1,570 research outputs found
Link-level simulator for 5G localization
Channel-state-information-based localization in 5G networks has been a
promising way to obtain highly accurate positions compared to previous
communication networks. However, there is no unified and effective platform to
support the research on 5G localization algorithms. This paper releases a
link-level simulator for 5G localization, which can depict realistic physical
behaviors of the 5G positioning signal transmission. Specifically, we first
develop a simulation architecture considering more elaborate parameter
configuration and physical-layer processing. The architecture supports the link
modeling at sub-6GHz and millimeter-wave (mmWave) frequency bands.
Subsequently, the critical physical-layer components that determine the
localization performance are designed and integrated. In particular, a
lightweight new-radio channel model and hardware impairment functions that
significantly limit the parameter estimation accuracy are developed. Finally,
we present three application cases to evaluate the simulator, i.e.
two-dimensional mobile terminal localization, mmWave beam sweeping, and
beamforming-based angle estimation. The numerical results in the application
cases present the performance diversity of localization algorithms in various
impairment conditions
Hardware Development of an Ultra-Wideband System for High Precision Localization Applications
A precise localization system in an indoor environment has been developed. The developed system is based on transmitting and receiving picosecond pulses and carrying out a complete narrow-pulse, signal detection and processing scheme in the time domain. The challenges in developing such a system include: generating ultra wideband (UWB) pulses, pulse dispersion due to antennas, modeling of complex propagation channels with severe multipath effects, need for extremely high sampling rates for digital processing, synchronization between the tag and receivers’ clocks, clock jitter, local oscillator (LO) phase noise, frequency offset between tag and receivers’ LOs, and antenna phase center variation. For such a high precision system with mm or even sub-mm accuracy, all these effects should be accounted for and minimized.
In this work, we have successfully addressed many of the above challenges and developed a stand-alone system for positioning both static and dynamic targets with approximately 2 mm and 6 mm of 3-D accuracy, respectively. The results have exceeded the state of the art for any commercially available UWB positioning system and are considered a great milestone in developing such technology. My contributions include the development of a picosecond pulse generator, an extremely wideband omni-directional antenna, a highly directive UWB receiving antenna with low phase center variation, an extremely high data rate sampler, and establishment of a non-synchronized UWB system architecture. The developed low cost sampler, for example, can be easily utilized to sample narrow pulses with up to 1000 GS/s while the developed antennas can cover over 6 GHz bandwidth with minimal pulse distortion.
The stand-alone prototype system is based on tracking a target using 4-6 base stations and utilizing a triangulation scheme to find its location in space. Advanced signal processing algorithms based on first peak and leading edge detection have been developed and extensively evaluated to achieve high accuracy 3-D localization. 1D, 2D and 3D experiments have been carried out and validated using an optical reference system which provides better than 0.3 mm 3-D accuracy. Such a high accuracy wireless localization system should have a great impact on the operating room of the future
SYNCHRONIZATION AND RESOURCE ALLOCATION IN DOWNLINK OFDM SYSTEMS
The next generation (4G) wireless systems are expected to provide
universal personal and multimedia communications with seamless connection
and very high rate transmissions and without regard to the users’ mobility and
location. OFDM technique is recognized as one of the leading candidates to
provide the wireless signalling for 4G systems. The major challenges in
downlink multiuser OFDM based 4G systems include the wireless channel, the
synchronization and radio resource management. Thus algorithms are required
to achieve accurate timing and frequency offset estimation and the efficient
utilization of radio resources such as subcarrier, bit and power allocation.
The objectives of the thesis are of two fields. Firstly, we presented the
frequency offset estimation algorithms for OFDM systems. Building our work
upon the classic single user OFDM architecture, we proposed two FFT-based
frequency offset estimation algorithms with low computational complexity.
The computer simulation results and comparisons show that the proposed
algorithms provide smaller error variance than previous well-known algorithm.
Secondly, we presented the resource allocation algorithms for OFDM
systems. Building our work upon the downlink multiuser OFDM architecture,
we aimed to minimize the total transmit power by exploiting the system
diversity through the management of subcarrier allocation, adaptive
modulation and power allocation. Particularly, we focused on the dynamic
resource allocation algorithms for multiuser OFDM system and multiuser
MIMO-OFDM system. For the multiuser OFDM system, we proposed a lowiv
complexity channel gain difference based subcarrier allocation algorithm. For
the multiuser MIMO-OFDM system, we proposed a unit-power based
subcarrier allocation algorithm. These proposed algorithms are all combined
with the optimal bit allocation algorithm to achieve the minimal total transmit
power. The numerical results and comparisons with various conventional nonadaptive
and adaptive algorithmic approaches are provided to show that the
proposed resource allocation algorithms improve the system efficiencies and
performance given that the Quality of Service (QoS) for each user is
guaranteed.
The simulation work of this project is based on hand written codes in the
platform of the MATLAB R2007b
Towards low-cost gigabit wireless systems at 60 GHz
The world-wide availability of the huge amount of license-free spectral space in the 60 GHz band provides wide room for gigabit-per-second (Gb/s) wireless applications. A commercial (read: low-cost) 60-GHz transceiver will, however, provide limited system performance due to the stringent link budget and the substantial RF imperfections. The work presented in this thesis is intended to support the design of low-cost 60-GHz transceivers for Gb/s transmission over short distances (a few meters). Typical applications are the transfer of high-definition streaming video and high-speed download. The presented work comprises research into the characteristics of typical 60-GHz channels, the evaluation of the transmission quality as well as the development of suitable baseband algorithms. This can be summarized as follows. In the first part, the characteristics of the wave propagation at 60 GHz are charted out by means of channel measurements and ray-tracing simulations for both narrow-beam and omni-directional configurations. Both line-of-sight (LOS) and non-line-of-sight (NLOS) are considered. This study reveals that antennas that produce a narrow beam can be used to boost the received power by tens of dBs when compared with omnidirectional configurations. Meanwhile, the time-domain dispersion of the channel is reduced to the order of nanoseconds, which facilitates Gb/s data transmission over 60-GHz channels considerably. Besides the execution of measurements and simulations, the influence of antenna radiation patterns is analyzed theoretically. It is indicated to what extent the signal-to-noise ratio, Rician-K factor and channel dispersion are improved by application of narrow-beam antennas and to what extent these parameters will be influenced by beam pointing errors. From both experimental and analytical work it can be concluded that the problem of the stringent link-budget can be solved effectively by application of beam-steering techniques. The second part treats wideband transmission methods and relevant baseband algorithms. The considered schemes include orthogonal frequency division multiplexing (OFDM), multi-carrier code division multiple access (MC-CDMA) and single carrier with frequency-domain equalization (SC-FDE), which are promising candidates for Gb/s wireless transmission. In particular, the optimal linear equalization in the frei quency domain and associated implementation issues such as synchronization and channel estimation are examined. Bit error rate (BER) expressions are derived to evaluate the transmission performance. Besides the linear equalization techniques, a low-complexity inter-symbol interference cancellation technique is proposed to achieve much better performance of code-spreading systems such as MC-CDMA and SC-FDE. Both theoretical analysis and simulations demonstrate that the proposed scheme offers great advantages as regards both complexity and performance. This makes it particularly suitable for 60-GHz applications in multipath environments. The third part treats the influence of quantization and RF imperfections on the considered transmission methods in the context of 60-GHz radios. First, expressions for the BER are derived and the influence of nonlinear distortions caused by the digital-to-analog converters, analog-to-digital converters and power amplifiers on the BER performance is examined. Next, the BER performance under the influence of phase noise and IQ imbalance is evaluated for the case that digital compensation techniques are applied in the receiver as well as for the case that such techniques are not applied. Finally, a baseline design of a low-cost Gb/s 60-GHz transceiver is presented. It is shown that, by application of beam-steering in combination with SC-FDE without advanced channel coding, a data rate in the order of 2 Gb/s can be achieved over a distance of 10 meters in a typical NLOS indoor scenario
Joint Satellite-Transmitter and Ground-Receiver Digital Pre-Distortion for Active Phased Arrays in LEO Satellite Communications
A novel joint satellite-transmitter and ground-receiver (JSG) digital pre-distortion (DPD) (JSG-DPD) technique is proposed to improve the linearity and power efficiency of the space-borne active phased arrays (APAs) in low Earth orbit (LEO) satellite communications. Different from the conventional DPD technique that requires a complex RF feedback loop, the DPD coefficients based on a generalized memory polynomial (GMP) model are extracted at the ground-receiver and then transmitted to the digital baseband front-end of the LEO satellite-transmitter via a satellite–ground bi-directional transmission link. The issue of the additive white Gaussian noise (AWGN) of the satellite–ground channel affecting the extraction of DPD coefficients is tackled using a superimposing training sequences (STS) method. The proposed technique has been experimentally verified using a 28 GHz phased array. The performance improvements in terms of error vector amplitude (EVM) and adjacent channel power ratio (ACPR) are 7.5% and 3.6 dB, respectively. Requiring limited space-borne resources, this technique offers a promising solution to achieve APA DPD for LEO satellite communications
- …