Tactile-STAR: A Novel Tactile STimulator And Recorder System for Evaluating and Improving Tactile Perception

Many neurological diseases impair the motor and somatosensory systems. While several different technologies are used in clinical practice to assess and improve motor functions, somatosensation is evaluated subjectively with qualitative clinical scales. Treatment of somatosensory deficits has received limited attention. To bridge the gap between the assessment and training of motor vs. somatosensory abilities, we designed, developed, and tested a novel, low-cost, two-component (bimanual) mechatronic system targeting tactile somatosensation: the Tactile-STAR—a tactile stimulator and recorder. The stimulator is an actuated pantograph structure driven by two servomotors, with an end-effector covered by a rubber material that can apply two different types of skin stimulation: brush and stretch. The stimulator has a modular design, and can be used to test the tactile perception in different parts of the body such as the hand, arm, leg, big toe, etc. The recorder is a passive pantograph that can measure hand motion using two potentiometers. The recorder can serve multiple purposes: participants can move its handle to match the direction and amplitude of the tactile stimulator, or they can use it as a master manipulator to control the tactile stimulator as a slave. Our ultimate goal is to assess and affect tactile acuity and somatosensory deficits. To demonstrate the feasibility of our novel system, we tested the Tactile-STAR with 16 healthy individuals and with three stroke survivors using the skin-brush stimulation. We verified that the system enables the mapping of tactile perception on the hand in both populations. We also tested the extent to which 30 min of training in healthy individuals led to an improvement of tactile perception. The results provide a first demonstration of the ability of this new system to characterize tactile perception in healthy individuals, as well as a quantification of the magnitude and pattern of tactile impairment in a small cohort of stroke survivors. The finding that short-term training with Tactile-STARcan improve the acuity of tactile perception in healthy individuals suggests that Tactile-STAR may have utility as a therapeutic intervention for somatosensory deficits

Vibration Propagation on the Skin of the Arm

Vibrotactile interfaces are an inexpensive and non-invasive way to provide performance feedback to body-machine interface users. Interfaces for the upper extremity have utilized a multi-channel approach using an array of vibration motors placed on the upper extremity. However, for successful perception of multi-channel vibrotactile feedback on the arm, we need to account for vibration propagation across the skin. If two stimuli are delivered within a small distance, mechanical propagation of vibration can lead to inaccurate perception of the distinct vibrotactile stimuli. This study sought to characterize vibration propagation across the hairy skin of the forearm. We characterized vibration propagation by measuring accelerations at various distances from a source vibration of variable intensities (100–240 Hz). Our results showed that acceleration from the source vibration was present at a distance of 4 cm at intensities \u3e150 Hz. At distances greater than 8 cm from the source, accelerations were reduced to values substantially below vibrotactile discrimination thresholds for all vibration intensities. We conclude that in future applications of vibrotactile interfaces, stimulation sites should be separated by a distance of at least 8 cm to avoid potential interference in vibration perception caused by propagating vibrations

Engineering data compendium. Human perception and performance. User's guide

The concept underlying the Engineering Data Compendium was the product of a research and development program (Integrated Perceptual Information for Designers project) aimed at facilitating the application of basic research findings in human performance to the design and military crew systems. The principal objective was to develop a workable strategy for: (1) identifying and distilling information of potential value to system design from the existing research literature, and (2) presenting this technical information in a way that would aid its accessibility, interpretability, and applicability by systems designers. The present four volumes of the Engineering Data Compendium represent the first implementation of this strategy. This is the first volume, the User's Guide, containing a description of the program and instructions for its use

Augmenting Sensorimotor Control Using “Goal-Aware” Vibrotactile Stimulation during Reaching and Manipulation Behaviors

We describe two sets of experiments that examine the ability of vibrotactile encoding of simple position error and combined object states (calculated from an optimal controller) to enhance performance of reaching and manipulation tasks in healthy human adults. The goal of the first experiment (tracking) was to follow a moving target with a cursor on a computer screen. Visual and/or vibrotactile cues were provided in this experiment, and vibrotactile feedback was redundant with visual feedback in that it did not encode any information above and beyond what was already available via vision. After only 10 minutes of practice using vibrotactile feedback to guide performance, subjects tracked the moving target with response latency and movement accuracy values approaching those observed under visually guided reaching. Unlike previous reports on multisensory enhancement, combining vibrotactile and visual feedback of performance errors conferred neither positive nor negative effects on task performance. In the second experiment (balancing), vibrotactile feedback encoded a corrective motor command as a linear combination of object states (derived from a linear-quadratic regulator implementing a trade-off between kinematic and energetic performance) to teach subjects how to balance a simulated inverted pendulum. Here, the tactile feedback signal differed from visual feedback in that it provided information that was not readily available from visual feedback alone. Immediately after applying this novel “goal-aware” vibrotactile feedback, time to failure was improved by a factor of three. Additionally, the effect of vibrotactile training persisted after the feedback was removed. These results suggest that vibrotactile encoding of appropriate combinations of state information may be an effective form of augmented sensory feedback that can be applied, among other purposes, to compensate for lost or compromised proprioception as commonly observed, for example, in stroke survivors

Unimanual and Bimanual Weight Perception of Virtual Objects with a new Multi-finger Haptic Interface

Accurate weight perception is important particularly in tasks where the user has to apply vertical forces to ensure safe landing of a fragile object or precise penetration of a surface with a probe. Moreover, depending on physical properties of objects such as weight and size we may switch between unimanual and bimanual manipulation during a task. Research has shown that bimanual manipulation of real objects results in a misperception of their weight: they tend to feel lighter than similarly heavy objects which are handled with one hand only [8]. Effective simulation of bimanual manipulation with desktop haptic interfaces should be able to replicate this effect of bimanual manipulation on weight perception. Here, we present the MasterFinger-2, a new multi-finger haptic interface allowing bimanual manipulation of virtual objects with precision grip and we conduct weight discrimination experiments to evaluate its capacity to simulate unimanual and bimanual weight. We found that the bimanual ‘lighter’ bias is also observed with the MasterFinger-2 but the sensitivity to changes of virtual weights deteriorated

Assessing haptic properties for data representation

This paper describes the results of a series of forced choice design experiments investigating the discrimination of material properties using a PHANToM haptic device. Research has shown that the PHANToM is effective at displaying graphical information to blind people, but the techniques used so far have been very simple. Our experiments showed that subjects' discrimination of friction was significantly better than that of stiffness or the spatial period of sinusoidal textures, over the range of stimuli investigated. Thus, it is proposed that graphical data could be made more easily accessible to blind users by scaling the data values to friction rather than shape or size, as in traditional bar charts

Augmenting Graphical User Interfaces with Haptic Assistance for Motion-Impaired Operators

Haptic assistance is an emerging field of research that is designed to improve human-computer interaction (HCI) by reducing error rates and targeting times through the use of force feedback. Haptic feedback has previously been investigated to assist motion-impaired computer users, however, limitations such as target distracters have hampered its integration with graphical user interfaces (GUIs). In this paper two new haptic assistive techniques are presented that utilise the 3DOF capabilities of the Phantom Omni. These are referred to as deformable haptic cones and deformable virtual switches. The assistance is designed specifically to enable motion-impaired operators to use existing GUIs more effectively. Experiment 1 investigates the performance benefits of the new haptic techniques when used in conjunction with the densely populated Windows on-screen keyboard (OSK). Experiment 2 utilises the ISO 9241-9 point-and-click task to investigate the effects of target size and shape. The results of the study prove that the newly proposed techniques improve interaction rates and can be integrated with existing software without many of the drawbacks of traditional haptic assistance. Deformable haptic cones and deformable virtual switches were shown to reduce the mean number of missed-clicks by at least 75% and reduce targeting times by at least 25%