Review of Ultra Wide Band (UWB) for Indoor Positioning with application to the elderly

The objective of this review is to analyze Ultra Wide Band (UWB) technology, as an option that allows developing new solutions in indoor positioning systems (IPS), mainly with a approach applied to the elderly. The methodology that has been applied corresponds to the definition of some basics concepts about UWB and some tests in the lab; the above to demonstrate the degree of accuracy that UWB offers compared to other technologies. The findings found and presented in this paper correspond to the identification of UWB as a technology with a high degree of accuracy for IPS; also, that there are other works related to the subject, with application in different areas, but specifically as an application for older people; regarding to the tests, these allowed to verify in the laboratory the operation and accuracy of UWB, for its possible application in IPS. The research described in this paper is the beginning of a implementation in a residence center, where accuracy in location and real-time response are important, in the future we hope make conclusive contributions of the implementations made

A Meta-Review of Indoor Positioning Systems

An accurate and reliable Indoor Positioning System (IPS) applicable to most indoor scenarios has been sought for many years. The number of technologies, techniques, and approaches in general used in IPS proposals is remarkable. Such diversity, coupled with the lack of strict and verifiable evaluations, leads to difficulties for appreciating the true value of most proposals. This paper provides a meta-review that performed a comprehensive compilation of 62 survey papers in the area of indoor positioning. The paper provides the reader with an introduction to IPS and the different technologies, techniques, and some methods commonly employed. The introduction is supported by consensus found in the selected surveys and referenced using them. Thus, the meta-review allows the reader to inspect the IPS current state at a glance and serve as a guide for the reader to easily find further details on each technology used in IPS. The analyses of the meta-review contributed with insights on the abundance and academic significance of published IPS proposals using the criterion of the number of citations. Moreover, 75 works are identified as relevant works in the research topic from a selection of about 4000 works cited in the analyzed surveys

Enhancing Indoor Localisation: a Bluetooth Low Energy (BLE) Beacon Placement approach

Indoor location-based services have become increasingly vital in various sectors, including industries, healthcare, airports, and crowded infrastructures, facilitating asset tracking and user navigation. This project addresses the critical challenge of optimising beacon placement for indoor location, employing Bluetooth technology as the communication protocol. The significance of this research lies in the effi ciency and accuracy that an optimised beacon layout can provide, enhancing the effectiveness of indoor positioning systems. The algorithm developed takes into con sideration materials attenuation, coverage and Line of Sight (LOS) conditions to optimise its layouts. Experimental validation of the algorithm’s performance was conducted by comparing two beacon layouts: one optimised by the algorithm and the other manually arranged by individuals with empirical knowledge in the field. The experiment considered three distinct positions within the schematic, allowing for a comprehensive assessment of the optimised layout’s superior performance. The results of this research offer insights into the potential of the algorithm to revolu tionise indoor location services, providing a more reliable and cost-effective solution for a multitude of applications.Os serviços de localização em ambientes internos tornaram-se cada vez mais essenciais em vários setores, incluindo indústrias, cuidados de saúde, aeroportos e infraestruturas movimentadas, facilitando o rastreamento de objetos e a navegação de utilizadores. Este projeto aborda o desafio crítico da otimização da colocação de beacons para localização em ambientes internos, utilizando a tecnologia Bluetooth como protocolo de comunicação. A importância desta pesquisa reside na eficiência e precisão que uma disposição otimizada de beacons pode proporcionar, melhorando a eficácia de sistemas de posicionamento em ambientes internos. O algoritmo desenvolvido leva em consideração a atenuação de materiais, a cobertura e as condições de visão direta para otimizar as suas disposições. A validação experimental do desempenho do algoritmo foi realizada ao comparar duas disposições de beacons: uma otimizada pelo algoritmo e outra organizada manualmente por indivíduos com conhecimento empírico na área. A experiência considerou três posições distintas no esquema, permitindo uma avaliação abrangente do desempenho superior da disposição otimizada. Os resultados desta pesquisa oferecem descobertas importantes sobre o potencial do algoritmo para revolucionar os serviços de localização em ambientes internos, proporcionando uma solução mais confiável e econômica para uma variedade de aplicações

A smart phone based multi-floor indoor positioning system for occupancy detection

At present there is a lot of research being done simulating building environment with artificial agents and predicting energy usage and other building performance related factors that helps to promote understanding of more sustainable buildings. To understand these energy demands it is important to understand how the building spaces are being used by individuals i.e. the occupancy pattern of individuals. There are lots of other sensors and methodology being used to understand building occupancy such as PIR sensors, logging information of Wi-Fi APs or ambient sensors such as light or CO2 composition. Indoor positioning can also play an important role in understanding building occupancy pattern. Due to the growing interest and progress being made in this field it is only a matter of time before we start to see extensive application of indoor positioning in our daily lives. This research proposes an indoor positioning system that makes use of the smart phone and its built-in integrated sensors; Wi-Fi, Bluetooth, accelerometer and gyroscope. Since smart phones are easy to carry helps participants carry on with their usual daily work without any distraction but at the same time provide a reliable pedestrian positioning solution for detecting occupancy. The positioning system uses the traditional Wi-Fi and Bluetooth fingerprinting together with pedestrian dead reckoning to develop a cheap but effective multi floor positioning solution. The paper discusses the novel application of indoor positioning technology to solve a real world problem of understanding building occupancy. It discusses the positioning methodology adopted when trying to use existing positioning algorithm and fusing multiple sensor data. It also describes the novel approach taken to identify step like motion in absence of a foot mounted inertial system. Finally the paper discusses results from limited scale trials showing trajectory of motion throughout the Nottingham Geospatial Building covering multiple floors

Indoor positioning system survey using BLE beacons

This project provides a survey of indoor positioning systems and reports experimental work with Bluetooth Low Energy (BLE) Beacons. A positioning algorithm based on the Received Signal Strength Index (RSSI) from Bluetooth Low Energy signals is proposed for indoor tracking of the position of a drone. Experimental tests for characterization of beacon signals are presented. The application of a Kalman filter to reduce the effect of fluctuations in beacons signals is described

Generalizable Deep-Learning-Based Wireless Indoor Localization

The growing interest in indoor localization has been driven by its wide range of applications in areas such as smart homes, industrial automation, and healthcare. With the increasing reliance on wireless devices for location-based services, accurate estimation of device positions within indoor environments has become crucial. Deep learning approaches have shown promise in leveraging wireless parameters like Channel State Information (CSI) and Received Signal Strength Indicator (RSSI) to achieve precise localization. However, despite their success in achieving high accuracy, these deep learning models suffer from limited generalizability, making them unsuitable for deployment in new or dynamic environments without retraining. To address the generalizability challenge faced by conventionally trained deep learning localization models, we propose the use of meta-learning-based approaches. By leveraging meta-learning, we aim to improve the models\u27 ability to adapt to new environments without extensive retraining. Additionally, since meta-learning algorithms typically require diverse datasets from various scenarios, which can be difficult to collect specifically for localization tasks, we introduce a novel meta-learning algorithm called TB-MAML (Task Biased Model Agnostic Meta Learning). This algorithm is specifically designed to enhance generalization when dealing with limited datasets. Finally, we conduct an evaluation to compare the performance of TB-MAML-based localization with conventionally trained localization models and other meta-learning algorithms in the context of indoor localization

A survey of deep learning approaches for WiFi-based indoor positioning

One of the most popular approaches for indoor positioning is WiFi fingerprinting, which has been intrinsically tackled as a traditional machine learning problem since the beginning, to achieve a few metres of accuracy on average. In recent years, deep learning has emerged as an alternative approach, with a large number of publications reporting sub-metre positioning accuracy. Therefore, this survey presents a timely, comprehensive review of the most interesting deep learning methods being used for WiFi fingerprinting. In doing so, we aim to identify the most efficient neural networks, under a variety of positioning evaluation metrics for different readers. We will demonstrate that despite the new emerging WiFi signal measures (i.e. CSI and RTT), RSS produces competitive performances under deep learning. We will also show that simple neural networks outperform more complex ones in certain environments

Signals of Opportunity for Positioning Purposes

O ver the last years, location-based services (LBS) have become popular due to the emergence of smartphones with capabilities of positioning their user’s location on Earth at unprecedented speed and convenience. Behind such feat are the technological advances in global navigation satellite systems (GNSS), such as Galileo, Globalnaya Navigazionnaya Sputnikovaya Sistema (GLONASS), Global Positioning Service (GPS) and Beidou. The easiness of smartphones and the improvement of positioning technology has driven LBS to be at the core of many business models. Some of these business models rely on the user’s location to pick him up on a car, relinquish a meal to him, offer insights on sports performance, locate items to be picked up on a warehouse, among many others.While LBS are driving the need to continuously locate the user at higher degrees of accuracy and across any environment, be it in a city park, an urban canyon or inside a corporate office, some of these environments pose a challenge for GNSS. Indoor environments are particularly challenging for GNSS due to the attenuation and strong multipath imposed by walls and building materials. Such challenges and difficulties in signal acquisition have led to the development of solutions and technologies to improve positioning in indoor environments.While there are several commercial systems available to fulfill the needs of most LBS in indoor environments, most of these are not feasible to deploy at a global scale due to their infrastructure costs. Hence, several solutions have sought to build upon existing infrastructure to provide positioning information.Building upon existing infrastructure is what leads to the main topic of this thesis, the concept of signals of opportunity (SoO). A SoO is any wireless signal that can be exploited for a positioning purpose despite its initial design seeking to fulfill a different purpose. A few examples of these signals are IEEE 802.11 signals, commonly known as WiFi, Bluetooth, digital video broadcasting - terrestrial (DVB-T) and many of the cellular signals, such as long-term evolution (LTE), universal mobile telecommunications system (UMTS) and global mobile system (GSM).The goal of this thesis is to address various challenges related to SoO for positioning. From the identification of SoO at the physical layer, how to merge them at the algorithmic level and how to put them in use for a cognitive positioning system (CPS)

Five Facets of 6G: Research Challenges and Opportunities

Whilst the fifth-generation (5G) systems are being rolled out across the globe, researchers have turned their attention to the exploration of radical next-generation solutions. At this early evolutionary stage we survey five main research facets of this field, namely {\em Facet~1: next-generation architectures, spectrum and services, Facet~2: next-generation networking, Facet~3: Internet of Things (IoT), Facet~4: wireless positioning and sensing, as well as Facet~5: applications of deep learning in 6G networks.} In this paper, we have provided a critical appraisal of the literature of promising techniques ranging from the associated architectures, networking, applications as well as designs. We have portrayed a plethora of heterogeneous architectures relying on cooperative hybrid networks supported by diverse access and transmission mechanisms. The vulnerabilities of these techniques are also addressed and carefully considered for highlighting the most of promising future research directions. Additionally, we have listed a rich suite of learning-driven optimization techniques. We conclude by observing the evolutionary paradigm-shift that has taken place from pure single-component bandwidth-efficiency, power-efficiency or delay-optimization towards multi-component designs, as exemplified by the twin-component ultra-reliable low-latency mode of the 5G system. We advocate a further evolutionary step towards multi-component Pareto optimization, which requires the exploration of the entire Pareto front of all optiomal solutions, where none of the components of the objective function may be improved without degrading at least one of the other components

Improving a wireless localization system via machine learning techniques and security protocols

The recent advancements made in Internet of Things (IoT) devices have brought forth new opportunities for technologies and systems to be integrated into our everyday life. In this work, we investigate how edge nodes can effectively utilize 802.11 wireless beacon frames being broadcast from pre-existing access points in a building to achieve room-level localization. We explain the needed hardware and software for this system and demonstrate a proof of concept with experimental data analysis. Improvements to localization accuracy are shown via machine learning by implementing the random forest algorithm. Using this algorithm, historical data can train the model and make more informed decisions while tracking other nodes in the future. We also include multiple security protocols that can be taken to reduce the threat of both physical and digital attacks on the system. These threats include access point spoofing, side channel analysis, and packet sniffing, all of which are often overlooked in IoT devices that are rushed to market. Our research demonstrates the comprehensive combination of affordability, accuracy, and security possible in an IoT beacon frame-based localization system that has not been fully explored by the localization research community