Performance of MB-OFDM UWB and WiMAX IEEE 802.16e converged radio-over-fiber in PON

Experimental results about the performance of converged radio-over- fiber transmission including multiband- OFDM UWB and WiMAX 802.16e wireless over a passive optical network are reported in this paper. The experimental study indicates that UWB and WiMAX converged transmission is feasible over the proposed distribution set-up employing a single wavelength. However, the results indicate that there is an EVM penalty of 3.2 dB for a UWB 10 km SSMF transmission in presence of WiMAX wireless

Multiband OFDM for Cognitive Radio – A Way for Cyclostationary Detection and Interference Cancellation

With the tremendous growth in wireless technology there has been a shortage in the spectrum utilized for certain applications while some spectrum remains idle. To overcome this problem and for the efficient utilization of the spectrum cognitive radio is the suitable solution.Multiband OFDM can be easily modeled as cognitive radio, a technology that is employed for utilizing the available spectrum in the most efficient way. Since sensing of the free spectrum for detecting the arrival of the primary users is the foremost job of cognitive, here cyclostationary based spectrum sensing is carried out. Its performance is investigated using universal software defined radio peripheral (USRP) kit which is the hardware test bed for the cognitive radio system. Results are shown using Labview software. Further to mitigate the interference between the primary and cognitive users a modified intrusion elimination (AIC) algorithm had been proposed which in turn ensures the coexistence of both the users in the same wireless environment

Radio channel characterisation and system-level modelling for ultra wideband body-centric wireless communications

PhDThe next generation of wireless communication is evolving towards user-centric networks, where constant and reliable connectivity and services are essential. Bodycentric wireless network (BCWN) is the most exciting and emerging 4G technology for short (1-5 m) and very short (below 1 m) range communication systems. It has got numerous applications including healthcare, entertainment, surveillance, emergency, sports and military. The major difference between the BCWN and conventional wireless systems is the radio channel over which the communication takes place. The human body is a hostile medium from the radio propagation perspective and it is therefore important to understand and characterise the effect of the human body on the antenna elements, the radio propagation channel parameters and hence the system performance. In addition, fading is another concern that affects the reliability and quality of the wireless link, which needs to be taken into account for a low cost and reliable wireless communication system for body-centric networks. The complex nature of the BCWN requires operating wireless devices to provide low power requirements, less complexity, low cost and compactness in size. Apart from these characteristics, scalable data rates and robust performance in most fading conditions and jamming environment, even at low signal to noise ratio (SNR) is needed. Ultra-wideband (UWB) technology is one of the most promising candidate for BCWN as it tends to fulfill most of these requirements. The thesis focuses on the characterisation of ultra wideband body-centric radio propagation channel using single and multiple antenna techniques. Apart from channel characterisation, system level modelling of potential UWB radio transceivers for body-centric wireless network is also proposed. Channel models with respect to large scale and delay analysis are derived from measured parameters. Results and analyses highlight the consequences of static and dynamic environments in addition to the antenna positions on the performance of body-centric wireless communication channels. Extensive measurement i campaigns are performed to analyse the significance of antenna diversity to combat the channel fading in body-centric wireless networks. Various diversity combining techniques are considered in this process. Measurement data are also used to predict the performance of potential UWB systems in the body-centric wireless networks. The study supports the significance of single and multiple antenna channel characterisation and modelling in producing suitable wireless systems for ultra low power body-centric wireless networks.University of Engineering and Technology Lahore Pakista

Design and implementation of frequency synthesizers for 3-10 ghz mulitband ofdm uwb communication

The allocation of frequency spectrum by the FCC for Ultra Wideband (UWB) communications in the 3.1-10.6 GHz has paved the path for very high data rate Gb/s wireless communications. Frequency synthesis in these communication systems involves great challenges such as high frequency and wideband operation in addition to stringent requirements on frequency hopping time and coexistence with other wireless standards. This research proposes frequency generation schemes for such radio systems and their integrated implementations in silicon based technologies. Special emphasis is placed on efficient frequency planning and other system level considerations for building compact and practical systems for carrier frequency generation in an integrated UWB radio. This work proposes a frequency band plan for multiband OFDM based UWB radios in the 3.1-10.6 GHz range. Based on this frequency plan, two 11-band frequency synthesizers are designed, implemented and tested making them one of the first frequency synthesizers for UWB covering 78% of the licensed spectrum. The circuits are implemented in 0.25µm SiGe BiCMOS and the architectures are based on a single VCO at a fixed frequency followed by an array of dividers, multiplexers and single sideband (SSB) mixers to generate the 11 required bands in quadrature with fast hopping in much less than 9.5 ns. One of the synthesizers is integrated and tested as part of a 3-10 GHz packaged receiver. It draws 80 mA current from a 2.5 V supply and occupies an area of 2.25 mm2. Finally, an architecture for a UWB synthesizer is proposed that is based on a single multiband quadrature VCO, a programmable integer divider with 50% duty cycle and a single sideband mixer. A frequency band plan is proposed that greatly relaxes the tuning range requirement of the multiband VCO and leads to a very digitally intensive architecture for wideband frequency synthesis suitable for implementation in deep submicron CMOS processes. A design in 130nm CMOS occupies less than 1 mm2 while consuming 90 mW. This architecture provides an efficient solution in terms of area and power consumption with very low complexity

The performance of the vehicular communication-clustering process

For the new wireless systems and beyond, the intelligent transportation system is considered as one of the main features that could be covered in the new research topics. Furthermore, both high-speed data transmission and data processing play a crucial role for these generations. Our work covers two main propositions in order to attain an improvement in such intelligent systems performance. A clustering algorithm is proposed and presented for grouping mobile nodes based on their speeds with some modified head assignments processes. This will be combined with a parallel-processing technique that enhances the QoS. Mainly, this work concerns enhancing the V2V data transmission and the processing speed. Thus, a wavelet processing stage has been imposed to optimize the transmitted power phenomenon. In order to check the validity of such proposition, five main efficiency factors have been investigated; namely complementary cumulative distributions, bit rates, energy efficiency, the lifetime of cluster head and the ordinary nodes reattaching-head average times.

Study and miniaturisation of antennas for ultra wideband communication systems

PhDWireless communications have been growing with an astonishing rate over the past few years and wireless terminals for future applications are required to provide diverse services. This rising demand prompts the needs for antennas able to cover multiple bandwidths or an ultrawide bandwidth for various systems. Since the release by the Federal Communications Commission (FCC) of a bandwidth of 7.5 GHz (from 3.1 GHz to 10.6 GHz) for ultra wideband (UWB) wireless communications, UWB has been rapidly evolving as a potential wireless technology and UWB antennas have consequently drawn more and more attention from both academia and industries worldwide. Unlike traditional narrow band antennas, design and analysis of UWB antennas are facing more challenges and difficulties. A competent UWB antenna should be capable of operating over an ultra wide bandwidth as assigned by the FCC. At the same time, a small and compact antenna size is highly desired, due to the integration requirement of entire UWB systems. Another key requirement of UWB antennas is the good time domain behaviour, i.e. a good impulse response with minimal distortion. This thesis focuses on UWB antenna miniaturisation and analysis. Studies have been undertaken to cover the aspects of UWB fundamentals and antenna theory. Extensive investigations are also conducted on three different types of miniaturised UWB antennas. 5 The first type of miniaturised UWB antenna studied in this thesis is the loaded orthogonal half disc monopole antenna. An inductive load is introduced to broaden the impedance bandwidth as well as the pattern bandwidth, in other words, an equivalent size reduction is realised. The second type of miniaturised UWB antenna is the printed half disc monopole antenna. By simply halving the original antenna and tuning the width of the coplanar ground plane, a significant more than 50% size reduction is achieved. The third type of miniaturised UWB antenna is the printed quasi-self-complementary antenna. By exploiting a quasi-self-complementary structure and a built-in matching section, a small and compact antenna dimension is achieved. The performances and characteristics of the three types of miniaturised UWB antennas are studied both numerically and experimentally and the design parameters for achieving optimal operation of the antennas are also analysed extensively in order to understand the antenna operations. Also, time domain performance of the Coplanar Waveguide (CPW)-fed disc monopole antenna is examined in this thesis to demonstrate the importance of time domain study on UWB antennas. Over the past few years of my PhD study, I feel honoured and lucky to work with some of the most prestigious researchers in the Department of Electronic Engineering, Queen Mary, University of London. I would like to show my most cordial gratitude to those who have been helping me during the past few years. There would be no any progress without their generous and sincere support. First of all, I would like to thank my supervisors Professor Clive Parini and Professor Xiaodong Chen, for their kind supervision and encouragement. I am impressed by their notable academic background and profound understanding of the subjects, which have proved to be immense benefits to me. It has been my great pleasure and honour to be under their supervision and work with them. Second of all, I would like to thank Mr John Dupuy for his help in the fabrication and measurement of antennas I have designed during my PhD study. Also, a special acknowledgement goes to all of the staff for all the assistance throughout my graduate program

Multiple antenna system and channel estimation for multiband orthogonal frequency division multiplexing in ultra-wideband systems

Multiband Orthogonal Frequency Division Multiplexing (OFDM) has been deployed for practical implementation of low cost and low power Ultra-Wideband (UWB) devices due to its ability to mitigate the narrowband interference and multipath fading effects. In order to achieve high data rates, the deployment of multiple antenna techniques into a UWB system has gained considerable research interest. In a UWB system, both the spatial and multipath diversities exist in UWB system can be exploited via the use of Multiple-Input Multiple-Output (MIMO) antenna system and Space-Time Codes (STC) by leveraging Alamouti scheme. This work shows that MIMO system outperforms Alamouti technique in providing a power combining gain in the receiver. Given that channel estimation for timefrequency multiplexed such as a multiband OFDM system is unexplored largely, this thesis also addresses this issue. In literature, most of the conventional Channel Frequency Response (CFR) estimations require either pre-storing a large matrix or performing real-time matrix inversion. In general, these requirements are prohibitive for practical implementation of UWB devices. In this thesis, the implementation issues of STC-based on Alamouti scheme are investigated for the multiband OFDM system. The research quantifies and analyses existing channel estimation in frequency domain such as Least-Square (LS) and Minimum Mean Square Error (MMSE) techniques. Consequently, low-complexity channel estimation based on Singular Value Decomposition (SVD) technique is developed for multiband OFDM system evaluates under modified Saleh-Valuenzela (S-V) channel modelling represents the realistic wireless indoor environment. This work implies that the SVD technique gives an improvement of 3-5 dB compared to LS technique. Even though SVD performs similarly to MMSE, it managed to reduce significantly the complexity by or to 57.8%

Channel modeling and resource allocation in OFDM systems

The increasing demand for high data rate in wireless communication systems gives rise to broadband communication systems. The radio channel is plagued by multipath propagation, which causes frequency-selective fading in broadband signals. Orthogonal Frequency-Division Multiplexing (OFDM) is a modulation scheme specifically designed to facilitate high-speed data transmission over frequency-selective fading channels. The problem of channel modeling in the frequency domain is first investigated for the wideband and ultra wideband wireless channels. The channel is converted into an equivalent discrete channel by uniformly sampling the continuous channel frequency response (CFR), which results in a discrete CFR. A necessary and sufficient condition is established for the existence of parametric models for the discrete CFR. Based on this condition, we provide a justification for the effectiveness of previously reported autoregressive (AR) models in the frequency domain of wideband and ultra wideband channels. Resource allocation based on channel state information (CSI) is known to be a very powerful method for improving the spectral efficiency of OFDM systems. Bit and power allocation algorithms have been discussed for both static channels, where perfect knowledge of CSI is assumed, and time-varying channels, where the knowledge of CSI is imperfect. In case of static channels, the optimal resource allocation for multiuser OFDM systems has been investigated. Novel algorithms are proposed for subcarrier allocation and bit-power allocation with considerably lower complexity than other schemes in the literature. For time-varying channel, the error in CSI due to channel variation is recognized as the main obstacle for achieving the full potential of resource allocation. Channel prediction is proposed to suppress errors in the CSI and new bit and power allocation schemes incorporating imperfect CSI are presented and their performance is evaluated through simulations. Finally, a maximum likelihood (ML) receiver for Multiband Keying (MBK) signals is discussed, where MBK is a modulation scheme proposed for ultra wideband systems (UWB). The receiver structure and the associated ML decision rule is derived through analysis. A suboptimal algorithm based on a depth-first tree search is introduced to significantly reduce the computational complexity of the receiver

Performance analysis of power amplifier back-off levels in UWB transmitters

This paper focuses on the interplay between data throughput and battery duration in UWB units, both of which the most perceptible at the user’ level. The potential benefits of enlarging the power amplifier back-off (linearity) are assessed for different channel conditions according to a communication system following the IEEE 802.15. 3a standard (MB-OFDM proposal). New performance results are presented which highlight the kinds of channels where an increase in transmit linearity (power amplifier back-off enlargement) yields increased data throughput, and those where it does not. Results show whether designs sacrificing power efficiency have a benefit in data rate increase or it is simply a power spoil (ineffective reduction of battery’s timeof- life).Peer Reviewe