GMPLS-OBS interoperability and routing acalability in internet

The popularization of Internet has turned the telecom world upside down over the last two decades. Network operators, vendors and service providers are being challenged to adapt themselves to Internet requirements in a way to properly serve the huge number of demanding users (residential and business). The Internet (data-oriented network) is supported by an IP packet-switched architecture on top of a circuit-switched, optical-based architecture (voice-oriented network), which results in a complex and rather costly infrastructure to the transport of IP traffic (the dominant traffic nowadays). In such a way, a simple and IP-adapted network architecture is desired. From the transport network perspective, both Generalized Multi-Protocol Label Switching (GMPLS) and Optical Burst Switching (OBS) technologies are part of the set of solutions to progress towards an IP-over-WDM architecture, providing intelligence in the control and management of resources (i.e. GMPLS) as well as a good network resource access and usage (i.e. OBS). The GMPLS framework is the key enabler to orchestrate a unified optical network control and thus reduce network operational expenses (OPEX), while increasing operator's revenues. Simultaneously, the OBS technology is one of the well positioned switching technologies to realize the envisioned IP-over-WDM network architecture, leveraging on the statistical multiplexing of data plane resources to enable sub-wavelength in optical networks. Despite of the GMPLS principle of unified control, little effort has been put on extending it to incorporate the OBS technology and many open questions still remain. From the IP network perspective, the Internet is facing scalability issues as enormous quantities of service instances and devices must be managed. Nowadays, it is believed that the current Internet features and mechanisms cannot cope with the size and dynamics of the Future Internet. Compact Routing is one of the main breakthrough paradigms on the design of a routing system scalable with the Future Internet requirements. It intends to address the fundamental limits of current stretch-1 shortest-path routing in terms of RT scalability (aiming at sub-linear growth). Although "static" compact routing works fine, scaling logarithmically on the number of nodes even in scale-free graphs such as Internet, it does not handle dynamic graphs. Moreover, as multimedia content/services proliferate, the multicast is again under the spotlight as bandwidth efficiency and low RT sizes are desired. However, it makes the problem even worse as more routing entries should be maintained. In a nutshell, the main objective of this thesis in to contribute with fully detailed solutions dealing both with i) GMPLS-OBS control interoperability (Part I), fostering unified control over multiple switching domains and reduce redundancy in IP transport. The proposed solution overcomes every interoperability technology-specific issue as well as it offers (absolute) QoS guarantees overcoming OBS performance issues by making use of the GMPLS traffic-engineering (TE) features. Keys extensions to the GMPLS protocol standards are equally approached; and ii) new compact routing scheme for multicast scenarios, in order to overcome the Future Internet inter-domain routing system scalability problem (Part II). In such a way, the first known name-independent (i.e. topology unaware) compact multicast routing algorithm is proposed. On the other hand, the AnyTraffic Labeled concept is also introduced saving on forwarding entries by sharing a single forwarding entry to unicast and multicast traffic type. Exhaustive simulation campaigns are run in both cases in order to assess the reliability and feasible of the proposals

Deliverable DJRA1.2. Solutions and protocols proposal for the network control, management and monitoring in a virtualized network context

This deliverable presents several research proposals for the FEDERICA network, in different subjects, such as monitoring, routing, signalling, resource discovery, and isolation. For each topic one or more possible solutions are elaborated, explaining the background, functioning and the implications of the proposed solutions.This deliverable goes further on the research aspects within FEDERICA. First of all the architecture of the control plane for the FEDERICA infrastructure will be defined. Several possibilities could be implemented, using the basic FEDERICA infrastructure as a starting point. The focus on this document is the intra-domain aspects of the control plane and their properties. Also some inter-domain aspects are addressed. The main objective of this deliverable is to lay great stress on creating and implementing the prototype/tool for the FEDERICA slice-oriented control system using the appropriate framework. This deliverable goes deeply into the definition of the containers between entities and their syntax, preparing this tool for the future implementation of any kind of algorithm related to the control plane, for both to apply UPB policies or to configure it by hand. We opt for an open solution despite the real time limitations that we could have (for instance, opening web services connexions or applying fast recovering mechanisms). The application being developed is the central element in the control plane, and additional features must be added to this application. This control plane, from the functionality point of view, is composed by several procedures that provide a reliable application and that include some mechanisms or algorithms to be able to discover and assign resources to the user. To achieve this, several topics must be researched in order to propose new protocols for the virtual infrastructure. The topics and necessary features covered in this document include resource discovery, resource allocation, signalling, routing, isolation and monitoring. All these topics must be researched in order to find a good solution for the FEDERICA network. Some of these algorithms have started to be analyzed and will be expanded in the next deliverable. Current standardization and existing solutions have been investigated in order to find a good solution for FEDERICA. Resource discovery is an important issue within the FEDERICA network, as manual resource discovery is no option, due to scalability requirement. Furthermore, no standardization exists, so knowledge must be obtained from related work. Ideally, the proposed solutions for these topics should not only be adequate specifically for this infrastructure, but could also be applied to other virtualized networks.Postprint (published version

RSVP performance optimisation using multi-objective evolutionary optimisation

The proposed uses of the resource reservation protocol (RSVP) now extend beyond reserving resources in Internet Protocol (IP) networks to being a generic signaling protocol for generalised multi-protocol label switching (GMPLS). In any implementation of RSVP, there are a number of discretionary timing parameters, the values of which affect the efficacy of RSVP in establishing and maintaining reservations/connections. This work frames the interactions between key RSVP timing parameters and performance metrics as a multi-objective optimisation problem which, due to its intractable nature, is tackled using a reputable multi-objective evolutionary algorithm. It is shown that this approach is a feasible means of exploring many of the innate tradeoffs in soft-state protocols such as RSVP. This approach facilitates an extensive comparison of a number of variants of RSVP: standard RSVP, RSVP featuring the recently standardised retransmission algorithm and two subsequent variants of this algorithm, supporting the asymmetric delivery of RSVP control messages. These RSVP variants are compared in terms of multiple performance metrics under a number of different exemplar network conditions, giving insight into their relative merits. Furthermore, the relative significance of the different timing parameters is investigated and their most expedient values determined

Automatic laser shutdown implications for all optical data networks

Generalized multiprotocol label switching (GMPLS), optical packet, and burst-switched networks in which the synchronous digital hierarchy/synchronous optical network (SDH/SONET) layer is removed may be rendered nonfunctional because the current standard for triggering Automatic Power Reduction (APR) cannot distinguish between a fiber that has been de-energized and a fiber failure. If this standard is applied, without modification, the likelihood of unnecessary amplifier shutdown in optical networks is significant. These shutdown events may impact large regions of the network and render optical links inoperable. To avoid unnecessary amplifier shutdown, amendments to the current operation of APR are suggested

A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

Energy-Aware Weight Assignment Framework for Circuit Oriented GMPLS Networks

A branch of green networking research is consolidating. It aims at routing traffic with the goal of reducing the network energy consumption. It is usually referred to as Energy- Aware Routing. Previous works in this branch only focused on pure IP networks, e.g., assuming an Open Shortest Path First (OSPF) control plane, and best effort packet forwarding on the data plane. In this work, we consider instead Generalized Multi-Protocol Label Switching (GMPLS) backbone networks, where optical technologies allow to design "circuit switching" network management policies with strict bandwidth reservation policies. We define a simple and generic framework which generates a family of routing algorithms, based on an energy-aware weight assignment. In particular, routing weights are functions of both the energy consumption and the actual load of network devices. Using such weights, a simple minimum-cost routing allows finding the current least expensive circuit, minimising the additional energy cost. Results obtained on realistic case studies show that our weight assignment policy favours a consistent reduction of the network power consumption, without significantly affecting the network performance. Furthermore, the framework allows to trade energy efficiently and network performance, a desirable property at which ISPs are looking for. Simple and robust parameter settings allow reaching a win-win situation, with excellent performance in terms of both energy efficiency and network resource utilization

GMPLS-controlled OBS Network Simulator: Implementation of the signaling protocol

Projecte final de carrera fet en col.laboració amb ISCTE-IUL LisboaThe Optical Burst Switching (OBS) paradigm is regaining greater attention by the professionals and researchers of the optical networking field, as it offers a number of advantages when compared with other optical switching paradigms. This type of technology was developed with the objective to carry information all-optically without using any kind of buffering device. However, due to its one-way signaling process, the presence of a control plane is extremely useful to manage complementary signaling and routing features, providing flexibility, reliability and taking more benefits of the OBS networks. The goal of this project is to extend Generalized Multiprotocol Label Switching (GMPLS) control plane architecture to properly handle OBS networks. In spite of GMPLS is not prepared to lead with these type of networks, this flexible architecture has been seen as a potential candidate to be used as the control plane of other kinds of optical networks (e.g., IP, Ethernet, Optical Circuit networks) and therefore to manage control OBS networks. In this project, the existent event-driven JAVA simulator for OBS networks – JAVOBS – is extended to simulate a possible interoperability model between GMPLS and OBS technologies. The first objective is to implement a new control layer (GMPLS) separated from the data layer of the OBS network. The second and main objective fits on the basic signaling procedures implementation of the GMPLS Reservation Protocol-Traffic Engineering (RSVP-TE) protocol, in order to analyze the performance of the OBS network’s behavior when it is controlled by such interoperable control plane (GMPLS/OBS)