11 research outputs found

    Physical Layer Techniques for High Frequency Wireline Broadband Systems

    Get PDF
    This thesis collects contributions to wireline and wireless communication systems with an emphasis on multiuser and multicarrier physical layer technology. To deliver increased capacity, modern wireline access systems such as G.fast extend the signal bandwidth up from tens to hundreds of MHz. This ambitious development revealed a number of unforeseen hurdles such as the impact of impedance changes in various forms. Impedance changes have a strong effect on the performance of multi-user crosstalk mitigation techniques such as vectoring. The first part of the thesis presents papers covering the identification of one of these problems, a model describing why it occurs and a method to mitigate its effects, improving line stability for G.fast systems.A second part of the thesis deals with the effects of temperature changes on wireline channels. When a vectored (MIMO) wireline system is initialized, channel estimates need to be obtained. This thesis presents contributions on the feasibility of re-using channel coefficients to speed up the vectoring startup procedures, even after the correct coefficients have changed, e.g., due to temperature changes. We also present extensive measurement results showing the effects of temperature changes on copper channels using a temperature chamber and British cables. The last part of the thesis presents three papers on the convergence of physical layer technologies, more specifically the deployment of OFDM-based radio systems using twisted pairs in different ways. In one proposed scenario, the idea of using the access copper lines to deploy small cells inside users' homes is explored. The feasibility of the concept, the design of radio-heads and a practical scheme for crosstalk mitigation are presented in three contributions

    Mitigation of impulsive noise for SISO and MIMO G.fast system

    Get PDF
    To address the demand for high bandwidth data transmission over telephone transmission lines, International Telecommunication Union (ITU) has recently completed the fourth generation broadband (4GBB) copper access network technology, known as G.fast. Throughout this thesis, extensively investigates the wired broadband G.fast coding system and the novel impulsive noise reduction technique has been proposed to improve the performance of wired communications network in three different scenarios: single-line Discrete Multiple Tone (DMT)- G.fast system; a multiple input multiple-output (MIMO) DMTG.fast system, and MIMO G.fast system with different crosstalk cancellation methods. For each of these scenarios, however, Impulsive Noise (IN) is considered as the main limiting factor of performance system. In order to improve the performance of such systems, which use higher order QAM constellation such as G.fast system, this thesis examines the performance of DMT G.fast system over copper channel for six different higher signal constellations of M = 32, 128, 512, 2048, 8192 and 32768 in presence of IN modelled as the Middleton Class A (MCA) noise source. In contrast to existing work, this thesis presents and derives a novel equation of Optimal Threshold (OT) to improve the IN frequency domain mitigation methods applied to the G.fast standard over copper channel with higher QAM signal constellations. The second scenario, Multi-Line Copper Wire (MLCW) G.fast is adopted utilizing the proposed MLCW Chen model and is compared to a single line G-fast system by a comparative analysis in terms of Bit-Error-Rate(BER) performance of implementation of MLCW-DMT G.fast system. The third scenario, linear and non-linear crosstalk crosstalk interference cancellation methods are applied to MLCW G.fas and compared by a comparative analysis in terms of BER performance and the complexity of implementation.University of Technology for choosing me for their PhD scholarship and The Higher Committee For Education Development in Iraq(HCED

    Performance Enhancement in Copper Twisted Pair Cable Communications

    Get PDF
    The thesis focuses on the area of copper twisted pair based wireline communications. As one of the most widely deployed communication media, the copper twisted pair cable plays an important role in the communication network cabling infrastructure. This thesis looks to exploit diversity to improve twisted pair channels for data communications in two common application areas, namely Ethernet over Twisted Paris and digital subscriber line over twisted pair based telephone network. The first part of the thesis addresses new approaches to next generation Ethernet over twisted pair cable. The coming challenge for Ethernet over twisted pair cable is to realise a higher data rate beyond the 25/40GBASE-T standard, in relatively short reach scenarios. The straight-forward approaches, such as improving cable quality and extending frequency bandwidth, are unlikely to provide significant improvement in terms of data rate. However, other system diversities, such as spectrum utilization are yet to be fully exploited, so as to meet the desired data rate performance. The current balanced transmission over the structured twisted pair cable and its parallel single-in-single-out channel model is revisited and formulated as a full-duplex multiple-in-multiple-out (MIMO) channel model. With a common ground (provided by the cable shield), the balanced transmission is converted into unbalanced transmission, by replacing the differential-mode excitation with single-ended excitation. In this way, MIMO adoption may offer spectrum utilization advantages due to the doubled number of the channels. The S-parameters of the proposed MIMO channel model is obtained through the full wave electromagnetic simulation of a short CAT7A cable. The channel models are constructed from the resulting S-parameters, also the corresponding theoretical capacity is evaluated by exploiting different diversity scenarios. With higher spectrum efficiency, the orthogonal-frequency-division-multiplexing (OFDM) modulation can significantly improve the theoretical capacity compared with single-carrier modulation, where the channel frequency selectivity is aided. The MIMO can further enhance the capacity by minimising the impact of the crosstalk. When the crosstalk is properly handled under the unbalanced transmission, this thesis shows that the theoretical capacity of the EoTP cable can reach nearly 200GBit/s. In order to further extend the bandwidth capability of twisted pair cables, Phantom Mode transmission is studied, aiming at creating more channels under balanced transmission operation. The second part of the thesis focuses on the research of advanced scheduling algorithms for VDSL2 QoS enhancement. For VDSL2 broadband access networks, multi-user optimisation techniques have been developed, so as to improve the basic data rate performance. Spectrum balancing improves the network performance by optimising users transmit power spectra as the resource allocation, to mitigate the impact from the crosstalk. Aiming at enhancing the performance for the upstream VDSL2 service, where the users QoS demand is not known by all other users, a set of autonomous spectrum balancing algorithms is proposed. These optimise users transmit power spectra locally with only direct channel state information. To prevent selfish behaviour, the concept of a virtual user is introduced to represent the impact on both crosstalk interference and queueing status of other users. Moreover, novel algorithms are developed to determine the parameters and the weight of the virtual user. Another type of resource allocation in the VDSL2 network is crosstalk cancellation by centralised signal coordination. The history of the data queue is considered as a time series, on which different smooth filter characteristics are investigated in order to investigate further performance improvement. The use of filter techniques accounts for both the instantaneous queue length and also the previous data to determine the most efficient dynamic resource allocation. With the help of this smoothed dynamic resource allocation, the network will benefit from both reduced signalling communication and improved delay performance.The proposed algorithms are verified by numerical experiments

    Enhanced multi-user DMT spectrum management using polynomial matrix decomposition techniques

    Get PDF
    This thesis researches the increasingly critical roles played by intelligent resource management and interference mitigation algorithms in present-day input multiple output (MIMO) communication systems. This thesis considers the application of polynomial matrix decomposition (PMD) algorithms, an emerging broadband factorisation technology for broadband MIMO access networks. Present DSL systems’ performance is constrained by the presence of interference (crosstalk) between multiple users sharing a common physical cable bundle. Compared to the traditional static spectrum management methods that define their survival to the worst-case scenarios, DSM methods provides some degree of flexibility to both direct channel and noise parameters to improve evolvability and robustness significantly. A novel crosstalk-aware DSM algorithm is proposed for the efficient management of multi-user DSL systems. Joint power allocation procedures are considered for the proposed single-channel equalisation method in DSL access networks. This thesis then shows that DSM can also benefit overdetermined precoding-equalisation systems, when the channel state information (CSI) parameters call for a specific decision feedback criterion to achieve a perfect reconstruction. A reasonable redundancy is introduced to reformulate the original multi-user MIMO problem into the simplest case of power management problem. DSM algorithms are primarily applied to solve the power allocation problem in DSM networks with the aim of maximising the system attribute rather than meeting specific requirements. Also, a powerful PMD algorithm known as sequential matrix diagonalisation (SMD) is used for analysing the eigenvalue decomposition problem by quantifying the available system resource including the effects of the crosstalk and its parameters. This analysis is carried out through joint precoding and equalisation structures. The thesis also investigates dynamic interference mitigation strategies for improving the performance of DSL networks. Two different mitigation strategies through a decision feedback equalisation (DFE) criterion are considered, including zero-forcing (ZF) and minimum mean square error (MMSE) equalisers. The difference between ZF and MMSE equalisations is analysed. Some experimental simulation results demonstrate the performance of both ZF and MMSE equalisation under the DFE equalisation constraint settings. Model reduction on the MMSE equalisation is thus applied to balance the crosstalk interference and enhance the data-rate throughput. Finally, the thesis studies a multi-user MIMO problem under the utility maximisation framework. Simulation results illustrate that the power allocation of multi-user DSL transmission can be jointly controlled and the interference can often be mitigated optimally on a single user basis. Driven by imperfect CSI information in current DSL networks, the research presents a novel DSM method that allows not only crosstalk mitigation, but also the exploitation of crosstalk environments through the fielding of versatile, flexible and evolvable systems. The proposed DSM tool is presented to achieve a robust mitigating system in any arbitrary overdetermined multi-user MIMO environment. Numerical optimisation results show that the mitigation of crosstalk impairment using the proposed DSM strategy. The design and implementation of the proposed DSM are carried out in the environment of MATLAB

    Analysis of MIMO Communications Systems Based on Experimentally Observed Channels

    Get PDF
    This thesis presents an analysis of multiple-input/multiple-output (MIMO) communications systems where the objective is to provide a unified solution to the problems of (i) crosstalk coupling in transmission line channels (ii) multi-path fading in the time variant high frequency wireless channel. In the case of transmission line channels, a comparative analysis is presented of the performance of MIMO communications systems based on balanced CAT 5 twisted-pair transmission lines, balanced twisted-pair telephone transmission lines scheme as well as unbalanced flat-pair transmission lines. The unbalanced flat-pair transmission lines are viewed as a model for digital subscriber lines (DSLs) which may be deemed out-of-range for high speed internet connections because of the circumstances of poor balance, high insertion losses and high degrees of crosstalk. This comparative analysis is then extended to examine effect of imperfect knowledge of the transmission line channels on MIMO communications system performance. In the case of wireless channels, an analysis is presented which investigates the effect of both the Rayleigh and Ricean channels on MIMO communications system performance. Again the analysis of the wireless channels is extended to examine the effect of imperfect knowledge of the channel on MIMO communications systems performance. All of the analyses in this work are based on experimentally observed channels. In the case of the transmission line channels, it is concluded that MIMO communications systems do offer the possibility of high speed internet connectivity on transmission lines that, hereto, would have been considered out-of-range for such services. Considering the CAT 5 transmission line channels, it is concluded that the MIMO communications system provide enhancement at frequencies above 50 MHz and therefore the possibly of extending length and coverage above the standard 100 metres is proposed. On the other hand, the improved performance of the twisted-pair telephone transmission lines is consistent over the range from 300 kHz to 100 MHz when the MIMO system is applied. For all the transmission line channels that are examined, the extent of imperfect knowledge of the channel that can be allowed while maintaining a reasonable MIMO communications system performance is indicated. In the case of the wireless channels, it is concluded that MIMO communications system performance is better in the case of Rayleigh channel than in the case of Ricean channel provided that the degree of correlation of the multi-path channel impulse response components is equivalent. Also, as the number of transmitters and receivers, N T, increases the effect of a given degree of imperfect knowledge of the wireless channel becomes more detrimental on MIMO communication system performance. This work thus indicates the extent of imperfect knowledge of the wireless channel that can be allowed while maintaining a reasonable MIMO communications system performance. The trade-off between increased capacity gain and decreased accuracy of knowledge of the channel as the dimension, N T, was increased is highlighted

    Network information theory for classical-quantum channels

    Full text link
    Network information theory is the study of communication problems involving multiple senders, multiple receivers and intermediate relay stations. The purpose of this thesis is to extend the main ideas of classical network information theory to the study of classical-quantum channels. We prove coding theorems for quantum multiple access channels, quantum interference channels, quantum broadcast channels and quantum relay channels. A quantum model for a communication channel describes more accurately the channel's ability to transmit information. By using physically faithful models for the channel outputs and the detection procedure, we obtain better communication rates than would be possible using a classical strategy. In this thesis, we are interested in the transmission of classical information, so we restrict our attention to the study of classical-quantum channels. These are channels with classical inputs and quantum outputs, and so the coding theorems we present will use classical encoding and quantum decoding. We study the asymptotic regime where many copies of the channel are used in parallel, and the uses are assumed to be independent. In this context, we can exploit information-theoretic techniques to calculate the maximum rates for error-free communication for any channel, given the statistics of the noise on that channel. These theoretical bounds can be used as a benchmark to evaluate the rates achieved by practical communication protocols. Most of the results in this thesis consider classical-quantum channels with finite dimensional output systems, which are analogous to classical discrete memoryless channels. In the last chapter, we will show some applications of our results to a practical optical communication scenario, in which the information is encoded in continuous quantum degrees of freedom, which are analogous to classical channels with Gaussian noise.Comment: Ph.D. Thesis, McGill University, School of Computer Science, July 2012, 223 pages, 18 figures, 36 TikZ diagram
    corecore