Simulation of an electrophotographic halftone reproduction

The robustness of three digital halftoning techniques are simulated for a hypothetical electrophotographic laser printer subjected to dynamic environmental conditions over a copy run of one thousand images. Mathematical electrophotographic models have primarily concentrated on solid area reproductions under time-invariant conditions. The models used in this study predict the behavior of complex image distributions at various stages in the electrophotographic process. The system model is divided into seven subsystems: Halftoning, Laser Exposure, Photoconductor Discharge, Toner Development, Transfer, Fusing, and Image Display. Spread functions associated with laser spot intensity, charge migration, and toner transfer and fusing are used to predict the electrophotographic system response for continuous and halftone reproduction. Many digital halftoning techniques have been developed for converting from continuous-tone to binary (halftone) images. The general objective of halftoning is to approximate the intermediate gray levels of continuous tone images with a binary (black-and-white) imaging system. Three major halftoning techniques currently used are Ordered-Dither, Cluster-Dot, and Error Diffusion. These halftoning algorithms are included in the simulation model. Simulation in electrophotography can be used to better understand the relationship between electrophotographic parameters and image quality, and to observe the effects of time-variant degradation on electrophotographic parameters and materials. Simulation programs, written in FORTRAN and SLAM (Simulation Language Alternative Modeling), have been developed to investigate the effects of system degradation on halftone image quality. The programs have been designed for continuous simulation to characterize the behavior or condition of the electrophotographic system. The simulation language provides the necessary algorithms for obtaining values for the variables described by the time-variant equations, maintaining a history of values during the simulation run, and reporting statistical information on time-dependent variables. Electrophotographic variables associated with laser intensity, initial photoconductor surface voltage, and residual voltage are degraded over a simulated run of one thousand copies. These results are employed to predict the degraded electrophotographic system response and to investigate the behavior of the various halftone techniques under dynamic system conditions. Two techniques have been applied to characterize halftone image quality: Tone Reproduction Curves are used to characterize and record the tone reproduction capability of an electrophotographic system over a simulated copy run. Density measurements are collected and statistical inferences drawn using SLAM. Typically the sharpness of an image is characterized by a system modulation transfer function (MTF). The mathematical models used to describe the subsystem transforms of an electrophotographic system involve non-linear functions. One means for predicting this non-linear system response is to use a Chirp function as the input to the model and then to compare the reproduced modulation to that of the original. Since the imaging system is non-linear, the system response cannot be described by an MTF, but rather an Input Response Function. This function was used to characterize the robustness of halftone patterns at various frequencies. Simulated images were also generated throughout the simulation run and used to evaluate image sharpness and resolution. The data, generated from each of the electrophotographic simulation models, clearly indicates that image stability and image sharpness is not influenced by dot orientation, but rather by the type of halftoning operation used. Error-Diffusion is significantly more variable than Clustered-Dot and Dispersed-Dot at low to mid densities. However, Error-Diffusion is significantly less variable than the ordered dither patterns at high densities. Also, images generated from Error-Diffusion are sharper than those generated using Clustered-Dot and Dispersed-Dot techniques, but the resolution capability of each of the techniques remained the same and degraded equally for each simulation run

Project Tech Top study of lunar, planetary and solar topography Final report

Data acquisition techniques for information on lunar, planetary, and solar topograph

Laser scanner jitter characterization, page content analysis for optimal rendering, and understanding image graininess

In Chapter 1, the electrophotographic (EP) process is widely used in imaging systems such as laser printers and office copiers. In the EP process, laser scanner jitter is a common artifact that mainly appears along the scan direction due to the condition of polygon facets. Prior studies have not focused on the periodic characteristic of laser scanner jitter in terms of the modeling and analysis. This chapter addresses the periodic characteristic of laser scanner jitter in the mathematical model. In the Fourier domain, we derive an analytic expression for laser scanner jitter in general, and extend the expression assuming a sinusoidal displacement. This leads to a simple closed-form expression in terms of Bessel functions of the first kind. We further examine the relationship between the continuous-space halftone image and the periodic laser scanner jitter. The simulation results show that our proposed mathematical model predicts the phenomenon of laser scanner jitter effectively, when compared to the characterization using a test pattern, which consists of a flat field with 25% dot coverage However, there is some mismatches between the analytical spectrum and spectrum of the processed scanned test target. We improve experimental results by directly estimating the displacement instead of assuming a sinusoidal displacement. This gives a better prediction of the phenomenon of laser scanner jitter. ^ In Chapter 2, we describe a segmentation-based object map correction algorithm, which can be integrated in a new imaging pipeline for laser electrophotographic (EP) printers. This new imaging pipeline incorporates the idea of object-oriented halftoning, which applies different halftone screens to different regions of the page, to improve the overall print quality. In particular, smooth areas are halftoned with a low-frequency screen to provide more stable printing; whereas detail areas are halftoned with a high-frequency screen, since this will better reproduce the object detail. In this case, the object detail also serves to mask any print defects that arise from the use of a high frequency screen. These regions are defined by the initial object map, which is translated from the page description language (PDL). However, the information of object type obtained from the PDL may be incorrect. Some smooth areas may be labeled as raster causing them to be halftoned with a high frequency screen, rather than being labeled as vector, which would result in them being rendered with a low frequency screen. To correct the misclassification, we propose an object map correction algorithm that combines information from the incorrect object map with information obtained by segmentation of the continuous-tone RGB rasterized page image. Finally, the rendered image can be halftoned by the object-oriented halftoning approach, based on the corrected object map. Preliminary experimental results indicate the benefits of our algorithm combined with the new imaging pipeline, in terms of correction of misclassification errors. ^ In Chapter 3, we describe a study to understand image graininess. With the emergence of the high-end digital printing technologies, it is of interest to analyze the nature and causes of image graininess in order to understand the factors that prevent high-end digital presses from achieving the same print quality as commercial offset presses. We want to understand how image graininess relates to the halftoning technology and marking technology. This chapter provides three different approaches to understand image graininess. First, we perform a Fourier-based analysis of regular and irregular periodic, clustered-dot halftone textures. With high-end digital printing technology, irregular screens can be considered since they can achieve a better approximation to the screen sets used for commercial offset presses. This is due to the fact that the elements of the periodicity matrix of an irregular screen are rational numbers, rather than integers, which would be the case for a regular screen. From the analytical results, we show that irregular halftone textures generate new frequency components near the spectrum origin; and these frequency components are low enough to be visible to the human viewer. However, regular halftone textures do not have these frequency components. In addition, we provide a metric to measure the nonuniformity of a given halftone texture. The metric indicates that the nonuniformity of irregular halftone textures is higher than the nonuniformity of regular halftone textures. Furthermore, a method to visualize the nonuniformity of given halftone textures is described. The analysis shows that irregular halftone textures are grainier than regular halftone textures. Second, we analyze the regular and irregular periodic, clustered-dot halftone textures by calculating three spatial statistics. First, the disparity between lattice points generated by the periodicity matrix, and centroids of dot clusters are considered. Next, the area of dot clusters in regular and irregular halftone textures is considered. Third, the compactness of dot clusters in the regular and irregular halftone textures is calculated. The disparity of between centroids of irregular dot clusters and lattices points generated by the irregular screen is larger than the disparity of between centroids of regular dot clusters and lattices points generated by the regular screen. Irregular halftone textures have higher variance in the histogram of dot-cluster area. In addition, the compactness measurement shows that irregular dot clusters are less compact than regular dot clusters. But, a clustered-dot halftone algorithm wants to produce clustered-dot as compact as possible. Lastly, we exam the current marking technology by printing the same halftone pattern on different substrates, glossy and polyester media. The experimental results show that the current marking technology provides better print quality on glossy media than on polyester media. With above three different approaches, we conclude that the current halftoning technology introduces image graininess in the spatial domain because of the non-integer elements in the periodicity matrix of the irregular screen and the finite addressability of the marking engine. In addition, the geometric characteristics of irregular dot clusters is more irregular than the geometric characteristics of regular dot clusters. Finally, the marking technology provides inconsistency of print quality between substrates

Estimating toner usage with laser electrophotographic printers, and object map generation from raster input image

Accurate estimation of toner usage is an area of on-going importance for laser, electrophotographic (EP) printers. In Part 1, we propose a new two-stage approach in which we first predict on a pixel-by-pixel basis, the absorptance from printed and scanned pages. We then form a weighted sum of these pixel values to predict overall toner usage on the printed page. The weights are chosen by least-squares regression to toner usage measured with a set of printed test pages. Our two-stage predictor significantly outperforms existing methods that are based on a simple pixel counting strategy in terms of both accuracy and robustness of the predictions.^ In Part 2, we describe a raster-input-based object map generation algorithm (OMGA) for laser, electrophotographic (EP) printers. The object map is utilized in the object-oriented halftoning approach, where different halftone screens and color maps are applied to different types of objects on the page in order to improve the overall printing quality. The OMGA generates object map from the raster input directly. It solves problems such as the object map obtained from the page description language (PDL) is incorrect, and an initial object map is unavailable from the processing pipeline. A new imaging pipeline for the laser EP printer incorporating both the OMGA and the object-oriented halftoning approach is proposed. The OMGA is a segmentation-based classification approach. It first detects objects according to the edge information, and then classifies the objects by analyzing the feature values extracted from the contour and the interior of each object. The OMGA is designed to be hardware-friendly, and can be implemented within two passes through the input document

Effects of exposure on the printing characteristics of the association product process

The investigation examined the printing characteristics of the association product plate, a continuous tone lithographic process which utilizes a synthetic, light-sensitive coating variably ink-receptive according to the degree of exposure it receives. The methodology was designed to determine (1) the printing range of the plate, (2) the effective sensitivity of the coating to varying amounts of exposure within this range, and (3) the degree to which adherence to ideal tone reproduction could be achieved through systematic variation of exposure. The plate is not commercially available, therefore it was necessary to consult patent literature and prior research to obtain details of the coating composition and plate manufacture. A number of pre-trial tests were conducted to optimize the manufacturing process and achieve a desirable balance of coating resiliency and printability. After optimizing plate manufacture, equal-interval continuous tone gray scales were printed on a conventional lithographic press to determine the printing characteristics of the plate. The characteristic curves which were generated by plotting printed densities against negative densities revealed low highlight contrast and high midtone and shadow contrast within a relatively narrow log exposure range of .75-1.10. Faulty tone reproduction can often be corrected by modifying the contrast gradients of the film negative(s) used for plate exposure. In halftone lithography, this procedure selectively alters dot area to achieve desired print reflectance. In the case of continuous tone processes, tone corrected negatives selectively modify the ink receptivity of the plate coating. VIII In order to test the effects of exposure modulation on the tone reproduction characteristics of the plate, an optical matrix was sensitometrically generated from continuous tone panchromatic film. Various film development techniques were used to alter negative contrast and obtain gray scales with diverse equal-interval log E increments within the response range of the plate. The matrix was used for exposing plates of similar manufacture to generate print data for analysis. Printed densities obtained from the matrix were used to construct conventional characteristic curves, as well as response profiles relating printed density differences to log exposure increments. A mathematical model of the Jones tone reproduction diagram was used to calculate tone correction factors in terms of relative log exposure and to reconstruct tone corrected negative scales. Printed densities obtained from the test matrix were used to gauge the effect of the corrected scales on tone reproduction. This method, in essence, emulated the Jones-type approach to tone correction in a single print run, thereby reducing manufacturing and printing variables. The data revealed a high degree of success in correcting mid-tone and shadow reproduction through exposure modification. Although some areas of non-linear plate response were persistent, these were primarily due to shortcomings in the methodology rather than plate failure. Optical tone correction of the low highlight contrast was significantly more problematic. Given the relatively short printing range of the plate, the required negative gradient eliminates many original tonal values. Other means physical and/or chemical are required to lengthen the tonal range and raise highlight contrast in order to improve overall plate performance

Test Targets 6.0: A Collaborative effort exploring the use of scientific methods for color imaging and process control

Test Targets is a collection of scholarly papers contributed by faculty, students, and alumni of Rochester Institute of Technology. We realize the importance of having faculty set examples as authors for students to follow. We have a three-course sequence over a time span of a year to prepare students to publish their first articles when completing Tone and Color Analysis, Printing Process Control, and Advanced Color Management. In this instance, Test Targets 6.0 is a part of the course content in the Advanced Color Management course