Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

Robotic Wireless Sensor Networks

In this chapter, we present a literature survey of an emerging, cutting-edge, and multi-disciplinary field of research at the intersection of Robotics and Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system that aims to achieve certain sensing goals while meeting and maintaining certain communication performance requirements, through cooperative control, learning and adaptation. While both of the component areas, i.e., Robotics and WSN, are very well-known and well-explored, there exist a whole set of new opportunities and research directions at the intersection of these two fields which are relatively or even completely unexplored. One such example would be the use of a set of robotic routers to set up a temporary communication path between a sender and a receiver that uses the controlled mobility to the advantage of packet routing. We find that there exist only a limited number of articles to be directly categorized as RWSN related works whereas there exist a range of articles in the robotics and the WSN literature that are also relevant to this new field of research. To connect the dots, we first identify the core problems and research trends related to RWSN such as connectivity, localization, routing, and robust flow of information. Next, we classify the existing research on RWSN as well as the relevant state-of-the-arts from robotics and WSN community according to the problems and trends identified in the first step. Lastly, we analyze what is missing in the existing literature, and identify topics that require more research attention in the future

Radio shadowing in vehicle-to-vehicle communication at urban intersections : a measurement and simulation-based evaluation

[no abstract

A Novel IoT Based Positioning and Shadowing System for Dementia Training.

A rapid increase in the number of patients with dementia, particularly memory decline or impairment, has led to the loss of self-care ability in more individuals and increases in medical and social costs. Numerous studies, and clinical service experience, have revealed that the intervention of nonpharmacological management for people with dementia is effective in delaying the degeneration caused by dementia. Due to recent rapid developments in information and communications technology, many innovative research and development and cross-domain applications have been effectively used in the dementia care environment. This study proposed a new short-term memory support and cognitive training application technology, a "positioning and shadowing system," to delay short-term memory degeneration in dementia. Training courses that integrate physical and digital technologies for the indoor location of patients with dementia were constructed using technologies such as Bluetooth Low Energy, fingerprint location algorithm, and short-range wireless communication. The Internet of Things was effectively applied to a clinical training environment for short-term memory. A pilot test verified that the results demonstrated learning effects in cognitive training and that the system can assist medical personnel in training and nursing work. Participants responded with favorable feedback regarding course satisfaction and system usability. This study can be used as a reference for future digital smart cognitive training that allows observation of the performance of patients with dementia in activities of daily living

Doctor of Philosophy

dissertationIn wireless sensor networks, knowing the location of the wireless sensors is critical in many remote sensing and location-based applications, from asset tracking, and structural monitoring to geographical routing. For a majority of these applications, received signal strength (RSS)-based localization algorithms are a cost effective and viable solution. However, RSS measurements vary unpredictably because of fading, the shadowing caused by presence of walls and obstacles in the path, and non-isotropic antenna gain patterns, which affect the performance of the RSS-based localization algorithms. This dissertation aims to provide efficient models for the measured RSS and use the lessons learned from these models to develop and evaluate efficient localization algorithms. The first contribution of this dissertation is to model the correlation in shadowing across link pairs. We propose a non-site specific statistical joint path loss model between a set of static nodes. Radio links that are geographically proximate often experience similar environmental shadowing effects and thus have correlated shadowing. Using a large number of multi-hop network measurements in an ensemble of indoor and outdoor environments, we show statistically significant correlations among shadowing experienced on different links in the network. Finally, we analyze multihop paths in three and four node networks using both correlated and independent shadowing models and show that independent shadowing models can underestimate the probability of route failure by a factor of two or greater. Second, we study a special class of algorithms, called kernel-based localization algorithms, that use kernel methods as a tool for learning correlation between the RSS measurements. Kernel methods simplify RSS-based localization algorithms by providing a means to learn the complicated relationship between RSS measurements and position. We present a common mathematical framework for kernel-based localization algorithms to study and compare the performance of four different kernel-based localization algorithms from the literature. We show via simulations and an extensive measurement data set that kernel-based localization algorithms can perform better than model-based algorithms. Results show that kernel methods can achieve an RMSE up to 55% lower than a model-based algorithm. Finally, we propose a novel distance estimator for estimating the distance between two nodes a and b using indirect link measurements, which are the measurements made between a and k, for k ? b and b and k, for k ? a. Traditionally, distance estimators use only direct link measurement, which is the pairwise measurement between the nodes a and b. The results show that the estimator that uses indirect link measurements enables better distance estimation than the estimator that uses direct link measurements

IRS-assisted UAV Communications: A Comprehensive Review

Intelligent reflecting surface (IRS) can smartly adjust the wavefronts in terms of phase, frequency, amplitude and polarization via passive reflections and without any need of radio frequency (RF) chains. It is envisaged as an emerging technology which can change wireless communication to improve both energy and spectrum efficiencies with low energy consumption and low cost. It can intelligently configure the wireless channels through a massive number of cost effective passive reflecting elements to improve the system performance. Similarly, unmanned aerial vehicle (UAV) communication has gained a viable attention due to flexible deployment, high mobility and ease of integration with several technologies. However, UAV communication is prone to security issues and obstructions in real-time applications. Recently, it is foreseen that UAV and IRS both can integrate together to attain unparalleled capabilities in difficult scenarios. Both technologies can ensure improved performance through proactively altering the wireless propagation using smart signal reflections and maneuver control in three dimensional (3D) space. IRS can be integrated in both aerial and terrene environments to reap the benefits of smart reflections. This study briefly discusses UAV communication, IRS and focuses on IRS-assisted UAC communications. It surveys the existing literature on this emerging research topic and highlights several promising technologies which can be implemented in IRS-assisted UAV communication. This study also presents several application scenarios and open research challenges. This study goes one step further to elaborate research opportunities to design and optimize wireless systems with low energy footprint and at low cost. Finally, we shed some light on future research aspects for IRS-assisted UAV communication

An adaptive weighting algorithm for accurate radio tomographic image in the environment with multipath and WiFi interference

Radio frequency device-free localization based on wireless sensor network has proved its feasibility in buildings. With this technique, a target can be located relying on the changes of received signal strengths caused by the moving object. However, the accuracy of many such systems deteriorates seriously in the environment with WiFi and the multipath interference. State-of-the-art methods do not efficiently solve the WiFi and multipath interference problems at the same time. In this article, we propose and evaluate an adaptive weighting radio tomography image algorithm to improve the accuracy of radio frequency device-free localization in the environment with multipath and different intensity of WiFi interference. Field experiments prove that our approach outperforms the state-of-the-art radio frequency device-free localization systems in the environment with multipath and WiFi interference

Characterisation of propagation in 60 GHz radio channels (invited)

Narrowband as well as wideband measurements have been performed in various indoor and outdoor environments in order to enable the development of reliable prediction models for 60 GHz radio channels. In addition, results of deterministic modelling on the basis of geometric ray-tracing have been compared with measurement results, showing that simple ray-tracing can be used to estimate both the narrowband and wideband characteristics of a 60 GHz radio channel. This paper reviews the measurement and modelling activities performed by various research institute

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Experimental Evidence for Heavy Tailed Interference in the IoT

International audience5G and beyond sees an ever increasing density of connected things. As not all devices are coordinated, there are limited opportunities to mitigate interference. As such, it is crucial to characterize the interference in order to understand its impact on coding, waveform and receiver design. While a number of theoretical models have been developed for the interference statistics in communications for the IoT, there is very little experimental validation. In this paper, we address this key gap in understanding by performing statistical analysis on recent measurements in the unlicensed 863 MHz to 870 MHz band in different regions of Aalborg, Denmark. In particular, we show that the measurement data suggests the distribution of the interference power is heavy tailed, confirming predictions from theoretical models