Performance Analysis of Multistream Receive Spatial Modulation in the MIMO Broadcast Channel

International audienceIn this paper, Multi-Stream Receive-Spatial Modulation (MSR-SM) for application to the Multiple-Input Multiple-Output (MIMO) broadcast channel is introduced and studied. MSR-SM is a closed-loop transmission scheme, which applies the concept of multistream space modulation at the receiver side. An accurate mathematical framework for the evaluation of the Bit Error Rate (BER) is proposed. In addition, the diversity order and coding gain of the new architecture are derived. Note that the proposed analytical framework takes into account both the small-scale fading and the system topology, and is directly applicable to the conventional MIMO broadcast channel. Compared with the state-of-the-art MIMO transmission in the broadcast channel, it is mathematically shown that MSR-SM achieves the same diversity order and a better coding gain, in the high Signal-to-Noise Ratio (SNR) regime. Finally, the proposed mathematical framework and the new findings are validated via Monte Carlo simulation results

Transmit Diversity Assisted Space Shift Keying for Colocated and Distributed/Cooperative MIMO Elements

Space Shift Keying (SSK) modulation is a recently proposed MIMO technique, which activates only a single transmit antenna during each time slot and uses the specific index of the activated transmit antenna to implicitly convey information. Activating a single antenna is beneficial in terms of eliminating the inter-channel interference, and mitigates the peak-to-mean power ratio, while avoiding the need for synchronisation among transmit antennas. However, this benefit is achieved at a sacrifice, since the transmit diversity gain potential of the multiple transmit antennas is not fully exploited in existing SSK assisted systems. Furthermore, a high SSK throughput requires the transmitter to employ a high number of transmit antennas, which is not always practical. Hence, we propose four algorithms, namely open-loop Space Time Space Shift Keying (ST-SSK), closed-loop feedback-aided phase rotation, feedback-aided power allocation, and cooperative ST-SSK, for the sake of achieving a diversity gain. The performance improvements of the proposed schemes are demonstrated by Monte-Carlo simulations for spatially independent Rayleigh fading channels. Their robustness against channel estimation errors is also considered. We advocate the proposed ST-SSK techniques, which are capable of achieving a transmit diversity gain of about 10 dB at a BER of 10-5, at a cost of imposing a moderate throughput loss dedicated to a modest feedback overhead. Furthermore, our proposed ST-SSK scheme lends itself to efficient communication, because the deleterious effects of deep shadow fading no longer impose spatial correlation on the signals received by the antennas, which cannot be readily avoided by co-located antenna elements

Exploiting spatial modulation and analog network coding for the design of energy-efficient wireless networks

As the data rate demands of the cellular users increase, together with their number, it is expected that unprecedented capacity demands should be met in wireless networks in the forthcoming years. However, the energy consumption to meet these rates is expected to increase exponentially, according to trends. This can become a serious issue for both the environment, due to CO2 emissions, and the operators, which will have to pay more for electricity. Hence, several energy-efficient solutions have been proposed, such as multiple antenna systems, dynamic spectrum allocation, heterogeneous networks, and Network Coding, to name a few. Based on the above, the aim of this thesis to propose low-complexity and energy-efficient physical layer-based solutions compared to the already existing approaches, without sacrificing the quality of performance. More specifically, the focus is on the technologies of Spatial Modulation and Analog Network Coding. Both schemes offer the so-called multiplexing gain, which means that multiple streams can be transmitted without sacrificing resources, such as bandwidth. As far as Spatial Modulation is concerned, Spatial Modulation-based schemes are proposed that are more energy efficient than state-of-the-art technologies. Regarding Analog Network Coding, we study its implementation in relay-based scenarios and how it compares in terms of energy efficiency with conventional protocols, such as the time-division multiple access protocol. From the obtained results, the conclusion that can be drawn is that depending on the scenario both Spatial Modulation and Analog Network Coding can provide significant energy gains compared to existing technologies without sacrificing performance.A medida que las demandas de velocidad de datos de los usuarios de redes celulares aumentan, así como su número, se espera que las demandas de capacidad sin precedentes se deban cumplir en las redes inalámbricas en los próximos años. Sin embargo, se espera que aumente de forma exponencial el consumo de energía para satisfacer estas tasas, de acuerdo a las tendencias. Esto puede convertirse en un grave problema ambos para el medio ambiente, debido a las emisiones de CO2, y los operadores, que tendrán que pagar más por la electricidad. Por lo tanto, se han propuesto varias soluciones de eficiencia energética, tales como sistemas de múltiples antenas, la asignación de espectro dinámico, redes heterogéneas, y Network Coding, para nombrar unos pocos. Con base en lo anterior, el objetivo de esta tesis es proponer soluciones de baja complejidad y de eficiencia energética basadas en la capa física, en comparación con los enfoques ya existentes, sin sacrificar la calidad del funcionamiento. Más específicamente, la atención se centra en las tecnologías de Spatial Modulation y Analog Network Coding. Ambos esquemas ofrecen la llamada ganancia de multiplexación, lo que significa que múltiples flujos pueden ser transmitidos sin sacrificar recursos, tales como el ancho de banda. En lo que se refiere a Spatial Modulation, se proponen esquemas basados en Spatial Modulation que son más energéticamente que tecnologías ya existentes. En cuanto a Analog Network Coding, se estudia su aplicación en escenarios inalámbricos basados en relays y cómo se compara en términos de eficiencia energética con los protocolos convencionales, tales como el protocolo de acceso mútiple por división de tiempo. De los resultados obtenidos, la conclusión que se puede extraer es que dependiendo del escenario, ambos Spatial Modulation y Analog Network Coding pueden proporcionar beneficios significativos de energía en comparación con las tecnologías existentes sin sacrificar el funcionamiento

On the Performance of Multi-Stream Receive Spatial Modulation in the MIMO Broadcast Channel

International audienceIn this paper, a novel architecture for the Multiple-Input Multiple-Output (MIMO) broadcast channel is proposed and studied. The new architecture is based on the concept of Multi- Stream Receive-Spatial Modulation (MSR-SM). MSR-SM is a closed-loop transmission scheme, which applies the concept of multi-stream space modulation at the receiver side. A new and accurate framework for computing the Average Bit Error Probability (ABEP) of the new architecture is proposed. In addition, the new architecture is compared against the state- of-the-art MIMO transmission in the broadcast channel and it is shown to: i) provide superior Bit Error Rate (BER) performance in the high Signal-to-Noise-Ratio (SNR) regime and ii) reduce the signal processing complexity at the transmitter

Alternating Minimization for Wideband Multiuser IRS-Aided MIMO Systems Under Imperfect CSI

© 2023 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TSP.2023.3336166[Abstract]: This work focuses on wideband intelligent reflecting surface (IRS)-aided multiuser MIMO systems. One of the major challenges of this scenario is the joint design of the frequency-dependent base station (BS) precoder and user filters, and the IRS phase-shift matrix which is frequency flat and common to all the users. In addition, we consider that the channel state information (CSI) is imperfect at both the transmitter and the receivers. A statistical model for the imperfect CSI is developed and exploited for the system design. A minimum mean square error (MMSE) approach is followed to determine the IRS phase-shift matrix, the transmit precoders, and the receiving filters. The broadcast (BC)- multiple access channel (MAC) duality is used to solve the optimization problem following an alternating minimization approach. Numerical results show that the proposed approach leads to substantial performance gains with respect to baseline strategies that neglect the inter-user interference and do not optimize the IRS phase-shift matrix. Further performance gains are obtained when incorporating into the system design the statistical information of the channel estimation errors.This work was supported by Grants PID2019-104958RB-C42 (ADELE), PID2022-137099NB-C42 (MADDIE), and BES-2017-081955 funded by MCIN/AEI/10.13039/501100011033. José P. González-Coma thanks the Defense University Center at the Spanish Naval Academy for all the support provided for this research

MIMO signal processing in offset-QAM based filter bank multicarrier systems

Next-generation communication systems have to comply with very strict requirements for increased flexibility in heterogeneous environments, high spectral efficiency, and agility of carrier aggregation. This fact motivates research in advanced multicarrier modulation (MCM) schemes, such as filter bank-based multicarrier (FBMC) modulation. This paper focuses on the offset quadrature amplitude modulation (OQAM)-based FBMC variant, known as FBMC/OQAM, which presents outstanding spectral efficiency and confinement in a number of channels and applications. Its special nature, however, generates a number of new signal processing challenges that are not present in other MCM schemes, notably, in orthogonal-frequency-division multiplexing (OFDM). In multiple-input multiple-output (MIMO) architectures, which are expected to play a primary role in future communication systems, these challenges are intensified, creating new interesting research problems and calling for new ideas and methods that are adapted to the particularities of the MIMO-FBMC/OQAM system. The goal of this paper is to focus on these signal processing problems and provide a concise yet comprehensive overview of the recent advances in this area. Open problems and associated directions for future research are also discussed.Peer ReviewedPostprint (author's final draft