Routing and Wavelength Assignment for Multicast Communication in Optical Network-on-Chip

An Optical Network-on-Chip (ONoC) is an emerging chip-level optical interconnection technology to realise high-performance and power-efficient inter-core communication for many-core processors. Within the field, multicast communication is one of the most important inter-core communication forms. It is not only widely used in parallel computing applications in Chip Multi-Processors (CMPs), but also common in emerging areas such as neuromorphic computing. While many studies have been conducted on designing ONoC architectures and routing schemes to support multicast communication, most existing solutions adopt the methods that were initially proposed for electrical interconnects. These solutions can neither fully take advantage of optical communication nor address the special requirements of an ONoC. Moreover, most of them focus only on the optimisation of one multicast, which limits the practical applications because real systems often have to handle multiple multicasts requested from various applications. Hence, this thesis will address the design of a high-performance communication scheme for multiple multicasts by taking into account the unique characteristics and constraints of an ONoC. This thesis studies the problem from a network-level perspective. The design methodology is to optimally route all multicasts requested simultaneously from the applications in an ONoC, with the objective of efficiently utilising available wavelengths. The novelty is to adopt multicast-splitting strategies, where a multicast can be split into several sub-multicasts according to the distribution of multicast nodes, in order to reduce the conflicts of different multicasts. As routing and wavelength assignment problem is an NP-hard problem, heuristic approaches that use the multicast-splitting strategy are proposed in this thesis. Specifically, three routing and wavelength assignment schemes for multiple multicasts in an ONoC are proposed for different problem domains. Firstly, PRWAMM, a Path-based Routing and Wavelength Assignment for Multiple Multicasts in an ONoC, is proposed. Due to the low manufacture complexity requirement of an ONoC, e.g., no splitters, path-based routing is studied in PRWAMM. Two wavelength-assignment strategies for multiple multicasts under path-based routing are proposed. One is an intramulticast wavelength assignment, which assigns wavelength(s) for one multicast. The other is an inter-multicast wavelength assignment, which assigns wavelength(s) for different multicasts, according to the distributions of multicasts. Simulation results show that PRWAMM can reduce the average number of wavelengths by 15% compared to other path-based schemes. Secondly, RWADMM, a Routing and Wavelength Assignment scheme for Distribution-based Multiple Multicasts in a 2D ONoC, is proposed. Because path-based routing lacks flexibility, it cannot reduce the link conflicts effectively. Hence, RWADMM is designed, based on the distribution of different multicasts, which includes two algorithms. One is an optimal routing and wavelength assignment algorithm for special distributions of multicast nodes. The other is a heuristic routing and wavelength assignment algorithm for random distributions of multicast nodes. Simulation results show that RWADMM can reduce the number of wavelengths by 21.85% on average, compared to the state-of-the-art solutions in a 2D ONoC. Thirdly, CRRWAMM, a Cluster-based Routing and Reusable Wavelength Assignment scheme for Multiple Multicasts in a 3D ONoC, is proposed. Because of the different architectures with a 2D ONoC (e.g., the layout of nodes, optical routers), the methods designed for a 2D ONoC cannot be simply extended to a 3D ONoC. In CRRWAMM, the distribution of multicast nodes in a mesh-based 3D ONoC is analysed first. Then, routing theorems for special instances are derived. Based on the theorems, a general routing scheme, which includes a cluster-based routing method and a reusable wavelength assignment method, is proposed. Simulation results show that CRRWAMM can reduce the number of wavelengths by 33.2% on average, compared to other schemes in a 3D ONoC. Overall, the three routing and wavelength assignment schemes can achieve high-performance multicast communication for multiple multicasts of their problem domains in an ONoC. They all have the advantages of a low routing complexity, a low wavelength requirement, and good scalability, compared to their counterparts, respectively. These methods make an ONoC a flexible high-performance computing platform to execute various parallel applications with different multicast requirements. As future work, I will investigate the power consumption of various routing schemes for multicasts. Using a multicast-splitting strategy may increase power consumption since it needs different wavelengths to send packets to different destinations for one multicast, though the reduction of wavelengths used in the schemes can also potentially decrease overall power consumption. Therefore, how to achieve the best trade-off between the total number of wavelengths used and the number of sub-multicasts in order to reduce power consumption will be interesting future research

On Multicast in Asynchronous Networks-on-Chip: Techniques, Architectures, and FPGA Implementation

In this era of exascale computing, conventional synchronous design techniques are facing unprecedented challenges. The consumer electronics market is replete with many-core systems in the range of 16 cores to thousands of cores on chip, integrating multi-billion transistors. However, with this ever increasing complexity, the traditional design approaches are facing key issues such as increasing chip power, process variability, aging, thermal problems, and scalability. An alternative paradigm that has gained significant interest in the last decade is asynchronous design. Asynchronous designs have several potential advantages: they are naturally energy proportional, burning power only when active, do not require complex clock distribution, are robust to different forms of variability, and provide ease of composability for heterogeneous platforms. Networks-on-chip (NoCs) is an interconnect paradigm that has been introduced to deal with the ever-increasing system complexity. NoCs provide a distributed, scalable, and efficient interconnect solution for today’s many-core systems. Moreover, NoCs are a natural match with asynchronous design techniques, as they separate communication infrastructure and timing from the computational elements. To this end, globally-asynchronous locally-synchronous (GALS) systems that interconnect multiple processing cores, operating at different clock speeds, using an asynchronous NoC, have gained significant interest. While asynchronous NoCs have several advantages, they also face a key challenge of supporting new types of traffic patterns. Once such pattern is multicast communication, where a source sends packets to arbitrary number of destinations. Multicast is not only common in parallel computing, such as for cache coherency, but also for emerging areas such as neuromorphic computing. This important capability has been largely missing from asynchronous NoCs. This thesis introduces several efficient multicast solutions for these interconnects. In particular, techniques, and network architectures are introduced to support high-performance and low-power multicast. Two leading network topologies are the focus: a variant mesh-of-trees (MoT) and a 2D mesh. In addition, for a more realistic implementation and analysis, as well as significantly advancing the field of asynchronous NoCs, this thesis also targets synthesis of these NoCs on commercial FPGAs. While there has been significant advances in FPGA technologies, there has been only limited research on implementing asynchronous NoCs on FPGAs. To this end, a systematic computeraided design (CAD) methodology has been introduced to efficiently and safely map asynchronous NoCs on FPGAs. Overall, this thesis makes the following three contributions. The first contribution is a multicast solution for a variant MoT network topology. This topology consists of simple low-radix switches, and has been used in high-performance computing platforms. A novel local speculation technique is introduced, where a subset of the network’s switches are speculative that always broadcast every packet. These switches are very simple and have high performance. Speculative switches are surrounded by non-speculative ones that route packets based on their destinations and also throttle any redundant copies created by the former. This hybrid network architecture achieved significant performance and power benefits over other multicast approaches. The second contribution is a multicast solution for a 2D-mesh topology, which is more complex with higher-radix switches and also is more commonly used. A novel continuous-time replication strategy is introduced to optimize the critical multi-way forking operation of a multicast transmission. In this technique, a multicast packet is first stored in an input port of a switch, from where it is sent through distinct output ports towards different destinations concurrently, at each output’s own rate and in continuous time. This strategy is shown to have significant latency and energy benefits over an approach that performs multicast using multiple distinct serial unicasts to each destination. Finally, a systematic CAD methodology is introduced to synthesize asynchronous NoCs on commercial FPGAs. A two-fold goal is targeted: correctness and high performance. For ease of implementation, only existing FPGA synthesis tools are used. Moreover, since asynchronous NoCs involve special asynchronous components, a comprehensive guide is introduced to map these elements correctly and efficiently. Two asynchronous NoC switches are synthesized using the proposed approach on a leading Xilinx FPGA in 28 nm: one that only handles unicast, and the other that also supports multicast. Both showed significant energy benefits with some performance gains over a state-of-the-art synchronous switch

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Scaling High-Performance Interconnect Architectures to Many-Core Systems.

The ever-increasing demand for performance scaling has made multi-core (2-8 cores) chips prevalent in today’s computing systems and foreshadows the shift toward many-core (10s- 100s of cores) chips in the near future. Although the potential performance gains from many-core systems remain appealing, the widespread adoption of these systems hinges on their ability to scale performance while simultaneously satisfying Quality-of-Service (QoS) and energy-efficiency constraints. This work makes the case that the interconnect for these many-core systems has a significant impact on the aforementioned scalability issues. The impact of interconnects on many-core systems is illustrated by observing that the degree of the interconnect has a signicant effect on system scalability and demonstrating that the architecture of high-radix, many-core systems are feasible, energy-efficient, and high-performance. The feasibility of high-radix crossbars for many-core systems is first shown through a new circuit-level building block called the Swizzle-Switch which can operate at frequencies up to 1.5GHz for 128-bit, radix-64 crossbars. This work then shows how a many-core system called the Swizzle-Switch Network (SSN) can use the Swizzle-Switch as the central building block for a flat crossbar interconnect. The SSN is shown to be advantageous to traditional Network-on-Chip (NoC) for systems up to 64 cores. The SSN performance by 21% relative to a Mesh while also providing a 25% energy savings over the Mesh. The Swizzle-Switch is also leveraged as a building block for high-radix NoC topologies that can support many-core architectures. The Swizzle-Switch-based Flattened Butterfly topology is demonstrated to provide a 15% speedup and 10% energy savings over the Mesh. Finally, the impact that 3D stacking technology has on many-core scalability is evaluated for bus and crossbar interconnects. A 3D-optimized Swizzle-Switch Network is able to leverage frequency gains to achieve a 15-28% speedup over a 2D-Swizzle-Switch Network when using memory- intensive benchmarks. Additionally, a bus-based 64-core architecture is shown to provide an average speedup of 49× over a baseline uniprocessor system when using 3D technology.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/93980/1/ksewell_1.pd

Interconnects architectures for many-core era using surface-wave communication

PhD ThesisNetworks-on-chip (NoCs) is a communication paradigm that has emerged aiming to address on-chip communication challenges and to satisfy interconnection demands for chip-multiprocessors (CMPs). Nonetheless, there is continuous demand for even higher computational power, which is leading to a relentless downscaling of CMOS technology to enable the integration of many-cores. However, technology downscaling is in favour of the gate nodes over wires in terms of latency and power consumption. Consequently, this has led to the era of many-core processors where power consumption and performance are governed by inter-core communications rather than core computation. Therefore, NoCs need to evolve from being merely metalbased implementations which threaten to be a performance and power bottleneck for many-core efficiency and scalability. To overcome such intensified inter-core communication challenges, this thesis proposes a novel interconnect technology: the surface-wave interconnect (SWI). This new RF-based on-chip interconnect has notable characteristics compared to cutting-edge on-chip interconnects in terms of CMOS compatibility, high speed signal propagation, low power dissipation, and massive signal fan-out. Nonetheless, the realization of the SWI requires investigations at different levels of abstraction, such as the device integration and RF engineering levels. The aim of this thesis is to address the networking and system level challenges and highlight the potential of this interconnect. This should encourage further research at other levels of abstraction. Two specific system-level challenges crucial in future many-core systems are tackled in this study, which are cross-the-chip global communication and one-to-many communication. This thesis makes four major contributions towards this aim. The first is reducing the NoC average-hop count, which would otherwise increase packet-latency exponentially, by proposing a novel hybrid interconnect architecture. This hybrid architecture can not only utilize both regular metal-wire and SWI, but also exploits merits of both bus and NoC architectures in terms of connectivity compared to other general-purpose on-chip interconnect architectures. The second contribution addresses global communication issues by developing a distance-based weighted-round-robin arbitration (DWA) algorithm. This technique prioritizes global communication to be send via SWI short-cuts, which offer more efficient power dissipation and faster across-the-chip signal propagation. Results obtained using a cycleaccurate simulator demonstrate the effectiveness of the proposed system architecture in terms of significant power reduction, considervii able average delay reduction and higher throughput compared to a regular NoC. The third contribution is in handling multicast communications, which are normally associated with traffic overload, hotspots and deadlocks and therefore increase, by an order of magnitude the power consumption and latency. This has been achieved by proposing a novel routing and centralized arbitration schemes that exploits the SWI0s remarkable fan-out features. The evaluation demonstrates drastic improvements in the effectiveness of the proposed architecture in terms of power consumption ( 2-10x) and performance ( 22x) but with negligible hardware overheads ( 2%). The fourth contribution is to further explore multicast contention handling in a flexible decentralized manner, where original techniques such as stretch-multicast and ID-tagging flow control have been developed. A comparison of these techniques shows that the decentralized approach is superior to the centralized approach with low traffic loads, while the latter outperforms the former near and after NoC saturation

NoC-based Architectures for Real-Time Applications : Performance Analysis and Design Space Exploration

Monoprocessor architectures have reached their limits in regard to the computing power they offer vs the needs of modern systems. Although multicore architectures partially mitigate this limitation and are commonly used nowadays, they usually rely on intrinsically non-scalable buses to interconnect the cores. The manycore paradigm was proposed to tackle the scalability issue of bus-based multicore processors. It can scale up to hundreds of processing elements (PEs) on a single chip, by organizing them into computing tiles (holding one or several PEs). Intercore communication is usually done using a Network-on-Chip (NoC) that consists of interconnected onchip routers allowing communication between tiles. However, manycore architectures raise numerous challenges, particularly for real-time applications. First, NoC-based communication tends to generate complex blocking patterns when congestion occurs, which complicates the analysis, since computing accurate worst-case delays becomes difficult. Second, running many applications on large Systems-on-Chip such as manycore architectures makes system design particularly crucial and complex. On one hand, it complicates Design Space Exploration, as it multiplies the implementation alternatives that will guarantee the desired functionalities. On the other hand, once a hardware architecture is chosen, mapping the tasks of all applications on the platform is a hard problem, and finding an optimal solution in a reasonable amount of time is not always possible. Therefore, our first contributions address the need for computing tight worst-case delay bounds in wormhole NoCs. We first propose a buffer-aware worst-case timing analysis (BATA) to derive upper bounds on the worst-case end-to-end delays of constant-bit rate data flows transmitted over a NoC on a manycore architecture. We then extend BATA to cover a wider range of traffic types, including bursty traffic flows, and heterogeneous architectures. The introduced method is called G-BATA for Graph-based BATA. In addition to covering a wider range of assumptions, G-BATA improves the computation time; thus increases the scalability of the method. In a second part, we develop a method addressing design and mapping for applications with real-time constraints on manycore platforms. It combines model-based engineering tools (TTool) and simulation with our analytical verification technique (G-BATA) and tools (WoPANets) to provide an efficient design space exploration framework. Finally, we validate our contributions on (a) a serie of experiments on a physical platform and (b) two case studies taken from the real world: an autonomous vehicle control application, and a 5G signal decoder applicatio

Energy-Efficient Interconnection Networks for High-Performance Computing

In recent years, energy has become one of the most important factors for de- signing and operating large scale computing systems. This is particularly true in high-performance computing, where systems often consist of thousands of nodes. Especially after the end of Dennard’s scaling, the demand for energy- proportionality in components, where energy is depending linearly on utilization, increases continuously. As the main contributor to the overall power consumption, processors have received the main attention so far. The increasing energy proportionality of processors, however, shifts the focus to other components such as interconnection networks. Their share of the overall power consumption is expected to increase to 20% or more while other components further increase their efficiency in the near future. Hence, it is crucial to improve energy proportionality in interconnection networks likewise to reduce overall power and energy consumption. To facilitate these attempts, this work provides comprehensive studies about energy saving in interconnection networks at different levels. First, interconnection networks differ fundamentally from other components in their underlying technology. To gain a deeper understanding of these differences and to identify targets for energy savings, this work provides a detailed power analysis of current network hardware. Furthermore, various applications at different scales are analyzed regarding their communication patterns and locality properties. The findings show that communication makes up only a small fraction of the execution time and networks are actually idling most of the time. Another observation is that point-to-point communication often only occurs within various small subsets of all participants, which indicates that a coordinated mapping could further decrease network traffic. Based on these studies, three different energy-saving policies are designed, which all differ in their implementation and focus. Then, these policies are evaluated in an event-based, power-aware network simulator. While two policies that operate completely local at link level, enable significant energy savings of more than 90% in most analyses, the hybrid one does not provide further benefits despite significant additional design effort. Additionally, these studies include network design parameters, such as transition time between different link configurations, as well as the three most common topologies in supercomputing systems. The final part of this work addresses the interactions of congestion management and energy-saving policies. Although both network management strategies aim for different goals and use opposite approaches, they complement each other and can increase energy efficiency in all studies as well as improve the performance overhead as opposed to plain energy saving