFP) is also compared with Round Robin algorithm in terms of fairness in average power consumption as well as fraction of radio resources wasted, for varying number of users

Real-Time Communication in Packet-Switched Networks

Abstract The dramatically increased bandwidths and processing capabilities of future high-speed networks make possible many distributed real-time applications, such as sensor-based applications and multimedia services. Since these applications will have tra c characteristics and performance requirements that di er dramatically from those of current data-oriented applications, new communication network architectures and protocols will be required. In this paper we discuss the performance requirements and tra c characteristics of various real-time applications, survey recent developments in the areas of network architecture and protocols for supporting real-time services, and develop frameworks in which these, and future, research e orts can be considered

Performance Management in ATM Networks

ATM is representative of the connection-oriented resource provisioning classof protocols. The ATM network is expected to provide end-to-end QoS guaranteesto connections in the form of bounds on delays, errors and/or losses. Performancemanagement involves measurement of QoS parameters, and application of controlmeasures (if required) to improve the QoS provided to connections, or to improvethe resource utilization at switches. QoS provisioning is very important for realtimeconnections in which losses are irrecoverable and delays cause interruptionsin service. QoS of connections on a node is a direct function of the queueing andscheduling on the switch. Most scheduling architectures provide static allocationof resources (scheduling priority, maximum buffer) at connection setup time. Endto-end bounds are obtainable for some schedulers, however these are precluded forheterogeneously composed networks. The resource allocation does not adapt to theQoS provided on connections in real time. In addition, mechanisms to measurethe QoS of a connection in real-time are scarce.In this thesis, a novel framework for performance management is proposed. Itprovides QoS guarantees to real time connections. It comprises of in-service QoSmonitoring mechanisms, a hierarchical scheduling algorithm based on dynamicpriorities that are adaptive to measurements, and methods to tune the schedulers atindividual nodes based on the end-to-end measurements. Also, a novel scheduler isintroduced for scheduling maximum delay sensitive traffic. The worst case analysisfor the leaky bucket constrained traffic arrivals is presented for this scheduler. Thisscheduler is also implemented on a switch and its practical aspects are analyzed.In order to understand the implementability of complex scheduling mechanisms,a comprehensive survey of the state-of-the-art technology used in the industry isperformed. The thesis also introduces a method of measuring the one-way delayand jitter in a connection using in-service monitoring by special cells

Scheduling algorithms for high-speed switches

The virtual output queued (VOQ) switching architecture was adopted for high speed switch implementation owing to its scalability and high throughput. An ideal VOQ algorithm should provide Quality of Service (QoS) with low complexity. However, none of the existing algorithms can meet these requirements. Several algorithms for VOQ switches are introduced in this dissertation in order to improve upon existing algorithms in terms of implementation or QoS features. Initially, the earliest due date first matching (EDDFM) algorithm, which is stable for both uniform and non-uniform traffic patterns, is proposed. EDDFM has lower probability of cell overdue than other existing maximum weight matching algorithms. Then, the shadow departure time algorithm (SDTA) and iterative SDTA (ISDTA) are introduced. The QoS features of SDTA and ISDTA are better than other existing algorithms with the same computational complexity. Simulations show that the performance of a VOQ switch using ISDTA with a speedup of 1.5 is similar to that of an output queued (OQ) switch in terms of cell delay and throughput. Later, the enhanced Birkhoff-von Neumann decomposition (EBVND) algorithm based on the Birkhoff-von Neumann decomposition (BVND) algorithm, which can provide rate and cell delay guarantees, is introduced. Theoretical analysis shows that the performance of EBVND is better than BVND in terms of throughput and cell delay. Finally, the maximum credit first (MCF), the Enhanced MCF (EMCF), and the iterative MCF (IMCF) algorithms are presented. These new algorithms have the similar performance as BNVD, yet are easier to implement in practice