Tree-Based Multicasting in Wormhole-Routed Irregular Topologies

A deadlock-free tree-based multicast routing algorithm is presented for all direct networks, regardless of interconnection topology. The algorithm delivers a message to any number of destinations using only a single startup phase. In contrast to existing tree-based schemes, this algorithm applies to all interconnection topologies, requires only fixed-sized input buffers that are independent of maximum message length, and uses a single asynchronous flit replication mechanism. The theoretical basis of the technique used here is sufficiently general to develop other tree-based multicasting algorithms for regular and irregular topologies. Simulation results demonstrate that this tree-based algorithm provides a very promising means of achieving very low latency multicast

New Fault Tolerant Multicast Routing Techniques to Enhance Distributed-Memory Systems Performance

Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the ability of the system to operate correctly in the presence of faults. Development of fault tolerant multicast routing algorithms in 2D mesh networks is an important issue. This dissertation presents, new fault tolerant multicast routing algorithms for distributed-memory systems performance using wormhole routed 2D mesh. These algorithms are described for fault tolerant routing in 2D mesh networks, but it can also be extended to other topologies. These algorithms are a combination of a unicast-based multicast algorithm and tree-based multicast algorithms. These algorithms works effectively for the most commonly encountered faults in mesh networks, f-rings, f-chains and concave fault regions. It is shown that the proposed routing algorithms are effective even in the presence of a large number of fault regions and large size of fault region. These algorithms are proved to be deadlock-free. Also, the problem of fault regions overlap is solved. Four essential performance metrics in mesh networks will be considered and calculated; also these algorithms are a limited-global-information-based multicasting which is a compromise of local-information-based approach and global-information-based approach. Data mining is used to validate the results and to enlarge the sample. The proposed new multicast routing techniques are used to enhance the performance of distributed-memory systems. Simulation results are presented to demonstrate the efficiency of the proposed algorithms

Parallel Programming Using Shared Objects and Broadcasting

The two major design approaches taken to build distributed and parallel computer systems, multiprocessing and multicomputing, are discussed. A model that combines the best properties of both multiprocessor and multicomputer systems, easy-to-build hardware, and a conceptually simple programming model is presented. Using this model, a programmer defines and invokes operations on shared objects, the runtime system handles reads and writes on these objects, and the reliable broadcast layer implements indivisible updates to objects using the sequencing protocol. The resulting system is easy to program, easy to build, and has acceptable performance on problems with a moderate grain size in which reads are much more common than writes. Orca, a procedural language whose sequential constructs are roughly similar to languages like C or Modula 2 but which also supports parallel processes and shared objects and has been used to develop applications for the prototype system, is described

Fault-Tolerant Multicasting in Multistage Interconnection Networks

Abstract In this paper, we study fault-toleran

Efficient Multicast Algorithms for Mesh and Torus Networks

With the increasing popularity of multicomputers, efficient way of communication within its processors has become a popular area of research. Multicomputers refer to a computer system that has multiple processors, they have high computational power and they can perform multiple tasks concurrently. Mesh and Torus are some of the commonly used network topologies in building multicomputer systems. Their performance highly depends on the underlying network communication such as multicast. Multicast is a communication method in which a message is sent from a source node to a certain number of destinations. Two major parameters used to evaluate multicast are time that a multicast process takes to deliver the message to all destinations and traffic that indicates the number of links used for this process. Research indicates that in general, it is NP- complete to find an optimal multicasting algorithm which is efficient on both time and traffic. This thesis suggests two new algorithms to achieve multicast in mesh and torus networks. Extensive simulations of these algorithms show that in practice they perform better than existing ones

Quarc: a novel network-on-chip architecture

This paper introduces the Quarc NoC, a novel NoC architecture inspired by the Spidergon NoC. The Quarc scheme significantly outperforms the Spidergon NoC through balancing the traffic which is the result of the modifications applied to the topology and the routing elements.The proposed architecture is highly efficient in performing collective communication operations including broadcast and multicast. We present the topology, routing discipline and switch architecture for the Quarc NoC and demonstrate the performance with the results obtained from discrete event simulations

A communication model of broadcast in wormhole-routed networks on-chip

This paper presents a novel analytical model to compute communication latency of broadcast as the most fundamental collective communication operation. The novelty of the model lies in its ability to predict the broadcast communication latency in wormhole-routed architectures employing asynchronous multi-port routers scheme. The model is applied to the Quarc NoC and its validity is verified by comparing the model predictions against the results obtained from a discrete-event simulator developed using OMNET++

Quarc: a high-efficiency network on-chip architecture

The novel Quarc NoC architecture, inspired by the Spidergon scheme is introduced as a NoC architecture that is highly efficient in performing collective communication operations including broadcast and multicast. The efficiency of the Quarc architecture is achieved through balancing the traffic which is the result of the modifications applied to the topology and the routing elements of the Spidergon NoC. This paper provides an ASIC implementation of both architectures using UMCpsilas 0.13 mum CMOS technology and demonstrates an analysis and comparison of the cost and performance between the Quarc and the Spidergon NoCs

A performance model of multicast communication in wormhole-routed networks on-chip

Collective communication operations form a part of overall traffic in most applications running on platforms employing direct interconnection networks. This paper presents a novel analytical model to compute communication latency of multicast as a widely used collective communication operation. The novelty of the model lies in its ability to predict the latency of the multicast communication in wormhole-routed architectures employing asynchronous multi-port routers scheme. The model is applied to the Quarc NoC and its validity is verified by comparing the model predictions against the results obtained from a discrete-event simulator developed using OMNET++

Performance Evaluation of Specialized Hardware for Fast Global Operations on Distributed Memory Multicomputers

Workstation cluster multicomputers are increasingly being applied for solving scientific problems that require massive computing power. Parallel Virtual Machine (PVM) is a popular message-passing model used to program these clusters. One of the major performance limiting factors for cluster multicomputers is their inefficiency in performing parallel program operations involving collective communications. These operations include synchronization, global reduction, broadcast/multicast operations and orderly access to shared global variables. Hall has demonstrated that a .secondary network with wide tree topology and centralized coordination processors (COP) could improve the performance of global operations on a variety of distributed architectures [Hall94a]. My hypothesis was that the efficiency of many PVM applications on workstation clusters could be significantly improved by utilizing a COP system for collective communication operations. To test my hypothesis, I interfaced COP system with PVM. The interface software includes a virtual memory-mapped secondary network interface driver, and a function library which allows to use COP system in place of PVM function calls in application programs. My implementation makes it possible to easily port any existing PVM applications to perform fast global operations using the COP system. To evaluate the performance improvements of using a COP system, I measured cost of various PVM global functions, derived the cost of equivalent COP library global functions, and compared the results. To analyze the cost of global operations on overall execution time of applications, I instrumented a complex molecular dynamics PVM application and performed measurements. The measurements were performed for a sample cluster size of 5 and for message sizes up to 16 kilobytes. The comparison of PVM and COP system global operation performance clearly demonstrates that the COP system can speed up a variety of global operations involving small-to-medium sized messages by factors of 5-25. Analysis of the example application for a sample cluster size of 5 show that speedup provided by my global function libraries and the COP system reduces overall execution time for this and similar applications by above 1.5 times. Additionally, the performance improvement seen by applications increases as the cluster size increases, thus providing a scalable solution for performing global operations