Shuttle Ku-band signal design study

Carrier synchronization and data demodulation of Unbalanced Quadriphase Shift Keyed (UQPSK) Shuttle communications' signals by optimum and suboptimum methods are discussed. The problem of analyzing carrier reconstruction techniques for unbalanced QPSK signal formats is addressed. An evaluation of the demodulation approach of the Ku-Band Shuttle return link for UQPSK when the I-Q channel power ratio is large is carried out. The effects that Shuttle rocket motor plumes have on the RF communications are determined also. The effect of data asymmetry on bit error probability is discussed

Signal design and Theoretical bounds for Time-Of-Arrival estimation in GNSS applications

Positioning accuracy in satellite navigation systems depends on time-delay estimation (TDE) between satellite transmitted codes and local receiver replicas. This thesis is specifically focused on the problem of improving time delay estimation (TDE) accuracy of SS signals, focusing on the fundamental issue of estimation theory and on the properties of the transmitted signal. TDE fundamentals limits are deeply investigated, encompassing the Cram´er Rao Bound and the Ziv-Zakai Bound, and their modified versions to lighten their computation in presence of unknown parameters, in addiction to the time delay. The adoption of the ZZB as benchmark for both acquisition and tracking stage performance is addressed, analyzing innovative or standard signalling waveforms such as Galileo SIS. The main contributions of this thesis are dealt with the analysis of applicability of spread spectrum continuous phase-modulated (SS-CPM) and spread spectrum filtered multitone (SS-FMT) as ranging signals. A special subset of CPM, labeled as “Semi-integer MSK (SiMSK)” obtained by properly setting the modulation parameters, is revealed easily adaptable to the requirements on emissions, intrinsically constant envelope and spectral efficient, while still allowing good tracking performance. Besides, an ad hoc encoding of the SS-SiMSK enables the design of a constant envelope signal bearing two different rate services, without any approximation at the transmitter side. The analysis of the multicarrier (MC) signal revealed the high degree of freedom in its design, proposing the special Filtered Multitone (FMT) modulation as possible candidate for ranging signals. The strictly bandlimited property and the full spectral flexibility possessed by the FMT are exploited in some cases of study to adapt the system to channel conditions or in particular to emulate existing or innovative spectra. For both the SSCPM and SS-FMT modulation schemes investigated, some estimation algorithms are tested and their performance are compared to the correspondent theoretical bound

Infrared ranging in multipath environments for indoor localization of mobile targets

Esta tesis aborda el problema de la medida de diferencias de distancia mediante señales ópticas afectadas por multicamino, aplicada a la localización de agentes móviles en espacios interiores. Los avances en robótica, entornos inteligentes y vehículos autónomos han creado un campo de aplicación específico para la localización en interiores, cuyos requerimientos de precisión (en el rango de los cm) son muy superiores a los demandados por las aplicaciones de localización orientadas a personas, en cuyo contexto se han desarrollado la mayor parte de las alternativas tecnológicas. La investigación con métodos de geometría proyectiva basados en cámaras y de multilateración basados en medida de distancia con señales de radiofrecuencia de banda ancha, de ultrasonido y ópticas han demostrado un rendimiento potencial adecuado para cubrir estos requerimientos. Sin embargo, todas estas alternativas, aún en fase de investigación, presentan dificultades que limitan su aplicación práctica. En el caso de los sistemas ópticos, escasamente estudiados en este contexto, los trabajos previos se han basado en medidas de diferencia de fase de llegada de señales infrarrojas moduladas sinusoidalmente en intensidad. Una infraestructura centralizada computa medidas diferenciales, entre receptores fijos, de la señal emitida desde el móvil a posicionar, y calcula la posición del móvil mediante trilateración hiperbólica a partir de éstas. Estas investigaciones demostraron que se pueden alcanzar precisiones de pocos centímetros; sin embargo, las interferencias por multicamino debidas a la reflexión de la señal óptica en superficies del entorno pueden degradar esta precisión hasta las decenas de centímetros dependiendo de las características del espacio. Así pues, el efecto del multicamino es actualmente la principal fuente de error en esta tecnología, y por tanto, la principal barrera a superar para su implementación en situaciones reales. En esta tesis se propone y analiza un sistema de medida con señales ópticas que permite obtener estimaciones de diferencias de distancia precisas reduciendo el efecto crítico del multicamino. El sistema propuesto introduce una modulación con secuencias de ruido pseudoaleatorio sobre la modulación sinusoidal típicamente usada para medida de fase por onda continua, y aprovecha las propiedades de ensanchamiento en frecuencia de estas secuencias para reducir el efecto del multicamino. El sistema, que realiza una doble estimación de tiempo y fase de llegada, está compuesto por una etapa de sincronización que posibilita la demodulación parcialmente coherente de la señal recibida, seguida de un medidor diferencial de fase sobre las componentes desensanchadas tras la demodulación. Las condiciones de multicamino óptico típicas en espacios interiores, con una componente de camino directo claramente dominante, permiten que el proceso de demodulación recupere más potencia del camino directo que del resto de contribuciones, reduciendo el efecto del multicamino en la estimación final. Los resultados obtenidos demuestran que la aplicación del método propuesto permitiría realizar posicionamiento a partir de señales ópticas con el rendimiento adecuando para aplicaciones de robótica y guiado de vehículos en espacios interiores; además, el progresivo aumento de la potencia y el ancho de banda de los dispositivos optoelectrónicos disponibles permite esperar un incremento considerable de las prestaciones de la propuesta en los próximos años

Estimation of Sparse MIMO Channels with Common Support

We consider the problem of estimating sparse communication channels in the MIMO context. In small to medium bandwidth communications, as in the current standards for OFDM and CDMA communication systems (with bandwidth up to 20 MHz), such channels are individually sparse and at the same time share a common support set. Since the underlying physical channels are inherently continuous-time, we propose a parametric sparse estimation technique based on finite rate of innovation (FRI) principles. Parametric estimation is especially relevant to MIMO communications as it allows for a robust estimation and concise description of the channels. The core of the algorithm is a generalization of conventional spectral estimation methods to multiple input signals with common support. We show the application of our technique for channel estimation in OFDM (uniformly/contiguous DFT pilots) and CDMA downlink (Walsh-Hadamard coded schemes). In the presence of additive white Gaussian noise, theoretical lower bounds on the estimation of SCS channel parameters in Rayleigh fading conditions are derived. Finally, an analytical spatial channel model is derived, and simulations on this model in the OFDM setting show the symbol error rate (SER) is reduced by a factor 2 (0 dB of SNR) to 5 (high SNR) compared to standard non-parametric methods - e.g. lowpass interpolation.Comment: 12 pages / 7 figures. Submitted to IEEE Transactions on Communicatio

MMSE multiuser detection for array multicarrier DS-CDMA in fading channels

Published versio

High-resolution sinusoidal analysis for resolving harmonic collisions in music audio signal processing

Many music signals can largely be considered an additive combination of multiple sources, such as musical instruments or voice. If the musical sources are pitched instruments, the spectra they produce are predominantly harmonic, and are thus well suited to an additive sinusoidal model. However, due to resolution limits inherent in time-frequency analyses, when the harmonics of multiple sources occupy equivalent time-frequency regions, their individual properties are additively combined in the time-frequency representation of the mixed signal. Any such time-frequency point in a mixture where multiple harmonics overlap produces a single observation from which the contributions owed to each of the individual harmonics cannot be trivially deduced. These overlaps are referred to as overlapping partials or harmonic collisions. If one wishes to infer some information about individual sources in music mixtures, the information carried in regions where collided harmonics exist becomes unreliable due to interference from other sources. This interference has ramifications in a variety of music signal processing applications such as multiple fundamental frequency estimation, source separation, and instrumentation identification. This thesis addresses harmonic collisions in music signal processing applications. As a solution to the harmonic collision problem, a class of signal subspace-based high-resolution sinusoidal parameter estimators is explored. Specifically, the direct matrix pencil method, or equivalently, the Estimation of Signal Parameters via Rotational Invariance Techniques (ESPRIT) method, is used with the goal of producing estimates of the salient parameters of individual harmonics that occupy equivalent time-frequency regions. This estimation method is adapted here to be applicable to time-varying signals such as musical audio. While high-resolution methods have been previously explored in the context of music signal processing, previous work has not addressed whether or not such methods truly produce high-resolution sinusoidal parameter estimates in real-world music audio signals. Therefore, this thesis answers the question of whether high-resolution sinusoidal parameter estimators are really high-resolution for real music signals. This work directly explores the capabilities of this form of sinusoidal parameter estimation to resolve collided harmonics. The capabilities of this analysis method are also explored in the context of music signal processing applications. Potential benefits of high-resolution sinusoidal analysis are examined in experiments involving multiple fundamental frequency estimation and audio source separation. This work shows that there are indeed benefits to high-resolution sinusoidal analysis in music signal processing applications, especially when compared to methods that produce sinusoidal parameter estimates based on more traditional time-frequency representations. The benefits of this form of sinusoidal analysis are made most evident in multiple fundamental frequency estimation applications, where substantial performance gains are seen. High-resolution analysis in the context of computational auditory scene analysis-based source separation shows similar performance to existing comparable methods

Evaluating the Navigation Potential of the National Television System Committee Broadcast Signal

The accuracy and worldwide availability of the Global Positioning System (GPS) make it the dominant system for navigation and precise positioning. Unfortunately, many situations arise in which GPS may not be adequate, e.g., urban navigation. This research evaluates the navigation potential of the National Television System Committee (NTSC) broadcast signal using a time-difference-of-arrival (TDOA) algorithm. TDOA measurements are made using NTSC broadcast signals collected from low and high multipath environments. These measurements are then used to evaluate the severity and dynamic effects of NTSC broadcast multipath signals. Three data reduction algorithms were developed--one that modifies the classical cross-correlation TDOA approach, and two that difference the signals\u27 time-of-arrival at each receiver. Each algorithm was evaluated for consistency and accuracy in each environment. Multipath mitigation was demonstrated using a locally fabricated antenna. Collected NTSC broadcast signal samples reveal TDOA measurement errors ranging from 1 to 200 meters, with typical errors between 10 and 40 meters. Multipath was shown to be the dominant error source. However, errors due to the particular hardware configuration used in this research were also significant. Simple multipath mitigation techniques were able to reduce these errors, and analyses of the received waveforms provide the foundation for developing additional active multipath mitigation techniques. Simulations using eight television station locations near Dayton, Ohio reveal 40 meter position accuracy with the typical range errors found in this research. Extreme measurement errors from high multipath areas reduced this accuracy to 100 meters

Achievable Rate and Modulation for Bandlimited Channels with Oversampling and 1-Bit Quantization at the Receiver

Sustainably realizing applications of the future with high performance demands requires that energy efficiency becomes a central design criterion for the entire system. For example, the power consumption of the analog-to-digital converter (ADC) can become a major factor when transmitting at large bandwidths and carrier frequencies, e.g., for ultra-short range high data rate communication. The consumed energy per conversion step increases with the sampling rate such that high resolution ADCs become unfeasible in the sub-THz regime at the very high sampling rates required. This makes signaling schemes adapted to 1-bit quantizers a promising alternative. We therefore quantify the performance of bandlimited 1-bit quantized wireless communication channels using techniques like oversampling and faster-than-Nyquist (FTN) signaling to compensate for the loss of achievable rate. As a limiting case, we provide bounds on the mutual information rate of the hard bandlimited 1-bit quantized continuous-time – i.e., infinitely oversampled – additive white Gaussian noise channel in the mid-to-high signal-to-noise ratio (SNR) regime. We derive analytic expressions using runlength encoded input signals. For real signals the maximum value of the lower bound on the spectral efficiency in the high-SNR limit was found to be approximately 1.63 bit/s/Hz. Since in practical scenarios the oversampling ratio remains finite, we derive bounds on the achievable rate of the bandlimited oversampled discrete-time channel. These bounds match the results of the continuous-time channel remarkably well. We observe spectral efficiencies up to 1.53 bit/s/Hz in the high-SNR limit given hard bandlimitation. When excess bandwidth is tolerable, spectral efficiencies above 2 bit/s/Hz per domain are achievable w.r.t. the 95 %-power containment bandwidth. Applying the obtained bounds to a bandlimited oversampled 1-bit quantized multiple-input multiple-output channel, we show the benefits when using appropriate power allocation schemes. As a constant envelope modulation scheme, continuous phase modulation is considered in order to relieve linearity requirements on the power amplifier. Noise-free performance limits are investigated for phase shift keying (PSK) and continuous phase frequency shift keying (CPFSK) using higher-order modulation alphabets and intermediate frequencies. Adapted waveforms are designed that can be described as FTN-CPFSK. With the same spectral efficiency in the high-SNR limit as PSK and CPFSK, these waveforms provide a significantly improved bit error rate (BER) performance. The gain in SNR required for achieving a certain BER can be up to 20 dB.Die nachhaltige Realisierung von zukünftigen Übertragungssystemen mit hohen Leistungsanforderungen erfordert, dass die Energieeffizienz zu einem zentralen Designkriterium für das gesamte System wird. Zum Beispiel kann die Leistungsaufnahme des Analog-Digital-Wandlers (ADC) zu einem wichtigen Faktor bei der Übertragung mit großen Bandbreiten und Trägerfrequenzen werden, z. B. für die Kommunikation mit hohen Datenraten über sehr kurze Entfernungen. Die verbrauchte Energie des ADCs steigt mit der Abtastrate, so dass hochauflösende ADCs im Sub-THz-Bereich bei den erforderlichen sehr hohen Abtastraten schwer einsetzbar sind. Dies macht Signalisierungsschemata, die an 1-Bit-Quantisierer angepasst sind, zu einer vielversprechenden Alternative. Wir quantifizieren daher die Leistungsfähigkeit von bandbegrenzten 1-Bit-quantisierten drahtlosen Kommunikationssystemen, wobei Techniken wie Oversampling und Faster-than-Nyquist (FTN) Signalisierung eingesetzt werden, um den durch Quantisierung verursachten Verlust der erreichbaren Rate auszugleichen. Wir geben Grenzen für die Transinformationsrate des Extremfalls eines strikt bandbegrenzten 1-Bit quantisierten zeitkontinuierlichen – d.h. unendlich überabgetasteten – Kanals mit additivem weißen Gauß’schen Rauschen bei mittlerem bis hohem Signal-Rausch-Verhältnis (SNR) an. Wir leiten analytische Ausdrücke basierend auf lauflängencodierten Eingangssignalen ab. Für reelle Signale ist der maximale Wert der unteren Grenze der spektralen Effizienz im Hoch-SNR-Bereich etwa 1,63 Bit/s/Hz. Da die Überabtastrate in praktischen Szenarien endlich bleibt, geben wir Grenzen für die erreichbare Rate eines bandbegrenzten, überabgetasteten zeitdiskreten Kanals an. Diese Grenzen stimmen mit den Ergebnissen des zeitkontinuierlichen Kanals bemerkenswert gut überein. Im Hoch-SNR-Bereich sind spektrale Effizienzen bis zu 1,53 Bit/s/Hz bei strikter Bandbegrenzung möglich. Wenn Energieanteile außerhalb des Frequenzbandes tolerierbar sind, können spektrale Effizienzen über 2 Bit/s/Hz pro Domäne – bezogen auf die Bandbreite, die 95 % der Energie enthält – erreichbar sein. Durch die Anwendung der erhaltenen Grenzen auf einen bandbegrenzten überabgetasteten 1-Bit quantisierten Multiple-Input Multiple-Output-Kanal zeigen wir Vorteile durch die Verwendung geeigneter Leistungsverteilungsschemata. Als Modulationsverfahren mit konstanter Hüllkurve betrachten wir kontinuierliche Phasenmodulation, um die Anforderungen an die Linearität des Leistungsverstärkers zu verringern. Beschränkungen für die erreichbare Datenrate bei rauschfreier Übertragung auf Zwischenfrequenzen mit Modulationsalphabeten höherer Ordnung werden für Phase-shift keying (PSK) and Continuous-phase frequency-shift keying (CPFSK) untersucht. Weiterhin werden angepasste Signalformen entworfen, die als FTN-CPFSK beschrieben werden können. Mit der gleichen spektralen Effizienz im Hoch-SNR-Bereich wie PSK und CPFSK bieten diese Signalformen eine deutlich verbesserte Bitfehlerrate (BER). Die Verringerung des erforderlichen SNRs zur Erreichung einer bestimmten BER kann bis zu 20 dB betragen

MIMO-OFDM communication systems: channel estimation and wireless location

In this new information age, high data rate and strong reliability features our wireless communication systems and is becoming the dominant factor for a successful deployment of commercial networks. MIMO-OFDM (multiple input multiple output-orthogonal frequency division multiplexing), a new wireless broadband technology, has gained great popularity for its capability of high rate transmission and its robustness against multi-path fading and other channel impairments. A major challenge to MIMO-OFDM systems is how to obtain the channel state information accurately and promptly for coherent detection of information symbols and channel synchronization. In the first part, this dissertation formulates the channel estimation problem for MIMO-OFDM systems and proposes a pilot-tone based estimation algorithm. A complex equivalent base-band MIMO-OFDM signal model is presented by matrix representation. By choosing equally-spaced and equally-powered pilot tones from sub-carriers in one OFDM symbol, a down-sampled version of the original signal model is obtained. Furthermore, this signal model is transformed into a linear form solvable for the LS (least-square) estimation algorithm. Based on the resultant model, a simple pilot-tone design is proposed in the form of a unitary matrix, whose rows stand for different pilot-tone sets in the frequency domain and whose columns represent distinct transmit antennas in the spatial domain. From the analysis and synthesis of the pilot-tone design in this dissertation, our estimation algorithm can reduce the computational complexity inherited in MIMO systems by the fact that the pilot-tone matrix is essentially a unitary matrix, and is proven an optimal channel estimator in the sense of achieving the minimum MSE (mean squared error) of channel estimation for a fixed power of pilot tones. In the second part, this dissertation addresses the wireless location problem in WiMax (worldwide interoperability for microwave access) networks, which is mainly based on the MIMO-OFDM technology. From the measurement data of TDOA (time difference of arrival), AOA (angle of arrival) or a combination of those two, a quasi-linear form is formulated for an LS-type solution. It is assumed that the observation data is corrupted by a zero-mean AWGN (additive white Gaussian noise) with a very small variance. Under this assumption, the noise term in the quasi-liner form is proved to hold a normal distribution approximately. Hence the ML (maximum-likelihood) estimation and the LS-type solution are equivalent. But the ML estimation technique is not feasible here due to its computational complexity and the possible nonexistence of the optimal solution. Our proposed method is capable of estimating the MS location very accurately with a much less amount of computations. A final result of the MS (mobile station) location estimation, however, cannot be obtained directly from the LS-type solution without bringing in another independent constraint. To solve this problem, the Lagrange multiplier is explored to find the optimal solution to the constrained LS-type optimization problem