Performance evaluation of distributed crossbar switch hypermesh

The interconnection network is one of the most crucial components in any multicomputer as it greatly influences the overall system performance. Several recent studies have suggested that hypergraph networks, such as the Distributed Crossbar Switch Hypermesh (DCSH), exhibit superior topological and performance characteristics over many traditional graph networks, e.g. k-ary n-cubes. Previous work on the DCSH has focused on issues related to implementation and performance comparisons with existing networks. These comparisons have so far been confined to deterministic routing and unicast (one-to-one) communication. Using analytical models validated through simulation experiments, this thesis extends that analysis to include adaptive routing and broadcast communication. The study concentrates on wormhole switching, which has been widely adopted in practical multicomputers, thanks to its low buffering requirement and the reduced dependence of latency on distance under low traffic. Adaptive routing has recently been proposed as a means of improving network performance, but while the comparative evaluation of adaptive and deterministic routing has been widely reported in the literature, the focus has been on graph networks. The first part of this thesis deals with adaptive routing, developing an analytical model to measure latency in the DCSH, and which is used throughout the rest of the work for performance comparisons. Also, an investigation of different routing algorithms in this network is presented. Conventional k-ary n-cubes have been the underlying topology of contemporary multicomputers, but it is only recently that adaptive routing has been incorporated into such systems. The thesis studies the relative performance merits of the DCSH and k-ary n-cubes under adaptive routing strategy. The analysis takes into consideration real-world factors, such as router complexity and bandwidth constraints imposed by implementation technology. However, in any network, the routing of unicast messages is not the only factor in traffic control. In many situations (for example, parallel iterative algorithms, memory update and invalidation procedures in shared memory systems, global notification of network errors), there is a significant requirement for broadcast traffic. The DCSH, by virtue of its use of hypergraph links, can implement broadcast operations particularly efficiently. The second part of the thesis examines how the DCSH and k-ary n-cube performance is affected by the presence of a broadcast traffic component. In general, these studies demonstrate that because of their relatively high diameter, k-ary n-cubes perform poorly when message lengths are short. This is consistent with earlier more simplistic analyses which led to the proposal for the express-cube, an enhancement of the basic k-ary n-cube structure, which provides additional express channels, allowing messages to bypass groups of nodes along their paths. The final part of the thesis investigates whether this "partial bypassing" can compete with the "total bypassing" capability provided inherently by the DCSH topology

A general analytical model of adaptive wormhole routing in k-ary n-cubes

Several analytical models of fully adaptive routing have recently been proposed for k-ary n-cubes and hypercube networks under the uniform traffic pattern. Although,hypercube is a special case of k-ary n-cubes topology, the modeling approach for hypercube is more accurate than karyn-cubes due to its simpler structure. This paper proposes a general analytical model to predict message latency in wormhole-routed k-ary n-cubes with fully adaptive routing that uses a similar modeling approach to hypercube. The analysis focuses Duato's fully adaptive routing algorithm [12], which is widely accepted as the most general algorithm for achieving adaptivity in wormhole-routed networks while allowing for an efficient router implementation. The proposed model is general enough that it can be used for hypercube and other fully adaptive routing algorithms

New fault-tolerant routing algorithms for k-ary n-cube networks

The interconnection network is one of the most crucial components in a multicomputer as it greatly influences the overall system performance. Networks belonging to the family of k-ary n-cubes (e.g., tori and hypercubes) have been widely adopted in practical machines due to their desirable properties, including a low diameter, symmetry, regularity, and ability to exploit communication locality found in many real-world parallel applications. A routing algorithm specifies how a message selects a path to cross from source to destination, and has great impact on network performance. Routing in fault-free networks has been extensively studied in the past. As the network size scales up the probability of processor and link failure also increases. It is therefore essential to design fault-tolerant routing algorithms that allow messages to reach their destinations even in the presence of faulty components (links and nodes). Although many fault-tolerant routing algorithms have been proposed for common multicomputer networks, e.g. hypercubes and meshes, little research has been devoted to developing fault-tolerant routing for well-known versions of k-ary n-cubes, such as 2 and 3- dimensional tori. Previous work on fault-tolerant routing has focused on designing algorithms with strict conditions imposed on the number of faulty components (nodes and links) or their locations in the network. Most existing fault-tolerant routing algorithms have assumed that a node knows either only the status of its neighbours (such a model is called local-information-based) or the status of all nodes (global-information-based). The main challenge is to devise a simple and efficient way of representing limited global fault information that allows optimal or near-optimal fault-tolerant routing. This thesis proposes two new limited-global-information-based fault-tolerant routing algorithms for k-ary n-cubes, namely the unsafety vectors and probability vectors algorithms. While the first algorithm uses a deterministic approach, which has been widely employed by other existing algorithms, the second algorithm is the first that uses probability-based fault- tolerant routing. These two algorithms have two important advantages over those already existing in the relevant literature. Both algorithms ensure fault-tolerance under relaxed assumptions, regarding the number of faulty components and their locations in the network. Furthermore, the new algorithms are more general in that they can easily be adapted to different topologies, including those that belong to the family of k-ary n-cubes (e.g. tori and hypercubes) and those that do not (e.g., generalised hypercubes and meshes). Since very little work has considered fault-tolerant routing in k-ary n-cubes, this study compares the relative performance merits of the two proposed algorithms, the unsafety and probability vectors, on these networks. The results reveal that for practical number of faulty nodes, both algorithms achieve good performance levels. However, the probability vectors algorithm has the advantage of being simpler to implement. Since previous research has focused mostly on the hypercube, this study adapts the new algorithms to the hypercube in order to conduct a comparative study against the recently proposed safety vectors algorithm. Results from extensive simulation experiments demonstrate that our algorithms exhibit superior performance in terms of reachability (chances of a message reaching its destination), deviation from optimality (average difference between minimum distance and actual routing distance), and looping (chances of a message continuously looping in the network without reaching destination) to the safety vectors

The Effect Of Hot Spots On The Performance Of Mesh--Based Networks

Direct network performance is affected by different design parameters which include number of virtual channels, number of ports, routing algorithm, switching technique, deadlock handling technique, packet size, and buffer size. Another factor that affects network performance is the traffic pattern. In this thesis, we study the effect of hotspot traffic on system performance. Specifically, we study the effect of hotspot factor, hotspot number, and hot spot location on the performance of mesh-based networks. Simulations are run on two network topologies, both the mesh and torus. We pay more attention to meshes because they are widely used in commercial machines. Comparisons between oblivious wormhole switching and chaotic packet switching are reported. Overall packet switching proved to be more efficient in terms of throughput when compared to wormhole switching. In the case of uniform random traffic, it is shown that the differences between chaotic and oblivious routing are indistinguishable. Networks with low number of hotspots show better performance. As the number of hotspots increases network latency tends to increase. It is shown that when the hotspot factor increases, performance of packet switching is better than that of wormhole switching. It is also shown that the location of hotspots affects network performance particularly with the oblivious routers since their achieved latencies proved to be more vulnerable to changes in the hotspot location. It is also shown that the smaller the size of the network the earlier network saturation occurs. Further, it is shown that the chaos router’s adaptivity is useful in this case. Finally, for tori, performance is not greatly affected by hotspot presence. This is mostly due to the symmetric nature of tori

A fault-tolerant routing strategy for k-ary n-direct s-indirect topologies based on intermediate nodes

[EN] Exascale computing systems are being built with thousands of nodes. The high number of components of these systems significantly increases the probability of failure. A key component for them is the interconnection network. If failures occur in the interconnection network, they may isolate a large fraction of the machine. For this reason, an efficient fault-tolerant mechanism is needed to keep the system interconnected, even in the presence of faults. A recently proposed topology for these large systems is the hybrid k-ary n-direct s-indirect family that provides optimal performance and connectivity at a reduced hardware cost. This paper presents a fault-tolerant routing methodology for the k-ary n-direct s-indirect topology that degrades performance gracefully in presence of faults and tolerates a large number of faults without disabling any healthy computing node. In order to tolerate network failures, the methodology uses a simple mechanism. For any source-destination pair, if necessary, packets are forwarded to the destination node through a set of intermediate nodes (without being ejected from the network) with the aim of circumventing faults. The evaluation results shows that the proposed methodology tolerates a large number of faults. For instance, it is able to tolerate more than 99.5% of fault combinations when there are 10 faults in a 3-D network with 1000 nodes using only 1 intermediate node and more than 99.98% if 2 intermediate nodes are used. Furthermore, the methodology offers a gracious performance degradation. As an example, performance degrades only by 1% for a 2-D network with 1024 nodes and 1% faulty links.This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO), by FEDER funds under Grant TIN2015-66972-C5-1-R, by Programa de Ayudas de Investigación y Desarrollo (PAID) from Universitat Politècnica de alència and by the financial support of the FP7 HiPEAC Network of Excellence under grant agreement 287759Peñaranda Cebrián, R.; Gómez Requena, ME.; López Rodríguez, PJ.; Gran, EG.; Skeie, T. (2017). A fault-tolerant routing strategy for k-ary n-direct s-indirect topologies based on intermediate nodes. Concurrency and Computation Practice and Experience. 29(13):1-11. https://doi.org/10.1002/cpe.4065S111291

Isomorphic Strategy for Processor Allocation in k-Ary n-Cube Systems

Due to its topological generality and flexibility, the k-ary n-cube architecture has been actively researched for various applications. However, the processor allocation problem has not been adequately addressed for the k-ary n-cube architecture, even though it has been studied extensively for hypercubes and meshes. The earlier k-ary n-cube allocation schemes based on conventional slice partitioning suffer from internal fragmentation of processors. In contrast, algorithms based on job-based partitioning alleviate the fragmentation problem but require higher time complexity. This paper proposes a new allocation scheme based on isomorphic partitioning, where the processor space is partitioned into higher dimensional isomorphic subcubes. The proposed scheme minimizes the fragmentation problem and is general in the sense that any size request can be supported and the host architecture need not be isomorphic. Extensive simulation study reveals that the proposed scheme significantly outperforms earlier schemes in terms of mean response time for practical size k-ary and n-cube architectures. The simulation results also show that reduction of external fragmentation is more substantial than internal fragmentation with the proposed scheme