Performance Analysis of a Three-to-Five Phase Dual Matrix Converter Based on Space Vector Pulse Width Modulation

In this paper, space vector pulse width modulation (SVPWM)-based algorithms for a five-phase open-end load fed from dual matrix converter (DMC) have been proposed. In the presented modulation methods, the reference output voltage vector is synthesized from two three-to-five phase matrix converters at both the ends of the load. Depending on the power-sharing of the two MCs, two proposed modulation methods are defined as equal reference sharing (ERS) and unequal reference sharing (URS). The performance of ERS and URS for the three-to-five phase DMC drive is compared. Performance comparison is based on the total harmonic distortion in the output voltages and the percentage of the voltage transferred from the source to the load, for the full linear modulation index (MI) range. Common mode voltage and zero sequence current in the load are also discussed. The efficiency of the ERS and URS is compared. It has been observed that the proposed ERS scheme offers better performance compared with URS for most of the MI values. The suggested modulation techniques are implemented in MATLAB/Simulink. The hardware setup is developed and control algorithm is implemented using dSPACE working in conjunction with the FPGA interface board for practical validation

Multilevel Multiphase Feedforward Space-Vector Modulation Technique

Multiphase converters have been applied to an increasing number of industrial applications in recent years. On the other hand, multilevel converters have become a mature technology mainly in medium- and high-power applications. One of the problems of multilevel converters is the dc voltage unbalance of the dc bus. Depending on the loading conditions and the number of levels of the converter, oscillations appear in the dc voltages of the dc link. This paper presents a feedforward modulation technique for multilevel multiphase converters that reduces the distortion under balanced or unbalanced dc conditions. The proposed modulation method can be applied to any multilevel-converter topology with any number of levels and phases. Experimental results are shown in order to validate the proposed feedforward modulation technique.Ministerio de Ciencia e Innovación DPI2009-07004Ministerio de Eduación y Ciencia TEC2007-6187

Optimal Modeled Six-Phase Space Vector Pulse Width Modulation Method for Stator Voltage Harmonic Suppression

Dual Y shift 30 six-phase motors are expected to be extensively applied in high-power yet energy-effective fields, and a harmonic-suppressing control strategy plays a vital role in extending their prominent features of low losses and ultra-quiet operation. Aiming at the suppression of harmonic voltages, this paper proposes a six-phase space vector pulse width modulation method based on an optimization model, namely OM-SVPWM. First, four adjacent large vectors are employed in each of 12 sectors on a fundamental sub-plane. Second, the optimization model is constructed to intelligently determine activation durations of the four vectors, where its objective function aims to minimize the synthesis result on a harmonic sub-plane, and its constraint condition is that the synthesis result on the fundamental sub-plane satisfies a reference vector. Finally, to meet the real-time requirement, optimum solutions are obtained by using general central path following algorithm (GCPFA). Simulation and experiment results prove that, the OM-SVPWM performs around 37% better than a state-of-the-art competitive SVPWM in terms of harmonics suppression, which promise the proposed OM-SVPWM conforms to the energy-effective direction in actual engineering applications.Peer reviewe

Open-End Winding Induction Motor Drive Based on Indirect Matrix Converter

Open-end winding induction machines fed from two standard two-level voltage source inverters (VSI) provide an attractive arrangement for AC drives. An alternative approach is to use a dual output indirect matrix converter (IMC). It is well known that IMC provides fully bidirectional power flow operation, with small input size filter requirements. Whilst a standard IMC consists of an AC–DC matrix converter input stage followed by a single VSI output stage, it is possible to replicate the VSI to produce multiple outputs. In this chapter, an open-end winding induction machine fed by an IMC with two output stages is presented. Different modulation strategies for the power converter are analyzed and discussed

Multi-phase inverter-controlled induction machine at varied rotor parameters

This paper presents a step-wise modelling of a symmetrical six-phase induction machine driven by a six-phase diode clamped multi-level inverter at a varying rotor resistance and motor inertia. The machine drive process was considered in two stages. The first stage presents the dynamic behavior of the machine when a load torque of 0 Nm and 100 Nm is applied at a varied rotor external resistance value of (0.8 and 3.2) Ω with constant motor inertia. The second stage showcased the variations in the speed, electromagnetic torque and rotor current when motor inertia is varied at (0.5 and 1.5) Kg-m2 with rotor resistance held constant. A six-phase five-level diode clamped converter phase displaced by sixty degrees with a modulation index of 0.8 was modeled to drive the poly-phase machine at a reduced %THD. All machine models were simulated in MATLAB 7.11. The simulation results showed that reduced oscillations in rotor current, motor speed and torque pulsations were achieved at a varied external rotor resistance and motor inertia

Simulation of 3-phase matrix converter using space vector modulation

This paper illustrates the simulation of 3-phase matrix converter using Space Vector Modulation (SVM). Variable AC output voltage engendered using matrix converter with bidirectional power switches controlled by appropriate switching pulse. The conventional PWM converter engenders switching common mode voltage across the load system terminals, which cause to common mode current and its leads to bearing failure in load drive. These problems can be rectified using SVM and which minimize the effect on the harmonic fluctuation in AC output voltage and stress on the power switch is reduced using bidirectional switch for proposed 3-phase matrix converter. The simulation results have been presented to validate the proposed system using matlab / simulink

Improved space vector modulation with reduced switching vectors for multi-phase matrix converter

Multi-phase converter inherits numerous advantages, namely superior fault tolerance, lower per-leg power rating and higher degree of freedom in control. With these advantages, this thesis proposes an improved space vector modulation (SVM) technique to enhance the ac-to-ac power conversion capability of the multi-phase matrix converter. The work is set to achieve two objectives. First is to improve the SVM of a three-to-seven phase single end matrix converter by reducing number of space vector combinations. Second is to use the active vector of the SVM to eliminate the common-mode voltage due to the heterogeneous switching combination of a dual three-to-five phase matrix converter. In the first part, the proposed technique utilizes only 129 out of 2,187 possible active space vectors. With the reduction, the SVM switching sequence is greatly simplified and the execution time is shortened. Despite this, no significant degradation in the output and the input waveform quality is observed from the MATLAB/Simulink simulation and the hardware prototype. The results show that the output voltage can reach up to 76.93% of the input voltage, which is the maximum physical limit of a three-to-seven phase matrix converter. In addition, the total harmonics distortion (THD) for the output voltage is measured to be below 5% over the operating frequency range of 0.1 Hz to 300 Hz. For the second part, the common-mode voltage elimination is based on the cancellation of the resultant vectors (that causes the common-mode to be formed), using a specially derived active vectors of the dual matrix converter. The elimination strategy is coupled with the ability to control the input power factor to unity. The proposed concept is verified by the MATLAB/Simulink simulation and is validated using a 5 kW three-to-five phase matrix converter prototype. The SVM switching algorithm itself is implemented on a dSPACE-1006 digital signal processor platform. The results prove that the common-mode voltage is successfully eliminated from the five-phase induction motor winding. Furthermore, the output phase voltage is boosted up to 150% of the input voltage in linear modulation range

Analysis of the Harmonic Performance of Power Converters and Electrical Drives

Power converters have progressively become the most efficient and attractive solution in recent decades in many industrial sectors, ranging from electric mobility, aerospace applications to attain better electric aircraft concepts, vast renewable energy resource integration in the transmission and distribution grid, the design of smart and efficient energy management systems, the usage of energy storage systems, and the achievement of smart grid paradigm development, among others.In order to achieve efficient solutions in this wide energy scenario, over the past few decades, considerable attention has been paid by the academia and industry in order to develop new methods to achieve power systems with maximum harmonic performance aiming for two main targets. On the one hand, the high-performance harmonic performance of power systems would lead to improvements in their power density, size and weight. This becomes critical in applications such as aerospace or electric mobility, where the power converters are on-board systems. On the other hand, current standards are becoming more and more strict in order to reduce the EMI and EMC noise, as well as meeting minimum power quality requirements (i.e., grid code standards for grid-tied power systems)

Z Source Inverter Topologies-A Survey

Need for alternative energy sources to satisfy the rising demand in energy consumption elicited the research in the area of power converters/inverters. An increasing interest of using Z source inverter/converter in power generation involving renewable energy sources like wind and solar energy for both off grid and grid tied schemes were originated from 2003. This paper surveys the literature of Z source inverters/converter topologies that were developed over the years