A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

Autors més prolífics Campus del Baix Llobregat (CBL) - 2011

S'inclouen el 30% de les publicacions científiques (articles i participacions a congressos) publicades l'any 2011 per autors de: CTTC, EETAC, ESAB, ICFO, i IdePreprin

Cross-layer modeling and optimization of next-generation internet networks

Scaling traditional telecommunication networks so that they are able to cope with the volume of future traffic demands and the stringent European Commission (EC) regulations on emissions would entail unaffordable investments. For this very reason, the design of an innovative ultra-high bandwidth power-efficient network architecture is nowadays a bold topic within the research community. So far, the independent evolution of network layers has resulted in isolated, and hence, far-from-optimal contributions, which have eventually led to the issues today's networks are facing such as inefficient energy strategy, limited network scalability and flexibility, reduced network manageability and increased overall network and customer services costs. Consequently, there is currently large consensus among network operators and the research community that cross-layer interaction and coordination is fundamental for the proper architectural design of next-generation Internet networks. This thesis actively contributes to the this goal by addressing the modeling, optimization and performance analysis of a set of potential technologies to be deployed in future cross-layer network architectures. By applying a transversal design approach (i.e., joint consideration of several network layers), we aim for achieving the maximization of the integration of the different network layers involved in each specific problem. To this end, Part I provides a comprehensive evaluation of optical transport networks (OTNs) based on layer 2 (L2) sub-wavelength switching (SWS) technologies, also taking into consideration the impact of physical layer impairments (PLIs) (L0 phenomena). Indeed, the recent and relevant advances in optical technologies have dramatically increased the impact that PLIs have on the optical signal quality, particularly in the context of SWS networks. Then, in Part II of the thesis, we present a set of case studies where it is shown that the application of operations research (OR) methodologies in the desing/planning stage of future cross-layer Internet network architectures leads to the successful joint optimization of key network performance indicators (KPIs) such as cost (i.e., CAPEX/OPEX), resources usage and energy consumption. OR can definitely play an important role by allowing network designers/architects to obtain good near-optimal solutions to real-sized problems within practical running times

Conserve and Protect Resources in Software-Defined Networking via the Traffic Engineering Approach

Software Defined Networking (SDN) is revolutionizing the architecture and operation of computer networks and promises a more agile and cost-efficient network management. SDN centralizes the network control logic and separates the control plane from the data plane, thus enabling flexible management of networks. A network based on SDN consists of a data plane and a control plane. To assist management of devices and data flows, a network also has an independent monitoring plane. These coexisting network planes have various types of resources, such as bandwidth utilized to transmit monitoring data, energy spent to power data forwarding devices and computational resources to control a network. Unwise management, even abusive utilization of these resources lead to the degradation of the network performance and increase the Operating Expenditure (Opex) of the network owner. Conserving and protecting limited network resources is thus among the key requirements for efficient networking. However, the heterogeneity of the network hardware and network traffic workloads expands the configuration space of SDN, making it a challenging task to operate a network efficiently. Furthermore, the existing approaches usually lack the capability to automatically adapt network configurations to handle network dynamics and diverse optimization requirements. Addtionally, a centralized SDN controller has to run in a protected environment against certain attacks. This thesis builds upon the centralized management capability of SDN, and uses cross-layer network optimizations to perform joint traffic engineering, e.g., routing, hardware and software configurations. The overall goal is to overcome the management complexities in conserving and protecting resources in multiple functional planes in SDN when facing network heterogeneities and system dynamics. This thesis presents four contributions: (1) resource-efficient network monitoring, (2) resource-efficient data forwarding, (3) using self-adaptive algorithms to improve network resource efficiency, and (4) mitigating abusive usage of resources for network controlling. The first contribution of this thesis is a resource-efficient network monitoring solution. In this thesis, we consider one specific type of virtual network management function: flow packet inspection. This type of the network monitoring application requires to duplicate packets of target flows and send them to packet monitors for in-depth analysis. To avoid the competition for resources between the original data and duplicated data, the network operators can transmit the data flows through physically (e.g., different communication mediums) or virtually (e.g., distinguished network slices) separated channels having different resource consumption properties. We propose the REMO solution, namely Resource Efficient distributed Monitoring, to reduce the overall network resource consumption incurred by both types of data, via jointly considering the locations of the packet monitors, the selection of devices forking the data packets, and flow path scheduling strategies. In the second contribution of this thesis, we investigate the resource efficiency problem in hybrid, server-centric data center networks equipped with both traditional wired connections (e.g., InfiniBand or Ethernet) and advanced high-data-rate wireless links (e.g., directional 60GHz wireless technology). The configuration space of hybrid SDN equipped with both wired and wireless communication technologies is massively large due to the complexity brought by the device heterogeneity. To tackle this problem, we present the ECAS framework to reduce the power consumption and maintain the network performance. The approaches based on the optimization models and heuristic algorithms are considered as the traditional way to reduce the operation and facility resource consumption in SDN. These approaches are either difficult to directly solve or specific for a particular problem space. As the third contribution of this thesis, we investigates the approach of using Deep Reinforcement Learning (DRL) to improve the adaptivity of the management modules for network resource and data flow scheduling. The goal of the DRL agent in the SDN network is to reduce the power consumption of SDN networks without severely degrading the network performance. The fourth contribution of this thesis is a protection mechanism based upon flow rate limiting to mitigate abusive usage of the SDN control plane resource. Due to the centralized architecture of SDN and its handling mechanism for new data flows, the network controller can be the failure point due to the crafted cyber-attacks, especially the Control-Plane- Saturation (CPS) attack. We proposes an In-Network Flow mAnagement Scheme (INFAS) to effectively reduce the generation of malicious control packets depending on the parameters configured for the proposed mitigation algorithm. In summary, the contributions of this thesis address various unique challenges to construct resource-efficient and secure SDN. This is achieved by designing and implementing novel and intelligent models and algorithms to configure networks and perform network traffic engineering, in the protected centralized network controller