646 research outputs found

    Nonlinear control of two-stage single-phase standalone photovoltaic system

    Get PDF
    This paper presents a single-phase Photovoltaic (PV) inverter with its superior and robust control in a standalone mode. Initially, modeling and layout of the Buck-Boost DC-DC converter by adopting a non-linear Robust Integral Back-stepping controller (RIBSC) is provided. The controller makes use of a reference voltage generated through the regression plane so that the operating point corresponding to the maximum power point (MPP) could be achieved through the converter under changing climatic conditions. The other main purpose of the Buck-Boost converter is to act like a transformer and produce an increased voltage at the inverter input whenever desired. By not using a transformer makes the circuit size more compact and cost-effective. The proposed RIBSC is applied to an H-bridge inverter with an LC filter to produce the sinusoidal wave in the presence of variations in the output to minimize the difference between the output voltage and the reference voltage. Lyapunov stability criterion has been used to verify the stability and finite-time convergence of the overall system. The overall system is simulated in MATLAB/Simulink to test the system performance with different loads, varying climatic conditions and inverter reference voltages. The proposed methodology is compared with a back-stepping controller and Proportional Integral Derivative (PID) controller under rapidly varying climatic conditions. Results demonstrated that the proposed technique yielded a tracking time of 0.01s, a total harmonic distortion of 9.71% and a root means square error of 0.3998 in the case of resistive load thus showing superior control performance compared to the state-of-the-art control techniques

    Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review

    Get PDF
    The electronic nose, popularly known as the E-nose, that combines gas sensor arrays (GSAs) with machine learning has gained a strong foothold in gas sensing technology. The E-nose designed to mimic the human olfactory system, is used for the detection and identification of various volatile compounds. The GSAs develop a unique signal fingerprint for each volatile compound to enable pattern recognition using machine learning algorithms. The inexpensive, portable and non-invasive characteristics of the E-nose system have rendered it indispensable within the gas-sensing arena. As a result, E-noses have been widely employed in several applications in the areas of the food industry, health management, disease diagnosis, water and air quality control, and toxic gas leakage detection. This paper reviews the various sensor fabrication technologies of GSAs and highlights the main operational framework of the E-nose system. The paper details vital signal pre-processing techniques of feature extraction, feature selection, in addition to machine learning algorithms such as SVM, kNN, ANN, and Random Forests for determining the type of gas and estimating its concentration in a competitive environment. The paper further explores the potential applications of E-noses for diagnosing diseases, monitoring air quality, assessing the quality of food samples and estimating concentrations of volatile organic compounds (VOCs) in air and in food samples. The review concludes with some challenges faced by E-nose, alternative ways to tackle them and proposes some recommendations as potential future work for further development and design enhancement of E-noses

    Automatic Control of General Anesthesia: New Developments and Clinical Experiments

    Get PDF
    L’anestesia generale è uno stato di coma farmacologicamente indotto, temporaneo e reversibile. Il suo obiettivo consiste nel provocare la perdita totale della coscienza e nel sopprimere la percezione del dolore. Essa costituisce un aspetto fondamentale per la medicina moderna in quanto consente di praticare interventi chirurgici invasivi senza causare ansia e dolore al paziente. Nella pratica clinica dell’anestesia totalmente endovenosa questi effetti vengono generalmente ottenuti mediante la somministrazione simultanea del farmaco ipnotico propofol e del farmaco analgesico remifentanil. Il dosaggio di questi farmaci viene gestito dal medico anestesista basandosi su linee guida farmacologiche e monitorando la risposta clinica del paziente. Recenti sviluppi nelle tecniche di elaborazione dei segnali fisiologici hanno consentito di ottenere degli indicatori quantitativi dello stato anestetico del paziente. Tali indicatori possono essere utilizzati come segnali di retroazione per sistemi di controllo automatico dell'anestesia. Lo sviluppo di questi sistemi ha come obiettivo quello di fornire uno strumento di supporto per l'anestesista. Il lavoro presentato in questa tesi è stato svolto nell'ambito del progetto di ricerca riguardante il controllo automatico dell'anestesia attivo presso l'Università degli Studi di Brescia. Esso è denominato ACTIVA (Automatic Control of Total IntraVenous Anesthesia) ed è il risultato della collaborazione tra il Gruppo di Ricerca sui Sistemi di Controllo dell’Università degli Studi di Brescia e l’Unità Operativa Anestesia e Rianimazione 2 degli Spedali Civili di Brescia. L’obiettivo del progetto ACTIVA consiste nello sviluppo teorico, nell’implementazione e nella validazione clinica di strategie di controllo innovative per il controllo automatico dell’anestesia totalmente endovenosa. Nel dettaglio, in questa tesi vengono inizialmente presentati i risultati sperimentali ottenuti con strutture di controllo basate sull'algoritmo PID e PID ad eventi per la somministrazione di propofol e remifentanil. Viene poi presentato lo sviluppo teorico e la validazione clinica di strutture di controllo predittivo basate su modello. Successivamente vengono presentati i risultati di uno studio in simulazione riguardante una soluzione di controllo innovativa che consente all'anestesista di regolare esplicitamente il bilanciamento tra propofol e remifentanil. Infine, vengono presentati gli sviluppi teorici ed i relativi studi in simulazione riguardanti soluzioni di controllo personalizzate per le fasi di induzione e mantenimento dell'anestesia.General anesthesia is a state of pharmacologically induced, temporary and reversible coma. Its goal is to cause total loss of consciousness and suppress the perception of pain. It constitutes a fundamental aspect of modern medicine as it allows invasive surgical procedures to be performed without causing anxiety and pain to the patient. In the clinical practice of total intravenous anesthesia, these effects are generally obtained by the simultaneous administration of the hypnotic drug propofol and of the analgesic drug remifentanil. The dosing of these drugs is managed by the anesthesiologist on the basis of pharmacological guidelines and by monitoring the patient's clinical response. Recent developments in physiological signal processing techniques have introduced the possibility to obtain quantitative indicators of the patient's anesthetic state. These indicators can be used as feedback signals for automatic anesthesia control systems. The development of these systems aims to provide a support tool for the anesthesiologist. The work presented in this thesis has been carried out in the framework of the research project concerning the automatic control anesthesia at the University of Brescia. The project is called ACTIVA (Automatic Control of Total IntraVenous Anesthesia) and is the result of the collaboration between the Research Group on Control Systems of the University of Brescia and the Anesthesia and Intensive Care Unit 2 of the Spedali Civili di Brescia. The objective of the ACTIVA project consists in the theoretical development, implementation, and clinical validation of innovative control strategies for the automatic control of total intravenous anesthesia. In detail, in this thesis the experimental results obtained with control structures based on the PID and on event-based PID controllers for the administration of propofol and remifentanil are initially presented. The theoretical development and clinical validation of model predictive control strategies is then proposed. Next, the results of a simulation study regarding an innovative control solution that allows the anesthesiologist to explicitly adjust the balance between propofol and remifentanil are given. Finally, the theoretical developments and the relative simulation studies concerning personalized control solutions for induction and maintenance phases of anesthesia are explained

    Analog Photonics Computing for Information Processing, Inference and Optimisation

    Full text link
    This review presents an overview of the current state-of-the-art in photonics computing, which leverages photons, photons coupled with matter, and optics-related technologies for effective and efficient computational purposes. It covers the history and development of photonics computing and modern analogue computing platforms and architectures, focusing on optimization tasks and neural network implementations. The authors examine special-purpose optimizers, mathematical descriptions of photonics optimizers, and their various interconnections. Disparate applications are discussed, including direct encoding, logistics, finance, phase retrieval, machine learning, neural networks, probabilistic graphical models, and image processing, among many others. The main directions of technological advancement and associated challenges in photonics computing are explored, along with an assessment of its efficiency. Finally, the paper discusses prospects and the field of optical quantum computing, providing insights into the potential applications of this technology.Comment: Invited submission by Journal of Advanced Quantum Technologies; accepted version 5/06/202

    Synthesis of Hybrid Fuzzy Logic Law for Stable Control of Magnetic Levitation System

    Get PDF
    In this paper, we present a method to design a hybrid fuzzy logic controller (FLC) for a magnetic levitation system (MLS) based on the linear feedforward control method combined with FLC. MLS has many applications in industry, transportation, but the system is strongly nonlinear and unstable at equilibrium. The fast response linear control law ensures that the ball is kept at the desired point, but does not remain stable at that point in the presence of noise or deviation from the desired position. The controller that combines linear feedforward control and FLC is designed to ensure ball stability and increase the system's fast-response when deviating from equilibrium and improve control quality. Simulation results in the presence of noise show that the proposed control law has a fast and stable effect on external noise. The advantages of the proposed controller are shown through the comparison results with conventional PID and FLC control laws

    Computational approaches to Explainable Artificial Intelligence: Advances in theory, applications and trends

    Get PDF
    Deep Learning (DL), a groundbreaking branch of Machine Learning (ML), has emerged as a driving force in both theoretical and applied Artificial Intelligence (AI). DL algorithms, rooted in complex and non-linear artificial neural systems, excel at extracting high-level features from data. DL has demonstrated human-level performance in real-world tasks, including clinical diagnostics, and has unlocked solutions to previously intractable problems in virtual agent design, robotics, genomics, neuroimaging, computer vision, and industrial automation. In this paper, the most relevant advances from the last few years in Artificial Intelligence (AI) and several applications to neuroscience, neuroimaging, computer vision, and robotics are presented, reviewed and discussed. In this way, we summarize the state-of-the-art in AI methods, models and applications within a collection of works presented at the 9 International Conference on the Interplay between Natural and Artificial Computation (IWINAC). The works presented in this paper are excellent examples of new scientific discoveries made in laboratories that have successfully transitioned to real-life applications

    Demand Response in Smart Grids

    Get PDF
    The Special Issue “Demand Response in Smart Grids” includes 11 papers on a variety of topics. The success of this Special Issue demonstrates the relevance of demand response programs and events in the operation of power and energy systems at both the distribution level and at the wide power system level. This reprint addresses the design, implementation, and operation of demand response programs, with focus on methods and techniques to achieve an optimized operation as well as on the electricity consumer

    Comparative Study of Takagi-Sugeno-Kang and Madani Algorithms in Type-1 and Interval Type-2 Fuzzy Control for Self-Balancing Wheelchairs

    Get PDF
    This study examines the effectiveness of four different fuzzy logic controllers in self-balancing wheelchairs. The controllers under consideration are Type-1 Takagi-Sugeno-Kang (TSK) FLC, Interval Type-2 TSK FLC, Type-1 Mamdani FLC, and Interval Type-2 Mamdani FLC. A MATLAB-based simulation environment serves for the evaluation, focusing on key performance indicators like percentage overshoot, rise time, settling time, and displacement. Two testing methodologies were designed to simulate both ideal conditions and real-world hardware limitations. The simulations reveal distinct advantages for each controller type. For example, Type-1 TSK excels in minimizing overshoot but requires higher force. Interval Type-2 TSK shows the quickest settling times but needs the most force. Type-1 Mamdani has the fastest rise time with the lowest force requirement but experiences a higher percentage of overshoot. Interval Type-2 Mamdani offers balanced performance across all metrics. When a 2.7 N control input cap is imposed, Type-2 controllers prove notably more efficient in minimizing overshoot. These results offer valuable insights for future design and real-world application of self-balancing wheelchairs. Further studies are recommended for the empirical testing and refinement of these controllers, especially since the initial findings were limited to four-wheeled self-balancing robotic wheelchairs

    Short Papers of the 11th Conference on Cloud Computing Conference, Big Data & Emerging Topics (JCC-BD&ET 2023)

    Get PDF
    Compilación de los short papers presentados en las 11vas Jornadas de Cloud Computing, Big Data & Emerging Topics (JCC-BD&ET2023), llevadas a cabo en modalidad híbrida durante junio de 2023 y organizadas por el Instituto de Investigación en Informática LIDI (III-LIDI) y la Secretaría de Posgrado de la Facultad de Informática de la UNLP en colaboración con universidades de Argentina y del exterior.Facultad de Informátic
    corecore