Reliable and Energy Efficient MLC STT-RAM Buffer for CNN Accelerators

We propose a lightweight scheme where the formation of a data block is changed in such a way that it can tolerate soft errors significantly better than the baseline. The key insight behind our work is that CNN weights are normalized between -1 and 1 after each convolutional layer, and this leaves one bit unused in half-precision floating-point representation. By taking advantage of the unused bit, we create a backup for the most significant bit to protect it against the soft errors. Also, considering the fact that in MLC STT-RAMs the cost of memory operations (read and write), and reliability of a cell are content-dependent (some patterns take larger current and longer time, while they are more susceptible to soft error), we rearrange the data block to minimize the number of costly bit patterns. Combining these two techniques provides the same level of accuracy compared to an error-free baseline while improving the read and write energy by 9% and 6%, respectively

ParaDox: Eliminating Voltage Margins via Heterogeneous Fault Tolerance.

Providing reliability is becoming a challenge for chip manufacturers, faced with simultaneously trying to improve miniaturization, performance and energy efficiency. This leads to very large margins on voltage and frequency, designed to avoid errors even in the worst case, along with significant hardware expenditure on eliminating voltage spikes and other forms of transient error, causing considerable inefficiency in power consumption and performance. We flip traditional ideas about reliability and performance around, by exploring the use of error resilience for power and performance gains. ParaMedic is a recent architecture that provides a solution for reliability with low overheads via automatic hardware error recovery. It works by splitting up checking onto many small cores in a heterogeneous multicore system with hardware logging support. However, its design is based on the idea that errors are exceptional. We transform ParaMedic into ParaDox, which shows high performance in both error-intensive and scarce-error scenarios, thus allowing correct execution even when undervolted and overclocked. Evaluation within error-intensive simulation environments confirms the error resilience of ParaDox and the low associated recovery cost. We estimate that compared to a non-resilient system with margins, ParaDox can reduce energy-delay product by 15% through undervolting, while completely recovering from any induced errors

Power efficient approaches to redundant multithreading

Journal ArticleNoise and radiation-induced soft errors (transient faults) in computer systems have increased significantly over the last few years and are expected to increase even more as we move toward smaller transistor sizes and lower supply voltages. Fault detection and recovery can be achieved through redundancy. The emergence of chip multiprocessors (CMPs) makes it possible to execute redundant threads on a chip and provide relatively low-cost reliability. State-of-the-art implementations execute two copies of the same program as two threads (redundant multithreading), either on the same or on separate processor cores in a CMP, and periodically check results. Although this solution has favorable performance and reliability properties, every redundant instruction flows through a high-frequency complex out-of-order pipeline, thereby incurring a high power consumption penalty. This paper proposes mechanisms that attempt to provide reliability at a modest power and complexity cost. When executing a redundant thread, the trailing thread benefits from the information produced by the leading thread. We take advantage of this property and comprehensively study different strategies to reduce the power overhead of the trailing core in a CMP. These strategies include dynamic frequency scaling, in-order execution, and parallelization of the trailing thread

PYDAC: A DISTRIBUTED RUNTIME SYSTEM AND PROGRAMMING MODEL FOR A HETEROGENEOUS MANY-CORE ARCHITECTURE

Heterogeneous many-core architectures that consist of big, fast cores and small, energy-efficient cores are very promising for future high-performance computing (HPC) systems. These architectures offer a good balance between single-threaded perfor- mance and multithreaded throughput. Such systems impose challenges on the design of programming model and runtime system. Specifically, these challenges include (a) how to fully utilize the chip’s performance, (b) how to manage heterogeneous, un- reliable hardware resources, and (c) how to generate and manage a large amount of parallel tasks. This dissertation proposes and evaluates a Python-based programming framework called PyDac. PyDac supports a two-level programming model. At the high level, a programmer creates a very large number of tasks, using the divide-and-conquer strategy. At the low level, tasks are written in imperative programming style. The runtime system seamlessly manages the parallel tasks, system resilience, and inter- task communication with architecture support. PyDac has been implemented on both an field-programmable gate array (FPGA) emulation of an unconventional het- erogeneous architecture and a conventional multicore microprocessor. To evaluate the performance, resilience, and programmability of the proposed system, several micro-benchmarks were developed. We found that (a) the PyDac abstracts away task communication and achieves programmability, (b) the micro-benchmarks are scalable on the hardware prototype, but (predictably) serial operation limits some micro-benchmarks, and (c) the degree of protection versus speed could be varied in redundant threading that is transparent to programmers

ParaMedic: Heterogeneous Parallel Error Correction

Processor error detection can be reduced in cost significantly by exploiting the parallelism that exists in a repeated copy of an execution, which may not exist in the original code, to split up the redundant work on a large number of small, highly efficient cores. However, such schemes don't provide a method for automatic error recovery. We develop ParaMedic, an architecture to allow efficient automatic correction of errors detected in a system by using parallel heterogeneous cores, to provide a full fail-safe system that does not propagate errors to other systems, and can recover without manual intervention. This uses logging to roll back any computation that occurred after a detected error, along with a set of techniques to provide error-checking parallelism while still preventing the escape of incorrect processor values in multicore environments, where ordering of individual processors' logs is not enough to be able to roll back execution. Across a set of single and multi-threaded benchmarks, we achieve 3.1\% and 1.5\% overhead respectively, compared with 1.9\% and 1\% for error detection alone.Arm Lt

Harnessing Checker Hierarchy for Reliable Microprocessors

Traditional fault-tolerant multi-threading architectures provide good fault tolerance by re-executing all the computations. However, such a full re-execution significantly increases the demand on the processor resources, resulting in severe performance degradation. To address this problem, this dissertation presents Active Verification Management (AVM) approaches that utilize a checker hierarchy to increase its performance with a minimal effect on the overall reliability. Based on a simplified queueing model, AVM employs a filter checker which prioritizes the verification candidates to selectively do verification. This dissertation proposes three filter checkers - based on (1) result usage, (2) result bitwidth, and (3) result anomaly - that exploit correctness-criticality metrics and anomaly speculation. Binary Correctness Criticality (BCC) and Likelihood of Correctness Criticality (LoCC) are metrics that quantify whether an instruction is important for reliability or how likely an instruction is correctness-critical, respectively. Based on the BCC, a result-usage-based filter checker mitigates the verification workload by bypassing instructions that are unnecessary for correct execution. Computing the LoCC is accomplished by exploiting information redundancy of compressing computationally useful data bits. Numerical significance hints let the result-bitwidth-based filter checker guide a verification priority effectively before the re-execution process starts. A result-anomaly-based filter checker exploits a value similarity property, which is defined by a frequent occurrence of partially identical values. Based on the biased distribution of similarity distance measure, this dissertation further investigates another application to exploit similar values for soft error tolerance with anomaly speculation. Extensive measurements show that the majority of instructions produce values that are different from the previous result value only in a few bits. Experimental results show that the proposed schemes accelerate the processor to be 180% faster than traditional fully-fault-tolerant processor, with a minimal impact on the overall soft error rate. With no AVM, congestion at the checker badly affects performance, to the tune of 57%, when compared to that of a non-fault-tolerant processor. These results explain that the proposed AVM has the potential to solve the verification congestion problem when perfect fault coverage is not needed

Multi-core devices for safety-critical systems: a survey

Multi-core devices are envisioned to support the development of next-generation safety-critical systems, enabling the on-chip integration of functions of different criticality. This integration provides multiple system-level potential benefits such as cost, size, power, and weight reduction. However, safety certification becomes a challenge and several fundamental safety technical requirements must be addressed, such as temporal and spatial independence, reliability, and diagnostic coverage. This survey provides a categorization and overview at different device abstraction levels (nanoscale, component, and device) of selected key research contributions that support the compliance with these fundamental safety requirements.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2015-65316-P, Basque Government under grant KK-2019-00035 and the HiPEAC Network of Excellence. The Spanish Ministry of Economy and Competitiveness has also partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717).Peer ReviewedPostprint (author's final draft

Exploiting Natural On-chip Redundancy for Energy Efficient Memory and Computing

Power density is currently the primary design constraint across most computing segments and the main performance limiting factor. For years, industry has kept power density constant, while increasing frequency, lowering transistors supply (Vdd) and threshold (Vth) voltages. However, Vth scaling has stopped because leakage current is exponentially related to it. Transistor count and integration density keep doubling every process generation (Moore’s Law), but the power budget caps the amount of hardware that can be active at the same time, leading to dark silicon. With each new generation, there are more resources available, but we cannot fully exploit their performance potential. In the last years, different research trends have explored how to cope with dark silicon and unlock the energy efficiency of the chips, including Near-Threshold voltage Computing (NTC) and approximate computing. NTC aggressively lowers Vdd to values near Vth. This allows a substantial reduction in power, as dynamic power scales quadratically with supply voltage. The resultant power reduction could be used to activate more chip resources and potentially achieve performance improvements. Unfortunately, Vdd scaling is limited by the tight functionality margins of on-chip SRAM transistors. When scaling Vdd down to values near-threshold, manufacture-induced parameter variations affect the functionality of SRAM cells, which eventually become not reliable. A large amount of emerging applications, on the other hand, features an intrinsic error-resilience property, tolerating a certain amount of noise. In this context, approximate computing takes advantage of this observation and exploits the gap between the level of accuracy required by the application and the level of accuracy given by the computation, providing that reducing the accuracy translates into an energy gain. However, deciding which instructions and data and which techniques are best suited for approximation still poses a major challenge. This dissertation contributes in these two directions. First, it proposes a new approach to mitigate the impact of SRAM failures due to parameter variation for effective operation at ultra-low voltages. We identify two levels of natural on-chip redundancy: cache level and content level. The first arises because of the replication of blocks in multi-level cache hierarchies. We exploit this redundancy with a cache management policy that allocates blocks to entries taking into account the nature of the cache entry and the use pattern of the block. This policy obtains performance improvements between 2% and 34%, with respect to block disabling, a technique with similar complexity, incurring no additional storage overhead. The latter (content level redundancy) arises because of the redundancy of data in real world applications. We exploit this redundancy compressing cache blocks to fit them in partially functional cache entries. At the cost of a slight overhead increase, we can obtain performance within 2% of that obtained when the cache is built with fault-free cells, even if more than 90% of the cache entries have at least a faulty cell. Then, we analyze how the intrinsic noise tolerance of emerging applications can be exploited to design an approximate Instruction Set Architecture (ISA). Exploiting the ISA redundancy, we explore a set of techniques to approximate the execution of instructions across a set of emerging applications, pointing out the potential of reducing the complexity of the ISA, and the trade-offs of the approach. In a proof-of-concept implementation, the ISA is shrunk in two dimensions: Breadth (i.e., simplifying instructions) and Depth (i.e., dropping instructions). This proof-of-concept shows that energy can be reduced on average 20.6% at around 14.9% accuracy loss